Name of Symposia: S17 - Special Symposium: Additive manufacturing (3D printing) |
S17-451 Keynote
|
RHEOLOGICAL BEHAVIOR OF PLA DURING FDM PROCESS Abbas Tcharkhtchi
|
Not avalaible |
S17-192 Keynote
|
Integration of sensors in polymer parts produced with Laser Sintering (LS) Philipp Stoll, Manfred Schmid, Margret Schmock von Ohr, Konrad Wegener
|
S17-310 Keynote
|
Additive Manufacturing of Large Parts by an Extrusion based Hybrid Approach Christian Hopmann, Lukas Pelzer
|
S17-44 Keynote
|
Kinetic and photorheological investigation of ternary photopolymerization system for stereolithography (SLA) Ayumi Nishimura, Ken Tanaka, Hiroshi Yamamoto, Kentaro Taki
|
Not avalaible |
S17-452 Keynote
|
Coaxial Additive Manufacturing of Continuous Fiber-Reinforced Composites Bahattin Koc, Asif Suleman, Gokcer Gizem
|
Not avalaible |
S17-453 Keynote
|
Polymeric Systems Used in Medical Applications: 3D Bioplotted Scaffolds for Tissue Engineering Applications Nesrin Hasirci
|
Not avalaible |
S17-475 Keynote
|
Multifunctional CNTs Reinforced PEI Filaments for Fused Deposition Modeling Elif Ozden Yenigun, Hulya Cebeci, Ozge Kaynan, Alptekin Yildiz, Yunus Emre Bozkurt
|
Not avalaible |
S17-480 Keynote
|
Synopsis on Damage Analysis and Monitoring in Composite Materials through Experimental and Numerical Approaches Mehmet Yildiz
|
Not avalaible |
S17-109 Oral
|
From Processing to Properties: understanding the key steps for Selective Laser Sintering Fabio Paollucci, Leon Govaert, Gerrit Peters
|
Not avalaible |
S17-22 Oral
|
The Crystallization and Property Studies of Modified Polypropylene in Fuse Deposition Modeling Process MU DONG
|
Not avalaible |
S17-257 Oral
|
Design and development of new polymer powders at EOS for 3D printing applications Stoyan Frangov, Karl Freihart
|
Not avalaible |
S17-29 Oral
|
A Comparative Analysis of the Shape Memory Properties of Thermoplastic Polyurethane Processed by 3D Printing and Injection Moulding Islam Aminul
|
Not avalaible |
S17-256 Oral
|
3D Printing for Flexible Energy Storage Applications Chuhong Zhang
|
Not avalaible |
S17-252 Oral
|
Pregelatinized Starch- Mango Hydrocolloid Characterization for 3D Food Printing Juliana Carolina Montoya, Jorge Alberto Medina, Rodrigo Marín, Daniel Cortes, Blanca Rodríguez, Janet Gutierrez, Arturo Molina, Sergio Serna, Jorge Welti
|
Not avalaible |
S17-290 Oral
|
Effect of Shear and Extensional Flows on Liquid Filler Morphology in Additive Manufacturing David I Bigio, Aditya N Sangli
|
Not avalaible |
S17-272 Oral
|
Optimized Manual Serial Sectioning Method for Studying the Pore Surface Topology of Sintered Porous Polymers Amir Mahdi Salehi, Gholamreza Pircheraghi, Reza Foudazi
|
Not avalaible |
S17-200 Oral
|
Mechanical behaviour of scaffold-like structures: Research of relationships between properties and geometry Claudia Pagano, Lara Rebaioli, Francesco Baldi, Irene Fassi
|
S17-292 Oral
|
ANALYSIS OF POROSITY DISSOLUTION IN SLS PROCESS Gilles REGNIER
|
Not avalaible |
S17-152 Oral
|
Carbon fibre reinforced thermoplastics for material extrusion additive manufacturing Joamin Gonzalez-Gutierrez, Manuel Treitler, Martin Spoerk, Florian Arbeiter, Stephan Schuschnigg, Herfried Lammer, Maximilian Lackner, Mohamed Aburaia, Guenther Poszvek, Haiguang Zhang
|
S17-108 Oral
|
Particle-Specific Design of a Grafted Copolymer Enables Highly-Loaded Ceramic Inks for Extrusion-Based 3D Printing Zahra Gohari Bajestani, Omid Akhlaghi, Can Akaoglu, Ferdows Afghah, Navid Khani, Amin Hodaei, Bahattin Koc, Ozge Akbulut
|
Not avalaible |
S17-104 Oral
|
A trouble-free first layer adhesion for polypropylene-based materials in material extrusion-based additive manufacturing Martin Spoerk, Joamin Gonzalez-Gutierrez, Christof Lichal, Hrvoje Cajner, Gerald Roman Berger, Stephan Schuschnigg, Ludwig Cardon, Clemens Holzer
|
S17-102 Oral
|
Influence of the building chamber temperature on the processability of polypropylene by additive manufacturing. JULIEN LE BOTERFF, SEBASTIEN CHARLON, JEREMIE SOULESTIN
|
Not avalaible |
S17-113 Oral
|
Extrusion-based 3D Printing of Yttria-stabilized Zirconia Nanoparticles through the Presence of Single Polymer Additive Wael Ali Saeed Aldulaimi, Can Akaoglu, Ferdows Afghah, Bahattin Koc, Ozge Akbulut
|
Not avalaible |
S17-171 Oral
|
Transient Non-isothermal Simulation of FDM 3D Printer Nozzle Region Onur Hıra, Oğuzhan Emre Akbaş, Atakan Altınkaynak
|
Not avalaible |
S17-426 Oral
|
Development of Eco-Friendly Composites Based on Polypropylene and Cellulose for Additive Manufacturing (Fused Deposition Modeling) Elena Mastalygina, Petr Pantyukhov , Alessio Massironi , Dario Puppi, Andrea Morelli, Federica Chiellini
|
S17-60 Oral
|
The Rheology of the Sol/Gel Phase Transition of PEOT/PBT Block Copolymers for Bio-Scaffold 3D Printing Veronica Vanzanella, Michele Sisani, Marco Scatto, Nino Grizzuti
|
Not avalaible |
S17-5 Oral
|
Additive Manufacturing For Extrusion Tooling Senne Van den Broeck
|
S17-45 Oral
|
Selective Laser Sintering of Polyamide11/ Barium Titanate Piezoelectric Composite Powder Ning Chen, Fangwei Qi, Qi Wang
|
Not avalaible |
S17-430 Oral
|
A contribution towards predicting cooling and adhesion of simple parts produced by FDM Jose A. Covas, S. F. Costa, F. M. Duarte
|
Not avalaible |
S17-429 Oral
|
Melt electrospinning direct writing of micro-coiled structures Afghah Seyedeh Ferdows , Bahattin Koc
|
Not avalaible |
S17-301 Oral
|
Optimisation of a continuous fibre reinforced additive manufacturing process Willem Van De Steene, Kim Ragaert, Ludwig Cardon
|
Not avalaible |
S17-427 Oral
|
Numerical simulation of heating and deposition of polymer in FDM additive manufacturing Michel Vincent, Franck Pigeonneau, Jean-François Agassant
|
Not avalaible |
S17-110 Oral
|
Rheological Control Enables Printing of Ultra-Lightweight Cement Composite for Warmer Climates Lyn Zemberekci, Wael Ali Saeed Aldulaimi, Rotana Hay, Can Akaoglu, Michael A. Davis, Kemal Celik, Ozge Akbulut
|
Not avalaible |
S17-425 Oral
|
3D printed heat pipes Thomas Joffre
|
Not avalaible |
S17-376 Oral
|
3D printed PLA Nerve Conduits : Fabrication and Characterization Pooja Bhati, Ankita Sharma, Chhavi Teotia, Manoj Soni
|
Not avalaible |
S17-371 Oral
|
Fabrication and Characterization of 3D Printed PLA Scaffold Jassimran Kaur Arora, Pooja Bhati
|
S17-334 Oral
|
Fabrication of FDM 3D Printed Multi-Functional Polylactic Acid/Graphene Nanocomposites and Parts via Local Enrichment Strategy Shaohong Shi, Jingjing Jing, Lu Yang, Yinghong Chen
|
Not avalaible |
S17-82 Oral
|
Design of 3D Scaffold Geometries for Optimal Biodegradation of Poly(lactic acid)-Based Bone Tissue Pedram Karimipour-Fard, Remon Pop-Iliev, Holly Jones-Taggart, Ghaus Rizvi
|
S17-317 Oral
|
3D printing of conductive nanocomposite based CNT by fused deposition molding Nadir Kchit, Marie Hurtgen
|
Not avalaible |
S17-428 Oral
|
Novel Use of 3D Printing For Manufacturing Arbitrary Shaped Mesoporous Polymer Constructs Sadhan C. Jana, Nicholas Teo, Piljae Joo, Eirc Amis
|
Not avalaible |
S17-36 Poster
|
Characteristics of Poly Ether Imide Powder for SLS 3-D Printing Jeongbin Park, Doowhan Kang, Donghyun Lee, Ho Jong Kang
|
Not avalaible |
S17-353 Poster
|
3D Printable Thermal-Energy-Storage Crystalline Gels Using Mask-Projection Stereolithography Yuchen Mao, Takuya Miyazaki, Kohei Sakai, Jin Gong, Meifang Zhu, Hiroshi Ito
|
Not avalaible |
S17-137 Poster
|
Cross-section morphology of material extrusion type 3D printing manufactured articles In Young Woo, Daegi Hong, Sun Chul Jin, Min-Young Lyu
|
Not avalaible |
S17-116 Poster
|
A Particle-Specific Design of Additives to Realize High Purity Inks of Iron Oxide for Extrusion-Based Printing Amin Hodaei, Omid Akhlaghi, Navid Khani, Tunahan Aytas, Dilek Sezer, Buse Tatli, Ece Gunay, Yusuf Ziya Menceloglu, Bahattin Koc, Ozge Akbulut
|
Not avalaible |