Name of Symposia: S04 - Injection molding |
S04-172 Keynote
|
Processing of Ultra-High Molecular Weight Polyethylene (UHMWPE) with Regular and Special Injection Molding Technologies Lih-Sheng Turng
|
S04-33 Keynote
|
Properties of polypropylene/mutilwalled carbon nanotube micromoldings Shengtai Zhou, Andrew Hrymak, Musa Kamal
|
Not avalaible |
S04-269 Oral
|
Effects of Different In-Flow Strategies on Weld Line Strength in Injection Molding of Fiber-Reinforced Polypropylene. Andrea Scantamburlo, Luca Gazzola, Marco Sorgato, Giovanni Lucchetta
|
Not avalaible |
S04-160 Oral
|
MODELING OF CUMULATIVE DAMAGE OF NON-RETURN VALVES FOR PREDICTIVE MAINTENANCE APPLICATIONS Simon Rocker, Chen-Liang Zhao, Reinhard Schiffers
|
Not avalaible |
S04-194 Oral
|
Rheological characterization of thermoplastics reinforced with natural fibers for the simulation of injection mold filling Antoine DUPUIS
|
Not avalaible |
S04-225 Oral
|
Development of the monitoring methods of the venting hole clogging in injection mold Bongju Kim, Jinsu Gim, Joohyeong Jeon, Taejoon Jeong, Eunsu Han, Byungohk Rhee
|
S04-228 Oral
|
Development of a screw-mounted temperature sensing system to measure the melt temperature during plasticizing of the injection molding Joohyeong Jeon, Eunsu Han, Jinsu Gim, Bongju Kim, Taejoon Jeong, Byungohk Rhee
|
S04-131 Oral
|
Numerical Simulation for Predicting Sink Marks on Injection Molding and Injection Compression Molding Process Enzo Chen
|
S04-262 Oral
|
Effects of rapid cavity temperature variations on the crystallinity of PLA Annarita De Meo, Felice De Santis, Roberto Pantani
|
S04-271 Oral
|
Effect of laserinduced periodic surface structures in the selfcleaning properties of venting in injection molding Marco Sorgato, Filippo Zanini, Davide Masato, Giovanni Lucchetta
|
Not avalaible |
S04-282 Oral
|
Numerical analysis of the micro injection molding cycle of Poly(oxymethylene) POM Anass BENAYAD, Mhamed BOUTAOUS, Rabie EL OTMANI, Abdelhadi EL HAKIMI, Abdelhamid TOUACHE, Khalid KANDOUSSI, Musa.R KAMAL, Salim DERDOURI, Zakariaa REFAA
|
Not avalaible |
S04-287 Oral
|
Effects of micro-milled NiP mold surface topography on the optical characteristics of injection molded prismatic retroreflectors Nicola Milan, Marco Sorgato, Giovanni Lucchetta
|
Not avalaible |
S04-296 Oral
|
Slip of polypropylene melts over laser-induced periodic nano-structures having different dimensions Giovanni Lucchetta, Marco Sorgato, Leonardo Piccolo, Davide Masato, Leonardo Orazi
|
Not avalaible |
S04-306 Oral
|
Simulation of Interface Strength for a Two-Component Injection Moulded Wheel Product of HDPE and EPDM Rubber Wim Six, Gert-Jan Bex, Jozefien De Keyzer, Albert Van Bael, Frederik Desplentere
|
S04-49 Oral
|
Comparison of additive and conventional manufactured injection molding inserts Thomas Mitterlehner, Georg Steinbichler
|
S04-56 Oral
|
Optimization of micro-injection molding replication for quick response code applications Francesco Regi, Mads Emil Brix Doest, Dongya Li, Yang Zhang, Jeppe Revall Frisvad, Guido Tosello
|
Not avalaible |
S04-57 Oral
|
Influences of micro-ridges orientation and density on the replication of micro-structured surfaces by Injection Molding Francesco Regi, Alberto Basso, Dario Loaldi, Martin Kain, Dongya Li, Yang Zhang, Guido Tosello
|
S04-83 Poster
|
Effect of flow rate and melt temperature on film thickness distribution in film insert injection molding process Showmik Azam, Bong-Kee Lee
|
Not avalaible |
S04-176 Poster
|
Enhanced heat resistance and mechanical properties of stereocomplex-type polylactide by constructing double melting peaks in the nascent powder Zhenwei Liu, Shihao Deng, Hongwei Bai, Qin Zhang, Qiang Fu
|
Not avalaible |
S04-62 Poster
|
Experimental study on the effect of local microstructures on the shrinkage distribution in injection molded product Yao Gong, Van Thanh Hoang, Jang Min Park
|
Not avalaible |
S04-15 Poster
|
Intelligent parameter optimization of injection molding process Shih-Chih Nian, Ming-Shyan Huang, Yung-Chin Fang
|
S04-138 Poster
|
Adhesion strength according to metal surface treatment in metal insert molded specimen In Young Woo, Hyosang Pak, Sung Woong Jang, Min-Young Lyu
|
Not avalaible |
S04-136 Poster
|
Enhanced fracture energy during deformation through the construction of an alternating multilayered structure for polyolefin blends Yi Zhou, Hua Deng, Li Yuan, Yumin Chen, Shanshan Zhang, Qiang Fu
|
Not avalaible |
S04-229 Poster
|
Porous Ceramic Structures for Medical Applications via Powder Injection Molding Jakub Huba, Berenika Hausnerova
|
Not avalaible |