Name of Symposia: S12 - Process modeling and simulations |
S12-107 Keynote
|
A NOVEL STRUCTURE-PERMEABILITY CORRELATION IN RANDOM AND AGGREGATED FIBER ARRAYS Thanasis Papathanasiou
|
Not avalaible |
S12-201 Keynote
|
Morphology distribution within injection molded parts, interpretation on the basis of stretch and work evolutions Giuseppe TItomanlio, Vito Speranza, Sara Liparoti, Roberto Pantani
|
S12-129 Keynote
|
Some Experiences in Problem Solving with the help of Rheology and Flow Simulation JOHN VLACHOPOULOS
|
Not avalaible |
S12-294 Oral
|
PROCESS SIMULATION OF PEI-CF/PEEK HYBRID THERMOPLASTIC COMPOSITE MANUFACTURING SETUP OMAR BAHO, Gilles Ausias, Julien Férec
|
Not avalaible |
S12-151 Oral
|
Grid Generation and Process Simulation of an Injection Molding Plasticizing Unit with Focus on Barrier Screws Dominik Altmann, Georg Steinbichler
|
Not avalaible |
S12-154 Oral
|
Modelling and simulation of thermoset injection molding process Ngoc Tu Tran, Michael Gehde
|
S12-179 Oral
|
Study on Deformation Behavior of Resin Cylinder under Biaxial Stress Sohta KUBO, Takuya Sumiyama, Toshihiko Kuwabara, Takaya Kobayashi, Kenji Furuichi, Chisato Nonomura
|
Not avalaible |
S12-196 Oral
|
Capillary Flow of Ionomers and their Corresponding Copolymers: Effects of Ionic and Hydrogen Bonding Associations Evan Mitsoulis, Tanja Tomkovic, Savvas G. Hatzikiriakos
|
Not avalaible |
S12-238 Oral
|
Application of a Fiber Dependent Rheological Model to Injection Molding Flows Franco S Costa, Vishak Perumal, Sati Bhattacharya, Rahul Gupta
|
Not avalaible |
S12-141 Oral
|
Influence of processing conditions on the crystallization behavior of polymers Markus Peter Schubnell
|
Not avalaible |
S12-286 Oral
|
Warp optimization of plastic part by numerical simulation. ismail Mutlu, Levent Saraç, Yeşim Aslan
|
Not avalaible |
S12-339 Oral
|
Determination of anisotropic CTE to model processing introduced effects on thermal behavior of PE parts Bernhard Moeginger, Esther Ramakers-van Dorp, Berenika Hausnerova
|
Not avalaible |
S12-471 Oral
|
Influence of process parameters on the rheological and thermodynamical behavior of ultra-high molecular weight compounds Thomas Unger, Lars Klocke, Kevin Herrington, Jürgen Miethlinger
|
Not avalaible |
S12-52 Oral
|
Non-standard warpage prediction for short fiber-reinforced thermoplastic components Armin Kech, Valérie Le Baube, Viven Le Baube
|
S12-53 Oral
|
An Efficient Parameter Identification for Macroscopic Fiber Orientation Models with Experimental Data and a Mechanistic Fiber Simulation Susanne Katrin Kugler, Gregory Lambert, Camilo Cruz, Armin Kech, Tim Osswald, Donald Baird
|
S12-55 Oral
|
Modelling the filling behavior of micro structured plastic optical components Dario Loaldi, Danilo Quagliotti, Matteo Calaon, Guido Tosello
|
Not avalaible |
S12-112 Oral
|
New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method Volker Schöppner, Frederik Sporkmann
|
S12-114 Oral
|
Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation Frederik Sporkmann, Volker Schöppner
|
S12-128 Oral
|
Role of Flow-Type on the Fiber Orientation Prediction in Injection Molding Hongyu Chen, Peter Wapperom, Donald Baird
|
S12-260 Oral
|
Effect of Body Forces and Particle Size Ratio on the Rheology and Microstructure of Dense Suspensions in Confined Flows Erika Imada Barcelos, Shaghayegh Khani, Arman Boromand, Mônica Feijó Naccache, João Maia
|
Not avalaible |
S12-233 Poster
|
Polymer Sealing by Heat Transfer Modelling Felice De Santis, Auli Nummila-Pakarinen
|
S12-193 Poster
|
Structural Analysis of fiber- reinforced polymer Composites electrical Poles – An Uruguayan Study. Pablo Raimonda, Carolina Perez, Daniel Mosca
|
Not avalaible |