Name of Symposia: S07 - Processing (injection moulding, extrusion, blow moulding, thermoforming) |
S07-193 Keynote
|
Invigorating translational R&D in South Africa Polymer Industry: A case of DST/CSIR Nanomaterials Industrial Development Facility Vincent Omondi Ojijo
|
Not avalaible |
S07-226 Keynote
|
Film blowing of PHA-based systems for home compostable food packaging films Paulo F Teixeira, José A Covas, Loic Hilliou
|
Not avalaible |
S07-131 Keynote
|
Transient rheology of polymer composites coupled with evolving fibre orientation and concentration Sati N Bhattacharya, Vishak Perumal, Rahul K Gupta, Franco S Costa
|
Not avalaible |
S07-214 Keynote
|
New Dimensions in Layer Multiplication Co-Extrusion: Tubes, Bags, Pipes and Bottles Tyler Schneider, Joao Maia
|
Not avalaible |
S07-135 Keynote
|
Application of Process Simulation in Polymer Materials Development Ines Kuehnert, Matthieu Fischer, Yvonne Spoerer, Reinhard Fechter, Leijie Liang
|
Not avalaible |
S07-43 Keynote
|
Relationship between structure and properties within the injection molded objects: experiments and modeling Sara Liparoti, Vito Speranza, Giuseppe Titomanlio, Roberto Pantani
|
Not avalaible |
S07-174 Keynote
|
High Energy Electrons – an innovative activator in reactive compounding processes, an overview of chances and challenges Michael Thomas Mueller, Carsten Zschech, Uwe Gohs, Udo Wagenknecht
|
Not avalaible |
S07-138 Oral
|
Data Driven Modeling in Polymer Recycling - Modeling the Pressure Loss of Non-Newtonian Polymer Melt Flows in Melt Filtration Systems Sophie Pachner, Wolfgang Roland, Michael Aigner, Ursula Stritzinger, Jürgen Miethlinger
|
Not avalaible |
S07-206 Oral
|
Computational Rheology et al. @ UMinho Joao Miguel Nóbrega, Célio Fernandes, Olga Sousa Carneiro
|
Not avalaible |
S07-20 Oral
|
Investigation of Temperature Increase by Microwave Application in Material Drying Tobias Schaible, Oliver Kast, Christian Bonten
|
Not avalaible |
S07-2 Oral
|
Prediction of the Mechanical Properties of Long Fiber Reinforced Thermoplastics Fabian Willems, Christian Bonten
|
Not avalaible |
S07-197 Oral
|
The influence of processing on the mechanical properties and emissions of a recycled polyolefin Thomas Höftberger, Christoph Burgstaller
|
Not avalaible |
S07-95 Oral
|
Processing strategies for nano-level dispersion of clay platelets in polypropylene matrix. Dimakatso Ria Makwakwa
|
Not avalaible |
S07-182 Oral
|
Effect of Layer Multiplicity on the performance of Blown Film Rakgoshi Lekalakala, John Letwaba, Mary Khoza, Raphahle Mekoa, Simphiwe Zungu, Sifiso Skosana, OJ Bothloko, Vincent Ojijo, Jayita Bandyopadhyay, Suprakas Sinha Ray
|
Not avalaible |
S07-27 Oral
|
Calibration of Models to Predict the Fiber Microstructure of LFRT Philip Reitinger, Fabian Willems, Christian Bonten
|
Not avalaible |
S07-13 Oral
|
INVESTIGATION OF THE IMPREGNATION QUALITY OF THERMOPLASTIC TAPES USING AIR-COUPLED ULTRASOUND Wolfgang Essig, Marc Kreutzbruck
|
Not avalaible |
S07-12 Oral
|
Approach for the Description of PvT-behavior of Thermoplastics at High Cooling Rates Felix Baumgärtner, Christian Bonten
|
Not avalaible |
S07-139 Oral
|
Inline Material Characterisation for Mechanical Recycling of Polymers Stephanie Haider, Michael Aigner, Lukas Kammerer, Gabriel Kronberger, Sabine Hild
|
Not avalaible |
S07-107 Oral
|
Determination and calculation of the water influence on the viscosity profile of anionic polyamide 6 and its compensation Rainer Wendel, Philipp Rosenberg, Frank Henning
|
Not avalaible |
S07-172 Oral
|
An Experimental Study on Process-oriented Scale-up / Scale-down in Blown Film Extrusion Christoph Dohm, Reinhard Schiffers
|
Not avalaible |
S07-169 Oral
|
Condition Monitoring for Injection Molding Screws Sebastian Fruth, Stefan Kruppa, Reinhard Schiffers
|
Not avalaible |
S07-163 Oral
|
Comparison of feature selection methods for machine learning based injection molding quality prediction Alexander Schulze Struchtrup, Dimitri Kvaktun, Reinhard Schiffers
|
Not avalaible |
S07-153 Oral
|
Upscaling of a Continuous Electron Induced Reactive Processing for High-Performance Polymers Carsten Zschech, Udo Wagenknecht, Mathias Pech, Michael Müller, Sven Wießner, Uwe Gohs
|
Not avalaible |
S07-194 Oral
|
PREDICTIVE MAINTENANCE USING CLASSIFICATION AND REGRESSION METHODS FOR NON-RETURN VALVES IN INJECTION MOLDING MACHINES Chen-Liang Zhao, Johannes Knott, Reinhard Schiffers
|
Not avalaible |
S07-46 Oral
|
A Hybrid Modeling Approach to Predicting the Flow in Single-Screw Extruders: Part B. Model Validation Christian Marschik, Wolfgang Roland, Juergen Miethlinger, Georg Steinbichler
|
Not avalaible |
S07-9 Oral
|
Recyclates made of Cast Polyamide 6 and Carboxylic Acid Axel Grebhardt, Benjamino Formisano, Christian Bonten
|
Not avalaible |
S07-84 Oral
|
Application of machine learning in PVC profile extrusion Maximilian Prechtl
|
Not avalaible |
S07-82 Oral
|
Hot Gas Welding – Influences of the Tool Design Mirko Albrecht, Michael Gehde, Max Bialaschik, Volker Schöppner
|
Not avalaible |
S07-80 Oral
|
Application of a Convolutional Neural Network in Polymer Injection Foam Molding Eva Maria Kobler, Clemens Kastner, Georg Steinbichler
|
Not avalaible |
S07-8 Oral
|
THREE-DIMENSIONAL MODELING OF THE THERMOPLASTIC PA6 IN-SITU-PULTRUSION Alptekin Celik, Christian Bonten
|
Not avalaible |
S07-78 Oral
|
A NOVEL METHOD FOR EFFICIENT ENGINEERING DESIGN OF SHEET DIES BY MEANS OF FLUID DYNAMICS Alptekin Celik, Christian Bonten
|
Not avalaible |
S07-56 Oral
|
Heated tool welding of thick-walled components Fabian Friedrich
|
Not avalaible |
S07-136 Oral
|
Simulation of Flow through an Injection Molding Machine Non-return Valve; Influence of Material Parameters Reinhard Fechter, Leijie Liang, Matthieu Fischer, Ines Kuehnert
|
Not avalaible |
S07-23 Oral
|
Investigation on the Processability of Sheets for Thermoforming Dominik Müller, Christian Bonten
|
Not avalaible |
S07-48 Oral
|
A Hybrid Modeling Approach to Predicting the Flow in Single-Screw Extruders: Part A. Model Development Wolfgang Roland, Christian Marschik, Juergen Miethlinger, Georg Steinbichler
|
Not avalaible |
S07-14 Oral
|
Smart Machines: A New Approach for Optimizing the Residual Cooling Time in Injection Molding Alexander Geyer, Christian Bonten
|
Not avalaible |
S07-45 Oral
|
Rheology and Simulation Studies on Single-Screw Extrusion of Wood-Polymer Composites Krzysztof Wilczyński, Kamila Buziak, Adrian Lewandowski, Krzysztof J. Wilczyński, Andrzej Nastaj
|
Not avalaible |
S07-44 Oral
|
Rheology and Simulation Studies on Single-Screw Extrusion of Wood-Polymer Composites Krzysztof Wilczyński, Kamila Buziak, Adrian Lewandowski, Krzysztof J. Wilczyński, Andrzej Nastaj
|
Not avalaible |
S07-4 Oral
|
MODIFICATION OF STANDARD POLYAMIDES FOR BLOW MOLDING Julia Dreier, Svenja Murillo Castellón, Christian Bonten
|
Not avalaible |
S07-32 Oral
|
Benchmark Study of The Weathering of Engineering Resins Saleh Alkarri
|
Not avalaible |
S07-31 Oral
|
NUMERICAL 3D SIMULATION OF A CO-KNEADER IN OPENFOAM Julian Kattinger, Jochen Kettemann, Christian Bonten
|
Not avalaible |
S07-30 Oral
|
Application of the Immersed Boundary Surface Method in OpenFOAM Jochen Kettemann, Christian Bonten
|
Not avalaible |
S07-28 Oral
|
Influence of Injection Molding Parameters on the Quality of Structured Surfaces Richard Schönlein, Tobias Schaible, Christian Bonten
|
Not avalaible |
S07-24 Oral
|
Influence of the Fiber Preheating in In-situ Pultrusion of Continuous Fiber-reinforced Thermoplastic Profiles Philipp Thieleke, Christian Bonten
|
Not avalaible |
S07-49 Oral
|
The moving least square aided finite element method (MLS-FEM): a powerful means to evaluate mixing phenomena in fully filled polymer mixing devices Mehdi Mostafaiyan, Sven Wiessner, Gert Heinrich
|
Not avalaible |
S07-218 Poster
|
Novel approach for compression molding of HT-PEM bipolar plates using inductive heating André Kayser, Susanne Palecki
|
Not avalaible |
S07-50 Poster
|
The moving least square aided finite element method (MLS-FEM): a powerful means to evaluate mixing phenomena in a partially filled internal batch mixer with free surface flow Mehdi Mostafaiyan, Sven Wiessner, Gert Heinrich
|
Not avalaible |
S07-75 Poster
|
Adopting Pressure Measurements to On-Line Estimate the Shrinkage in Polycarbonate Injection Molded Part. Vito Speranza, Roberto Pantani
|
Not avalaible |
S07-216 Poster
|
Large, thin, fully structured and cheap injection molded bipolar plate based on PPS for HT-PEM-fuel-cells Marco Grundler, Matthäus Majewski
|
Not avalaible |
S07-11 Reject
|
Abstract withdrawn Alptekin Celik, Christian Bonten
|
Not avalaible |