| Name of Symposia: S11 - Additive Manufacturing |
S11-289
Keynote
|
Direct Printing of High-Performance Thermoplastic Connection and Stiffening Elements by Fused Filament Fabrication
Andressa Seefeldt, Marcel Dippold, Julia Gensel, Thomas Neumeyer, Volker Altstädt
|
S11-558
Keynote
|
Geometrical effects on cooling and adhesion of parts made by Fused Deposition Techniques
Sidonie F Costa, Fernando Moura Duarte, Jose Antonio Covas
|
Not avalaible |
S11-851
Keynote
|
Additive manufacturing of multifunctional and multimaterial composite structures
Daniel Therriault
|
Not avalaible |
S11-413
Keynote
|
Modeling of Sintering: Beyond Two Equal Sized Spherical particles
JOHN VLACHOPOULOS, NICKOLAS POLYCHRONOPOULOS
|
Not avalaible |
S11-386
Keynote
|
Direct Ink Writing Based Rapid Throughput Method For Printing Of Ultrathin Stretchable Electronic Materials
Piljae Joo, Sadhan C Jana, Eric J Amis
|
Not avalaible |
S11-350
Keynote
|
Mechanical Properties and Surface Roughness of 3D Printing Biodegradable Ternary Blends and Its Composites
Wattanachai Prasong, Paritat Muanchan, Supaphorn Thumsorn, Takashi Kurose, Hiroshi Ito
|
Not avalaible |
S11-419
Oral
|
MECHANICAL CHARACTERIZATION AND NUMERICAL MODELING OF LASER-SINTERED TPE LATTICE STRUCTURES
Christina Kummert, Lena Risse, Gunter Kullmer, Hans-Joachim Schmid
|
Not avalaible |
S11-422
Oral
|
Fabrication and characterization of fiber-reinforced PEEK thermoplastic 3D printing filaments
Audrey Diouf Lewis, Yahya Abderrafai, Filippo Iervolino, Juliette Pierre, Rouhollah Farahani, Nicola Piccirelli, Daniel Therriault
|
Not avalaible |
S11-427
Oral
|
Laser sintering of PA12 particle pairs studied by in-situ optical and X-ray characterization
Prakhyat Hejmady, Lambčrt C.A. van Breemen, Patrick D. Anderson, Ruth Cardinaels
|
Not avalaible |
S11-402
Oral
|
Effect of the post-curing treatment on the thermal and mechanical characterization of additively manufactured photopolymers
Esmeray Üstünyagiz, Macarena Mendez Ribo, Anna Halina Danielak, David Bue Pedersen
|
Not avalaible |
S11-474
Oral
|
Fluid Addition in Polymer based Additive Manufacturing
Shri Harsha Bharadwaj, David Bigio
|
Not avalaible |
S11-391
Oral
|
3D printing of abradable polymer composite materials: Materials formulations and characterization
Rouhollah DERMANAKI FARAHANI, Iee Lee Hia, David Brzeski, Audrey Diouf Lewis, Nicola Piccierelli, Daniel Therriault
|
Not avalaible |
S11-478
Oral
|
3D printing challenge of high processing temperature composite materials
Yahya Abderrafai, Audrey Diouf Lewis, Juliette Pierre, Rouhollah Farahani, Nicola Piccirelli, Martin Lévesque, Daniel Therriault
|
Not avalaible |
S11-512
Oral
|
Analysis of the crystallization kinetics in SLS 3D printing
Patrick Anderson
|
Not avalaible |
S11-52
Oral
|
Method for Evaluating Binder Performance for Three-Dimensional Printing
Sergio Ivan Yanez Sanchez, Alice Goffin, David Schlachter, Somayeh Hosseini Rad, Martin Lennox, Basil D. Favis, Daniel Therriault, Jason Robert Tavares
|
Not avalaible |
S11-53
Oral
|
Mechanical improvement of green metallic parts printed by binder-jet 3D printing
Somayeh Hosseini Rad, Sergio Iván Yáńez Sánchez , Alice Goffin , David Schlachter , Martin Lennox , Basil Favis , Daniel Therriault , Jason Robert Tavares
|
Not avalaible |
S11-547
Oral
|
A Methodical Approach to a Feature-Specific Characterization of the Processing Suitability of Thermoplastic Polymers in the Fused Deposition Modeling Process
Christian Schumacher, Volker Schöppner
|
Not avalaible |
S11-445
Oral
|
3D bioplotting of biodegradable PCL-based blends
Salim Gopi, Marianna Kontopoulou
|
Not avalaible |
S11-17
Oral
|
Analysis of the energy input during the sintering process of polyamide 12
Moritz Grünewald, Stephanie Baumann, Kevin Popp, Marieluise Lang, Martin Bastian, Shoya Mohseni-Mofidi, Claas Bierwisch, Johannes Rudloff
|
Not avalaible |
S11-392
Oral
|
Fused filament fabrication process window for good interlayer bonding: Application to highly filled polymers in metallic powder
Alexis Theze, Gilles Régnier, Alain Guinault, Sébastien Richard, Bruno Macquaire
|
Not avalaible |
S11-556
Oral
|
Characterization of plastic powders for laser powder bed fusion
Jochen Schmidt, Maximilian A. Dechet, Juan S. Gómez Bonilla, Nicolas Hesse, Andreas Bück, Wolfgang Peukert
|
Not avalaible |
S11-360
Oral
|
Investigation on the accuracy, hardness, and surface roughness of photopolymerization 3D printing technique objects
Muammel M. Hanon, László Zsidai
|
S11-336
Oral
|
High Speed Additive Manufacturing and Its Importance for Direct Digital Manufacturing
Aamer Nazir, Jeng Ywan Jeng
|
Not avalaible |
S11-292
Oral
|
Heat Transfer and Coalescence Study for the FFF Additive Manufacturing Process
Arthur LEPOIVRE, Nicolas BOYARD, Arthur LEVY, Vincent SOBOTKA
|
Not avalaible |
S11-286
Oral
|
Production and Characterization of sustainable composite filaments for 3D printing using recycled polypropylene, PLA and natural fibers (cacao and rice husk)
Maria Alejandra Morales Sanchez, Cindy Lorena Atencio, Niyireth Alicia Porras, Camilo Hernández
|
Not avalaible |
S11-285
Oral
|
From Composites to Gradients to Coatings: Stereolithographic 3D Printing of Functional Materials
Kathleen Louise Sampson, Bhavana Deore, Chantal Paquet, Nathan Kredentser, Thomas Lacelle, Patrick R. L. Malenfant
|
Not avalaible |
S11-238
Oral
|
Design and analysis of triply periodic minimal surface structures produced by additive manufacturing for biomedical applications
Pedram Karimipour-Fard, Remon Pop-Iliev, Ghaus Rizvi
|
Not avalaible |
S11-228
Oral
|
3D printing of biocomposites from soy hull and recycled ocean plastic
Benjamin Maldonado-Garcia, Arvind Gupta, Feng WU, Mohamed Abdelwahab, Manjusri Misra, Amar K. MOHANTY
|
Not avalaible |
S11-218
Oral
|
Monitoring and characterization of Hybrid Acrylic/Epoxy DLP-3D Printable Materials
mohamed dkier, Claire Barrčs, Jean-Yves Charmeau
|
Not avalaible |
S11-213
Oral
|
Determination of the stability of PA12 powder during the laser sintering process
Jürgen E.K. Schawe, Michael J Reber
|
Not avalaible |
S11-19
Oral
|
An empirical model for prediction in Fused Filament Fabrication
Michael J Hebda, Philip J Caton-Rose, Ben R Whiteside, Phil J Coates
|
Not avalaible |
S11-396
Oral
|
Selective Laser Sintering 3D Printing of Self Healing Elastomer
Hesheng Xia
|
Not avalaible |
S11-690
Oral
|
The role of plasticizer in FDM of thermoplastic 4D printed composites
Yu-Chen Sun, Hani E Naguib
|
Not avalaible |
S11-89
Oral
|
Design and Evaluation of Bicomponent Core-Sheath Die for 3D Printer Filament Feedstock Co-extrusion
Rebecca Ruckdashel, Shihang Wang, Jay Park, Javier Vera-Sorroche
|
Not avalaible |
S11-816
Oral
|
MultiMatł - Development of Materials and Material Combinations for Arburg Plastic Freeforming (APF) and Fused Filament Fabrication (FFF)
Ines Kuehnert, Reinhard Fechter, Therese Schueler, Florian Klemm
|
Not avalaible |
S11-814
Oral
|
In-Situ Melt Characterization for Material Extrusion Additive Manufacturing
Austin Colon, David Kazmer, Amy Peterson
|
Not avalaible |
S11-809
Oral
|
Influence of glass fibers on the processability and mechanical properties of polypropylene (PP) homopolymer for fused filament fabrication (FFF)
Julia Utz, Nico Geis, Maximilian Baur, Holger Ruckdäschel
|
S11-800
Oral
|
Experimentally validated numerical modeling of polymer melting and flow in material extrusion-based additive manufacturing
Rebecca Wolff, Hogenrich Damanik, Arooj Fatima, Stefan Turek, Johannes Rudloff, Benjamin Baudrit, Thomas Hochrein, Martin Bastian
|
Not avalaible |
S11-782
Oral
|
Extrusion 3D printing of PEDOT:PSS and their nanocomposites towards flexible lightweight electromagnetic interference shields
Mohammad Arjmand, Ahmadreza Ghaffarkhah, Milad Kamkar, Saeed Ghaderi
|
Not avalaible |
S11-778
Oral
|
Connecting the altered crystallization kinetics of polyamide 12 during laser sintering to the presence of memory effects originating from thermal history
Charlotte Poisson, Peter Van Puyvelde, Bart Goderis
|
Not avalaible |
S11-760
Oral
|
Particle size distribution of short glass fibers in powder bed fusion of polymers using filled systems
Lydia Lanzl, Dietmar Drummer
|
S11-739
Oral
|
Biodegradation Assessment of 3D Printed Polycaprolactone/Nano-Hydroxyapatite/Chitin-Nano-Whisker Nanocomposites
Pedram Karimipour-Fard, Remon Pop-Iliev, Ghaus Rizvi
|
Not avalaible |
S11-738
Oral
|
Meta-Modeling Based Multi-Objective Optimization of 3D Printed Polycaprolactone/Nano-Hydroxyapatite/Chitin-Nano-Whisker Nanocomposite Bone Tissue Scaffolds
Pedram Karimipour-Fard, Azam Asilian Bidgoli, Shahryar Rahnamayan, Remon Pop-Iliev, Ghaus Rizvi
|
Not avalaible |
S11-717
Oral
|
Design of Nozzles for Surface Mount Technologies Produced by Additive Manufacturing
Álvaro M. Sampaio
|
S11-553
Oral
|
Additive-enhanced and composite polyamide 11 particles for powder bed fusion via functionalization during precipitation
Maximilian A. Dechet, Wolfgang Peukert, Jochen Schmidt
|
Not avalaible |
S11-697
Oral
|
Potential of five-axis kinematic systems for Additive Manufacturing using Fused Deposition Modelling (FDM)
Joshua Voll, Jonathan Baier, Rene Brunotte, Stefan Roth
|
Not avalaible |
S11-554
Oral
|
Production of micron-sized polymer particles for powder bed fusion via liquid phase processes
Jochen Schmidt, Maximilian A. Dechet, Wolfgang Peukert
|
Not avalaible |
S11-594
Oral
|
3D Printing of Preceramic Polymers by Stereolithography
Hamidreza Yazdani Sarvestani, Michael Jakubinek, Thomas Lacelle, Behnam Ashrafi, Kathleen Sampson, Derek Aranguren van Egmond, Julieta Barroeta Robles, Chantal Paquet
|
Not avalaible |
S11-666
Oral
|
Optimally Graded SLA 3D Printed Cellular Beams
Alireza Seyedkanani, Hamed Niknam, Abdolhamid Akbarzadeh Shafaroudi
|
Not avalaible |
S11-66
Oral
|
Influence of the printing parameters on the crystallization of Polypropylene by the Fused Filament Fabrication process
David Xu, Séverine A.E. Boyer, Alain Burr, Franck Pigeonneau
|
Not avalaible |
S11-98
Oral
|
3D printed sustainable biocomposites from recycled PLA-based bioplastic and micro-crystalline cellulose
Akhilesh Pal, Erick O. Cisneros-López, Arturo Rodriguez-Uribe, Feng WU, Manjusri Misra, Deborah F. Mielewski, Alper Kiziltas, Amar K. MOHANTY
|
Not avalaible |
S11-560
Oral
|
Multiphysics simulation of additive manufacturing process by Fused Filament Fabrication using level set method
Anh Duc Le, Benoît Cosson, André Chateau Akué Asséko, Jérémie Soulestin
|
Not avalaible |
S11-655
Oral
|
Spider-web-inspired transparent impact-resistant composite
Shibo Zou, Daniel Therriault, Frédérick Gosselin
|
Not avalaible |
S11-627
Oral
|
Lubrication approximation for low Reynolds number flow through a converging nozzle for additive manufacturing.
David Bigio, Aditya N Sangli
|
Not avalaible |
S11-564
Oral
|
The Difference in Structure and Properties of 3D Printed Composite Material with Round and Rectangular Die
Naum Naveh
|
Not avalaible |
S11-572
Oral
|
A model approach for the optimization of polymer deposition additive manufacturing process
Sébastien CHARLON
|
Not avalaible |
S11-584
Oral
|
Fracture response of components manufactured using fused deposition modelling: Effects of the component structure
Claudia Pagano, Francesco Baldi, Irene Fassi
|
Not avalaible |
S11-705
Oral
|
Thermoreversible Diels-Alder Thermoset for Selective Laser Sintering (SLS) Applications
Kenneth Cerdan-Gomez, Joost Brancart, Guy Van Assche, Brecht Van Hooreweder, Peter Van Puyvelde
|
Not avalaible |
S11-591
Oral
|
Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming
Felix Hecker, Christian Lennart Elsner, Andre Hirsch, Elmar Moritzer
|
S11-29
Poster
|
Influence of bromine-antimony flame-retardant additives on characterization of flame-retardant laser-sintered poly(butylene terephthalate)
Satoshi Arai
|
S11-67
Poster
|
Influence of printing parameters on PLA layer adhesion in FFF printed parts
Grazielly Stefany Santos da Silva, Milena Gonçalves de Oliveira, Demetrio Jackson dos Santos, Suel Eric Vidotti, Anne Cristine Chinellato
|
Not avalaible |
S11-75
Poster
|
3D printability of nylon 6-based blends: effect of chain extender, impact modifier and printing parameters
Akhilesh K. Pal, Gareth Chapman, Manjusri Misra, Amar K. MOHANTY
|
Not avalaible |
S11-659
Poster
|
A safe green ink for solvent-cast 3D printing
Paulina Latko-Durałek, Ferran Santonja Soto, Daniel Therriault
|
Not avalaible |
S11-384
Poster
|
Impact strength of ME type 3D printing manufactured specimen for deposition condition
Min-Young Lyu, In Young Woo, Sun Chul Jin, Hyung Jin Roh, Sung Hwan Cho
|
Not avalaible |
S11-593
Poster
|
3D printing of elastomers via molten polymer deposition
Sebastien Charlon, Sebastien Alix, Stijn Corneillie, Jeremie Soulestin
|
Not avalaible |
PPS CONFERENCES PROCEEDINGS