| Name of Symposia: S03 - Injection Molding and Micromolding |
S03-333
Keynote
|
Using Microcellular Foaming for Ceramic Powder Injection Process to Improve Molding and Molded Parts Qualities
Shia-Chung Chang, Shou-Nan Li, Che-Wei Chang, Yen-An Chen, Yung-Hsiang Chang, Pi-Lin Tsai, Tzu-Hsiang Wei, Min-Chi Chiu
|
Not avalaible |
S03-537
Keynote
|
Morphology distribution in iPP as a result of the competition between spherulitic and fibrillar crystallization
Sara Liparoti, Vito Speranza, Roberto Pantani, Giuseppe Titomanlio
|
Not avalaible |
S03-388
Keynote
|
In-situ time resolved X-ray studies of structure development in micromoulding
Phil Coates, Yongfeng Men, Ben Whiteside, Fin Caton-Rose, Glen Thompson, Liao Tao
|
Not avalaible |
S03-565
Keynote
|
Investigations on Injection Molding-induced Morphology of Isotactic Polypropylene
Yvonne Spoerer, Regine Boldt, René Androsch, Ines Kuehnert
|
Not avalaible |
S03-355
Keynote
|
Surface Replication of Automotive Polypropylene in Injection Molding Process
Hiroshi Ito, Shinichi Kuroda, Atsushi Mizutani
|
Not avalaible |
S03-495
Oral
|
Characterisation of Electron Beam treated Shape Memory Polymers
Cristina Luminita Tuinea-Bobe, Paul Edward Spencer, John Sweeney, Donal OSullivan, Tom Swift, Paul Wilson, Daniel Lester, Ben R Whiteside
|
Not avalaible |
S03-491
Oral
|
Automatic Process Setup in Injection Molding using a Hybrid Training Approach for Artificial Neural Networks
Christian Hopmann, Mauritius Schmitz, Simon Wurzbacher
|
Not avalaible |
S03-469
Oral
|
Overmolding of SGF-PP onto a Continuous GF-PP Composite
Serkan Akpınar, Merve Metin, Mehmet Kodal, Meltem Sezen, Güralp Ozkoc, M.Cengiz Altan
|
Not avalaible |
S03-39
Oral
|
Investigation of Fiber Orientation and its Influence on Fiber Length Degradation in Simple Shear Flow for Glass Fiber Reinforced Polypropylene
Franziska Bürenhaus, Elmar Moritzer
|
Not avalaible |
S03-379
Oral
|
Correlation between surface energy and polymer contact angle for coated injection molds
Benjamin Letherer, Leonardo Piccolo, Marco Sorgato, Giovanni Lucchetta, Davide Masato
|
Not avalaible |
S03-356
Oral
|
Investigation on the skin layer formation during non-isothermal flow in injection molding
Leonardo Piccolo
|
Not avalaible |
S03-773
Oral
|
Benefit of fused-filament-fabricated (FFF) mold inserts made of plastics for injection molding of glass fiber reinforced technical thermoplastics.
Fabian Kurz, Simone Lake, Michael Stricker, Fabian Jasser
|
S03-33
Oral
|
Structure and properties of Zirconia/polymer feedstocks
Claire DELAROA, Eric LINTINGRE, Zoé BUNIAZET, René FULCHIRON, Philippe CASSAGNAU
|
Not avalaible |
S03-499
Oral
|
Micro-Assembly Injection Molding
Matthieu Fischer, Ines Kuehnert
|
S03-287
Oral
|
Influence of pigments on crystallisation, shrinkage and mechanical properties of LDPE, HDPE and PP
Jawad Ullah, Dorian Dixon, Eileen Harkin-Jones, Ciaran Magee
|
S03-28
Oral
|
A Peculiar Ear Flow in Injection Molding Simulation for Fiber Composites
Huan-Chang Tseng
|
Not avalaible |
S03-189
Oral
|
Comparison of Inline Injection Molding Compounding (IIMC) with the conventional twin-screw process using powdered flame retardants in polypropylene
Elmar Moritzer, Jannik Jilg
|
Not avalaible |
S03-139
Oral
|
Injection moulding simulations and experiments of polymer microneedle arrays
Tim Evens, Sylvie Castagne, David Seveno, Albert Van Bael
|
Not avalaible |
S03-119
Oral
|
Prediction of the mechanical properties of weld Lines in injection-molded short fiber-reinforced PBT
Gilles REGNIER, Mohamed Besher BARADI, Camilo CRUZ
|
Not avalaible |
S03-105
Oral
|
Automatically detecting and classifying faults during rubber injection molding by Fischer Discriminant Analysis (FDA)
Thomas Hutterer, Gerald R Berger-Weber, Walter Friesenbichler
|
Not avalaible |
S03-834
Oral
|
Influence of push-pull injection molding on weldlines appearance of metallized polypropylene
Giovanni Lucchetta, Andrea Scantamburlo, Marco Sorgato
|
Not avalaible |
S03-810
Oral
|
Improved Heat Transfer for fluid-based dynamic temperature controlled injection molds
Fabian Jasser, Michael Stricker, Simone Lake, Fabian Kurz
|
S03-801
Oral
|
Dependence of the nano structure size on joining strength and polymer infiltration in injection molded direct joining
Hao Chang, Fuminobu Kimura, Weiyan Chen, Shotaro Kadoya, Yusuke Kajihara
|
Not avalaible |
S03-790
Oral
|
Controlling temperature distribution of injection mold for metal-polymer direct joining
Fuminobu Kimura, Yusuke Kajihara
|
Not avalaible |
S03-776
Oral
|
Modeling the replication of laser ablated textures by micro injection molding
Leonardo Piccolo, Kyle Puleo, Marco Sorgato, Giovanni Lucchetta, Davide Masato
|
Not avalaible |
S03-331
Oral
|
In-Line Integration of 3D Printed Electronics in Plastic Parts by Injection Molding
Joshua Krantz, Dario Loaldi, Leonardo Piccolo, Corey Shemelya, Guido Tosello, Davide Masato
|
Not avalaible |
S03-756
Oral
|
Research on the direct injection molding technology of Fiber Reinforced Thermo Plastic composite material
TATSUYA TANAKA, MASAHIRO SASADA, TAKUTO NAKATA
|
Not avalaible |
S03-702
Oral
|
inline evaluation of the production quality of plastic components in the injection molding process using machine learning methods.
Michael Werner, Thomas Seul
|
S03-694
Oral
|
Investigation into the selective adjustment of the morphology of semi-crystalline plastics in the injection molding process
Johannes Ullrich, Thomas Seul, Jean Pierre Bergmann
|
S03-712
Oral
|
Interest of an annular geometry compared to cylindrical one in the thermo-rheological analysis of a polymer flow
Qiao LIN, Nadine ALLANIC, Rémi DETERRE, Pierre MOUSSEAU, Yves BEREAUX, Manuel GIRAULT
|
S03-734
Oral
|
In-process visualization of kinetic and thermal behavior of high thermal conductivity PPS
Akifumi Kurita, Yohei Yoshimura, Makoto Suzuki, Hidetoshi Yokoi, Kajihara Yusuke
|
S03-746
Oral
|
Optimization of the inline finite-difference temperature prediction for a highly segmented injection mold tempering
Christian Hopmann, Cemi Emre Kahve, Jan Fellerhoff
|
S03-64
Oral
|
Learning quality characteristics for injection molding processes using a combination of simulated and measured data
Julia Volke, Felix Finkeldey, Jan-Christoph Zarges, Petra Wiederkehr, Hans-Peter Heim
|
Not avalaible |
S03-635
Oral
|
Microstructured surfaces replication with injection molding process
Antonio José Pontes, Cintia S Martins, Angela R Rodrigues
|
Not avalaible |
S03-701
Oral
|
Process-reliable Injection Molding of Highly Filled Wood Plastic Composites (WPC)
Felix Flachmann, Elmar Moritzer
|
S03-59
Oral
|
Fabrication of exceptional 3-level hierarchical micro-micro-nanostructured surface with superhydrophobicity via polymer molding
Khosrow Maghsoudi, Gelareh Momen, Reza Jafari
|
Not avalaible |
S03-557
Oral
|
Ultrasonic-based Inline Monitoring of the Injection Moulding Process
Klaus Straka, Thomas Mitterlehner, Lukas Hofmair, Bernhard Praher
|
Not avalaible |
S03-555
Oral
|
Improvement of weld lines appearance and strength by means of push-pull and rapid heat cycle injection molding
Andrea Scantamburlo, Marco Sorgato, Filippo Zanini, Giovanni Lucchetta
|
Not avalaible |
S03-542
Oral
|
Rheometric data of thermoplastic elastomers for injection molding
Markus Kämpfe, Matthieu Fischer, Sven Wießner, Ines Kuehnert
|
Not avalaible |
S03-762
Oral
|
Effects of hot water treatment condition on injection molded direct joining of high-strength galvanized steel
Weiyan Chen, Fuminobu Kimura, Yusuke Kajihara
|
Not avalaible |
S03-772
Oral
|
Visualization Analysis of Plastication Process under High Screw Rotation Speed
Michihiro Tatsuno, Hidetoshi Yokoi
|
Not avalaible |
S03-531
Oral
|
Wear Phenomenon in Injection Molding
David Zidar, Walter Friesenbichler, Andreas Blutmager
|
S03-595
Oral
|
Improving Fiber Orientation Predictions for Injection Molded Thermoplastics
Kennedy Boyce, Donald Baird
|
Not avalaible |
S03-65
Poster
|
Correction of machine difference in an injection molding machine using in-mold sensors
Ryotaro Shimada, Satoshi Arai, Ukyo Ikeda
|
Not avalaible |
S03-798
Poster
|
UV degradation of polypropylene random copolymer: effect of carbon black and HALS
Rohollah Shamizade, Gholamreza Pircheraghi, Alireza Sahaf Amin
|
Not avalaible |
S03-180
Poster
|
Crystallization and microstructure evolution of isotactic polypropylene/poly(ethylene terephthalate) polymer blends in microinjection molding
zhongguo zhao, juqiao su, taotao ai, lei fu
|
Not avalaible |
S03-184
Poster
|
Modeling of Injection Molding Process with Applying Machine Response Input and Screw Movement Simulation
You-Sheng Zhou, Cheng-Ting Yu, Chuan-Wei Chang, Chih-Chung Hsu
|
Not avalaible |
S03-517
Poster
|
Tiger-striped Flow Mark with Same Phase Pattern Appeared in Injection Moldings of Polypropylene/Talc Compounds
Shuichi Maeda
|
Not avalaible |
S03-672
Poster
|
study of injection parameters for wood fiber composites
Agbelenko Koffi
|
Not avalaible |
S03-521
Poster
|
Advances of micro injection molding technology based on ultrasonic plasticization concept
Yuanbao Qiang, Jin Lu, Wangqing Wu, Bingyan Jiang
|
Not avalaible |
S03-566
Poster
|
Process Induced Skin-Core Morphology in Injection Molded Polyamide 66
Yvonne Spoerer, René Androsch, Dieter Jehnichen, Ines Kuehnert
|
Not avalaible |
S03-561
Poster
|
Micro-Injection Molding: Morphology Analysis and Process Simulation
Matthieu Fischer, Ines Kuehnert
|
Not avalaible |
S03-538
Poster
|
Effect of Molding Conditions on Joining Strength of Injection Molded Parts Joined with Metal and Resin
Masahiro Seto, Hiroaki Tanaka, Masashi Yamabe
|
Not avalaible |
S03-100
Poster
|
Template-assisted Micro-nano structure control over water wetting performance on PVDF surface
Bowen Deng, Bo Yin
|
Not avalaible |
S03-267
Poster
|
Rapid Crystallization of Bisphenol A Polycarbonate Induced Synergistically by Pressure and Flow
xixi Zhang, Zhongming Li
|
Not avalaible |
PPS CONFERENCES PROCEEDINGS