Name of Symposia: S03 - Processing Methodologies |
S03-93 Keynote
|
Plenary Abstract - Vortical Fountain Flows in Single Screw Extrusion David Kazmer
|
Not avalaible |
S03-206 Oral
|
Effect of laser-induced periodic surface structures on thickness reduction in thin-wall injection molding Davide Masato, Marco Sorgato, Giovanni Lucchetta
|
Not avalaible |
S03-114 Oral
|
Influence of Employing Gas Counter Pressure on Conventional and Metal-Powder Injection Molding Shia-Chung Chen, Yung Hsiang Chang, Nien-Tien Cheng, Jen-An Chang, Cheng-Chang Hsieh
|
Not avalaible |
S03-117 Oral
|
Melting of Heterogeneous Polymer Bulk Solids Christian Kneidinger, Gernot Zitzenbacher, Manuel Laengauer, Christoph Bruckbauer, Juergen Miethlinger
|
Not avalaible |
S03-124 Oral
|
RTM Process Monitoring with Embedded Sensors Andreas Damm, Karim Bahroun, Peter Middendorf
|
Not avalaible |
S03-128 Oral
|
Revealing the Polymorphic Structures of Isotactic Polypropylene in Polypropylene/Carbon Fiber Composites Jing Zhao, Ke Wang, Qiang Fu
|
Not avalaible |
S03-145 Oral
|
Numerical Investigation on thermal, flow effects and crystallinity evolution during the micro injection molding of polymers Anass BENAYAD, Rabiee EL OTMANI, Mhamed BOUTAOUS, Abdelhadi EL HAKIMI, Abdelhamid TOUACHE, Musa KAMAL
|
Not avalaible |
S03-157 Oral
|
Replication of microstructured surfaces by polymer molding techniques Antonio J. Pontes, Angela Rodrigues, Joao Pereira, Rosana Dias, João Gaspar
|
Not avalaible |
S03-110 Oral
|
Comparing Processes for the Production of Hollow Parts JOHN VLACHOPOULOS
|
Not avalaible |
S03-204 Oral
|
Optimum Screw and Process Designs for Twin Screw Extruders for PLA Formulations Charles Martin
|
Not avalaible |
S03-95 Oral
|
Evaluating the Energy Consumption of High Speed Multi Screw Extruders Mansour M Albareeki, Javier Vera-Sorroche, Carol F Barry
|
Not avalaible |
S03-21 Oral
|
Orientation of polymer films to improve dielectric properties for capacitor applications. Megan Forshey, Miko Cakmak
|
Not avalaible |
S03-59 Oral
|
A new laboratory method for solid-state biaxial stretching of polymeric materials Theo Tervoort, Gagik Ghazaryan, Raphael Schaller
|
Not avalaible |
S03-60 Oral
|
Influence of Composition, Uni and Biaxial Stretching on the Evolution of Structure and Dielectric Properties of PEI/PBT Blends ZEYNEP MUTLU, CARLOS SERRATOS, MIKO CAKMAK
|
Not avalaible |
S03-61 Oral
|
Processing and Characterization of Polymer-Metal-Hybrids Ines Kuehnert, Michaela Gedan-Smolka, Matthieu Fischer, Peter Scholz, Dirk Landgrebe, Didier Garray
|
Not avalaible |
S03-72 Oral
|
A comparison between physical and mechanical properties of rotomolded and compression molded biocomposites based on polylactic acid and agave fibers Erick Omar Cisneros-López, Aida Alejandra Pérez-Fonseca, Yolanda González-García, Daniel Eden Ramírez-Arreola, Rubén González-Núñez, Denis Rodrigue, Jorge Ramón Robledo-Ortíz
|
Not avalaible |
S03-76 Oral
|
Effect of injection molding process using induction heating on mechanical properties of long glass fiber reinforced phenolic resin Ken Fujisaki, Tatsuya Tanaka, So Shimokusuzono, Takayuki Matsumura, Masatoshi Nakajima, Takao Maenaka, Akira Inoue, Masanori Okazaki
|
S03-78 Oral
|
Strategies to incorporate new sensors and 'big data' to improve quality monitoring and process understanding Felipe P C Gomes, Michael R Thompson
|
Not avalaible |
S03-33 Poster
|
Hierarchical porous monoliths of stereocomplexed polylactide Xiaorong Sun, Wei Yang, Ruiying Bao
|
Not avalaible |
S03-143 Poster
|
Process-induced Morphology in Injection Molded Interfaces for PA 6.6 Yvonne Spoerer, Martin Zimmermann, Ines Kuehnert
|
Not avalaible |
S03-139 Poster
|
Tiger-striped Flow Mark of Polypropylene/Rubber/Talc Alloys Shuichi Maeda
|
Not avalaible |
S03-75 Poster
|
Highly anisotropic functional conductors fabricated by an innovative and brief approach: a pivotal role of multiple melt flow in coordination with confined interface in multi-melt multi-injection molding (M3IM) Yanhao Huang, Zhengying Liu, Mingbo Yang
|
Not avalaible |
S03-12 Poster
|
A novel method for fabrication of PP/HDPE/PP trilayer microporous membrane with a highly orientated structure Mingbo Yang, Wenbo Chen
|
Not avalaible |
S03-190 Poster
|
A study on Wood film Insert Thermoforming and Injection molding for a Plastic Part with Aesthetic Appearance Yeong-Eun Yoo, Jin-Hwan Kim, Sang-Won Woo
|
Not avalaible |