OLD CONFERENCES
|
Name of Symposia: S10 - Simulation and Design |
S10-140 Oral
|
Capillary Flow Behavior of a Rubber Compound Evan Mitsoulis, Andreas Neunhaeuserer, Sebastian Stieger, Walter Friesenbichler
|
Not avalaible |
S10-57 Oral
|
Micro Injection Molding – Process Simulation and Morphology Development Matthieu Fischer, Pascal Poehlmann, Ines Kuehnert
|
Not avalaible |
S10-8 Oral
|
Mixing Evaluation by Entropic and Geometric Measures Miron Kaufman, Petru S. Fodor, Robert White, Joshua Clark
|
Not avalaible |
S10-119 Oral
|
Moisture Absorption in Thermosetting Polymers and Composites: A Comprehensive Model and Experimental Observations Gorkem Guloglu, Cengiz Altan
|
S10-126 Oral
|
A New Approach to Apply High Consolidation Pressure in Composite Manufacturing by Using Neodymium Iron Boron Magnets Mehrad Amirkhosravi, Maya Pishvar, M. Cengiz Altan
|
S10-47 Oral
|
Molecular Dynamics(MD) simulation of an epoxy-water system: relating damage to dielectric behavior Rishabh Debraj Guha, Ogheneovo Idolor, Landon Grace
|
Not avalaible |
S10-163 Oral
|
Virtual optimization and experimental validation of an additive manufactured injection mold for a sensor housing Gerald R Berger, Peter Buertlmair, Gerhard Panzl, David Zorn, Walter Friesenbichler
|
Not avalaible |
S10-179 Oral
|
The influence of the rib thickness on the strength of ribs in injection moulded short fibre reinforced products: experiments versus numerical simulations Cédric De Schryver, Tim Evens, Steven Koen Latré, Bart Buffel, Jozefien De Keyzer, Albert Van Bael, Frederik Desplentere
|
S10-181 Oral
|
Optimization of a co-extrusion die for the production of coaxial 3D printer filaments Shihang Wang, Javier Vera Sorroche
|
Not avalaible |
S10-205 Oral
|
Investigation of the In-flow Effect on Weld Lines Strength in Injection Molding of Polypropylene Compounds Marco Sorgato, Andrea Scantamburlo, Giovanni Lucchetta
|
Not avalaible |
S10-212 Oral
|
Characterization of Freeze-Thaw Cycling Induced Damage in Aircraft Composites using Dielectric Properties Matthew Urrea, Ogheneovo Idolor, Landon Grace
|
Not avalaible |
S10-40 Oral
|
Heat Transfer Simulation of The Heat-Sealing Process in Multilayer Films Zahra Kanani Aghkand, Ebrahim Jalali dil, Abdellah Ajji, Charles Dubois
|
Not avalaible |
S10-48 Poster
|
Study of Moisture Sorption and Desorption in Polymer Materials for Automotive Exterior Lamp Sun Kyoung Jeoung, Bo-Ram Kim, Youn Ki Ko, Jun Uk Ha, Ya Won Kim, Seung Yeon Lee, Jongsu Kim, Jung Hwan Lee, Pyoung-Chan Lee
|
Not avalaible |
S10-103 Poster
|
Fatigue analysis on injection mold with conformal cooling channel produced by additive manufacturing Seok-Kwan Hong, Sung-gyu Kim, Jungeon Son, Jinsoo Kim, Miae Kim, Jeongjin Kang, Sangyoon Kim, Young-keun Kim, Bohye Chae, Taekyong Hwang
|
Not avalaible |
S10-142 Poster
|
Study on Thermo-structural Analysis of PPS based Reflector Housing in an Automotive Head Lamp module Youn Ki Ko, Pyoung-Chan Lee, Sun Kyoung Jeoung, Bo-Ram Kim, Ya Won Kim, Seung Yeon Lee, Jongsu Kim, Jung Hwan Lee, Jae Uk Jung, Ki Hwan Choi
|
Not avalaible |
S10-58 Reject
|
xxxxxxxxxxxxxxxxxxxxxxxxx Reinhard Heinrich Fechter
|
Not avalaible |
|