Name of Symposia: Inj - Injection Molding & Molds |
Inj-233 Keynote
|
Advances in high precision micromoulding Phil Coates, Ben Whiteside, Max Babenko, Cristina Tuinea-Bobe, Karthik Nair
|
Inj-53 Keynote
|
New In-line Measurements for an Evaluation of Process Aids in the Injection Molding Process Tristan Koslowski, Christian Bonten
|
Inj-414 Keynote
|
Innovative process technology for endless fiber reinforced thermoplastic composites with integrated functionalities by injection molding Mathias Muehlbacher, Volker Altstaedt
|
Not avalaible |
Inj-215 Keynote
|
First integrated human like machine vision system for the surface inspection of curved injection molded parts Dieter P. Gruber, Walter Friesenbichler
|
Inj-149 Oral
|
Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters Thomas Lucyshyn, Martin Burgsteiner, Georg Graninger, Clemens Holzer
|
Inj-226 Oral
|
Quantification of the Visual Perceptibility of Defects on Transparent Injection-Molding Parts with Scattering Substructures Matthias Haselmann, Robert Hinterberger, Dieter Paul Gruber
|
Inj-220 Oral
|
Energy Efficiency in Injection Molding Matthias Duengen, Michael Koch
|
Not avalaible |
Inj-218 Oral
|
Influence of Flow Behavior of Different Matrix Materials on the Orientation of Anisotropic Magnetic Particles during Injection Molding Torsten Maenz, Gerrit Hülder, Michael Gehde
|
Inj-197 Oral
|
Development of Mold for Measuring Perpendicular Demolding Resistance to Transcribed Surface Using Prevention Mechanism of Mold Bending Deformation and Evaluation of Factors Influencing Demolding Resistance Hidetoshi Yokoi, Taito Ueda
|
Inj-189 Oral
|
The Rapid Heat Cycle Molding Influence on Fibers Orientation and Mechanical Properties in Injection Molding of Fiber Reinforced Polypropylene Luca Crema, Giovanni Lucchetta, Filippo Zanini, Simone Carmignato
|
Inj-170 Oral
|
Investigation of the influence of vacuum venting on mould surface temperature in micro injection moulding Marco Sorgato, Maximilian Babenko, Giovanni Lucchetta, Ben Richard Whiteside
|
Inj-235 Oral
|
Flow-induced Crystallization of a Long Chain Aliphatic Polyamide in Micro-Injection Moulding: Phil Coates, Ben Whiteside, Cristina Tuinea-Bobe, Yunyun Gao, Xia Dong, Lili Wang, Guoming Liu, Dujin Wang
|
Inj-15 Oral
|
Time, the crucial factor in injection molding Timo Gebauer
|
Not avalaible |
Inj-260 Oral
|
Analysis of the replication of high aspect ratio micro-structured surfaces by injection-compression molding Davide Masato, Marco Sorgato, Giovanni Lucchetta
|
Inj-147 Oral
|
Process Parameters Affecting the bonding of In-Mold Decoration of Injection Molded Components Felix Woyan, Michael Koch
|
Inj-146 Oral
|
Investigating the wet moulding process of cfrp sandwich components Jan Schuette, Elisabeth Ladstätter
|
Inj-136 Oral
|
Determination of a robust process for a union nut. Why d-optimal DoE did not solve random impact behavior? Clemens Steffel, Gerald R. Berger, Walter Friesenbichler
|
Inj-128 Oral
|
On the use of interfacial tension parameter to predict reduction of friction by mold coatings in injection molding of Polyamide 6 Gerald R. Berger, Clemens Steffel, Walter Friesenbichler
|
Inj-124 Oral
|
Influence of Rapid Heat Cycle Molding and Filler Type on Part Warpage of PP-based compounds Gernot Alois Pacher, Gerald Roman Berger, Dieter Paul Gruber, Walter Friesenbichler
|
Inj-120 Oral
|
Advanced mold concepts to improve part quality and productivity in rubber injection molding Michael Fasching, Walter Friesenbichler, Gernot Alois Pacher, Gerald Roman Berger
|
Inj-161 Oral
|
Back injection moulding of FR4 with heat conductive polymers Sandra Balzereit, Volker Altstädt
|
Inj-336 Oral
|
Visualization of Flow Patterns and Dead Volume by Means of Various Die Geometries Based on Different Rubber Compounds Roman Christopher Kerschbaumer, Bernhard Lechner, Leonhard Perko, Walter Friesenbichler
|
Inj-82 Oral
|
Ejection Forces in Deep Tubular Moldings: Theoretical and Experimental Approach Antonio J. Pontes
|
Inj-449 Oral
|
On The Optimisation of Mechanical Properties of PP Moulded Parts Marton Huszar, Fawzi Belblidia, Patrick Wlodarski, Cris Arnold, Johann Sienz, David Bould
|
Inj-434 Oral
|
Micro-structured protective coatings for polymer processing tools by means of electrodeposition combined with CVD perfluorinated monolayers Stefan Waschke, C. Karl, G. Grundmeier
|
Inj-411 Oral
|
Molecular coating of molds and dies for polymer processing Baris Kaynak, Stefan Waschke, Guido Grundmeier, Wolfgang Kern
|
Inj-393 Oral
|
Influence of molding conditions on the shrinkage and warpage behaviour of standardized test specimens Dragan Kusić, Aleš Hančič
|
Inj-241 Oral
|
Effect of fibre concentration on the fibre orientation in film gated injection molded plaques Jens Kjær Jørgensen, Dietmar Salaberger
|
Inj-34 Oral
|
Foam Injection Molding 2.0 Wolfgang Roth
|
Not avalaible |
Inj-257 Oral
|
Tensile Deformation of Micromoulded Oriented Poly(ε-caprolactone) and Its Miscible Blends with Poly(vinyl methyl ether) Phil Coates, Ben Whiteside, Zhiyong Jiang, Yaotao Wang, Lianlian Fu, Yongfeng Men
|
Inj-332 Oral
|
Morphology formation in weldlines during injection molding Ines Kuehnert, Matthieu Fischer, Martin Zimmermann
|
Inj-308 Oral
|
Validation of precision powder injection molding process simulations using a spiral test geometry Maximilian Marhöfer, Guido Tosello, Aminul Islam, Hans Nørgaard Hansen, Volker Piotter, Tobias Müller
|
Inj-292 Oral
|
Fast temperature evolution on the mold surface: analysis and simulation Sara Liparoti, Vito Speranza, Roberto Pantani, Giuseppe Titomanlio
|
Inj-285 Oral
|
Analysis of factors affecting the demolding of micro-structured devices in the injection molding process Barbara Strohmayer, Tobias Struklec, Thomas Lucyshyn, Clemens Holzer
|
Inj-283 Oral
|
A comparison of the processing environment and product quality for both conventional and ultrasonic micromoulding techniques Max Babenko, Ben Whiteside, Phil Coates
|
Not avalaible |
Inj-266 Oral
|
Injection Molding Microstructured Substrates from Rubber-Containing Polymers Marisely De Jesus Vega, Joey Mead, Carol Barry
|
Inj-88 Oral
|
INFLUENCE OF PROCESSING ON THE FIBER LENGTH DEGRADATION IN FIBER REINFORCED PLASTIC PARTS Fabian Willems, Christian Bonten
|
Inj-361 Poster
|
A Study on the Evaluation of Bonding Characteristics for LSR/PBT Two-component Injection Molding Product Yong Jun Jeon, Jeong Won Lee, Min Jae Song, Hyung Pil Park, Baeg Soon Cha
|
Not avalaible |
Inj-405 Poster
|
Viscoplastic FEA of Injection Blow Molding Process for the Thick-Walled PET Bottles Min-Jae Song, Baeg-Soon Cha
|
Not avalaible |
Inj-48 Poster
|
Characterization of UV-Cured Passivation Polymers Sarah Schiller, Andreas Behrendt, Mathias Plappert, Franz Stelzer, Frank Wiesbrock
|
Inj-102 Poster
|
Experimental Analysis on the Generation Process of Tree-ring-like Whitening Defects in Injection Molding Norimichi Masuda, Hidetoshi Yokoi
|
Inj-360 Poster
|
Minimization of Warpage for Injection Moulded Parts with Reversed Thermal Mould Design Mathias Weber, Christian Hopmann, Maximilian Schöngart, Philipp Nikoleizig, Christian Windeck
|