Name of Symposia: Rec - Recycling |
Rec-435 Keynote
|
Challenges in the mechanical recycling of post-consumer solid plastic waste Kim Ragaert, Ludwig Cardon
|
Rec-284 Keynote
|
Rec2TecPart - A New Process For Technical Components Based On Recyclates Matthias Katschnig, Clemens Holzer, Bianca Purgleitner, Birgit Hornitschek, Andreas Hoellebauer, Jürgen Link, Ewald Offenberger, Peter Hierzenberger, Klaus Brzezowsky, Christian Wind
|
Rec-72 Oral
|
Recycling of Cast Polyamide Waste on a Twin-Screw Extruder Benjamino Rocco Formisano, Svenja Göttermann, Christian Bonten
|
Rec-46 Oral
|
Environmental and economic life cycle analysis of plastic waste management options: a review Carlos A. Bernardo, Carla L. Simões, Lígia M. Costa Pinto
|
Rec-130 Oral
|
Design of stimuli triggered smart composite materials with enhanced recyclability and selfhealing properties Simone Viola Radl, Thomas Griesser, Manuel Kreimer, Andreas Oesterreicher, Wolfgang Kern, Sandra Schlögl
|
Rec-438 Oral
|
Blending of recycled mixed polyolefins with recycled polypropylene: effect on physical and mechanical properties Sara Hubo, Laurens Delva, Nicolas Van Damme, Kim Ragaert
|
Rec-386 Oral
|
Prediction of the Properties of Recycled Thermoplastics Achim Schmiemann
|
Rec-376 Oral
|
Kinetics of the catalytic conversion of mixed polyethylene and polypropylene into middle distillates Seyed Alireza Sakaki, Behrooz Roozbehani, Mohammadreza Shishesaz, Nasrin Abdollahkhani, Shahrokh Hamedifar
|
Not avalaible |
Rec-83 Oral
|
Recycling and Exposure Profiles of Carbon Nanotube Filled Polymers Joey Mead, Jinde Zhang, Artee Panwar, Pongsit Boonruksa, Dhimiter Bello, Tim Jozokos, Jacqueline Isaacs, Carol Barry
|
Rec-152 Oral
|
The effect of extrusion reprocessing on the properties of montmorillonite filled polypropylene Laurens Delva, Kim Ragaert, Joris Degrieck, Ludwig Cardon
|
Rec-198 Oral
|
Injection Molding System for Recycled Plastic Flakes from Used Home Appliances Yasuhiro Endo, Yoshihiro Takai, Yuichi Matsuo
|
Rec-221 Oral
|
THE INFLUENCE OF BIOPLASTICS ON THE PROPERTIES OF REPROCESSED LDPE Blanca Maria Lekube, Christoph Burgstaller
|
Rec-201 Oral
|
Chemical modification of Polypropylene post-consumer-waste by reactive extrusion as an innovative upcycling process Florian Kamleitner, Bernadette Duscher, Thomas Koch, Simone Knaus, Vasiliki-Maria Archodoulaki
|
Rec-339 Poster
|
Next Generation of Plastics in a Circular Economy Michael Heinzlreiter
|
Not avalaible |
Rec-209 Poster
|
Evaluation of stabilizer and additive content of post-consumer-polypropylene waste and their influence on new concepts of polypropylene-upcycling Bernadette Duscher, Florian Kamleitner, Thomas Koch, Vasiliki-Maria Archodoulaki
|
Rec-103 Poster
|
Influence of Nut Shell Powder Content on the Tribological Properties of Recycled Polyolefin Composites Kazuma Mikawa, Akinori Hoshikawa, Yosuke Nishitani, Tsubasa Shimizu, Eiichi Takahashi, Takeshi Kitano
|
Rec-330 Poster
|
Influence of reprocessing on the mechanical properties of polyamide 6 containing talc Adriana Martinelli Catelli Souza, Gustavo Domingo
|
Rec-452 Poster
|
Morphological and Mechanical Properties of Injection Molded Recycled Poly(ethylene terephthalate) Samples Bela Molnar, Ferenc Ronkay
|
Rec-322 Poster
|
Examination of parameters of the shredding process and the properties of recyclate Karolina Głogowska, Jakub Rozpędowski
|