PPS Conferences Proceedings
       
Home > PPS2015 (2015) > Mod - Modeling & Simulation
Name of Symposia: Mod - Modeling & Simulation
Mod-77
Keynote
Some Experiences on Extrudate Swell with the K-BKZ Model
Evan Mitsoulis
Mod-427
Keynote
Modelling and Instrumentation of the Stretch Blow Moulding Process
Gary Menary
Mod-416
Keynote
Current developments in extrusion simulation
Volker Schöppner, Philipp Kloke, Johann Sebastian Leßmann, Tobias Herken, Kim Scharr
Mod-340
Oral
Investigation of the influencing factors on the process-dependent elasticity modulus in extrusion blow moulded plastic containers for material modelling in the finite element simulation
Dirk Grommes, Olaf Bruch, Johannes Geilen
Mod-227
Oral
Shape and stress development in cooling air ring and free surface from non-isothermal film blowing simulations
Jaap den Doelder, Tatyana Leonova, Stef van Eijndhoven
Mod-240
Oral
Fluid Infiltration of a Permeable Substrate Moving Past a Solid Cylinder
Nickolas D Polychronopoulos, Thanasis D Papathanasiou
Mod-252
Oral
Material modelling of PPA-CF30 with fiber data from µCT and injection moulding simulation
Christian Johann Bodor, Daniel Tscharnuter, Walter Friesenbichler
Mod-256
Oral
Dissipative Particle Dynamics Simulations of Orientation of Layered Silicate Particles Embedded in Polymer Melts under Shear Flows
Ali Gooneie, Stephan Schuschnigg, Clemens Holzer
Mod-262
Oral
MODELLING OF LONGITUDINAL AND TRANSVERSAL MIXING FOR THE SINGLE SCREW PLASTICATING EXTRUDER (SSE)
Christoph Kneidinger
Mod-288
Oral
Modelling of processing of oriented polymers
Paul Spencer, Dimitrios Vgenopoulos, Fin Caton-Rose, John Sweeney, Phil Coates
Mod-303
Oral
Oil Diffusion Properties of Acoustic Foams for Oil Contaminated Water Treatment
Pavani Cherukupally, R.K.M. Chu, Amy M. Bilton, Chul B. Park
Mod-213
Oral
Determination of Young’s modulus through Virtual fields Method on PET (Polyethylene Terephthalate) container from Stretch Blow Moulding
Narendran Anumula, Gary Menary
Not avalaible
Mod-90
Oral
Three-dimensional Simulation of a Single Screw Extruder’s Grooved Feed Section
Oguz Celik, Christian Bonten
Mod-317
Oral
Thermoforming of polymer laminate films: Thermo-viscoelastic characterization and modeling
Daniel Tscharnuter, Eliza Truszkiewicz, Gerald Pilz, Gerald Pinter
Mod-225
Oral
Failure models for thermoplastics in LSDYNA
Peter Reithofer, Artur Fertschej
Mod-338
Oral
Concept of Fatigue Design Methodology for short fibre reinforced Polymers considering Environmental Conditions
Andreas Primetzhofer, Andreas Mösenbacher, Tim Haslinger, Gerald Pinter
Mod-304
Oral
Modeling the Processing Window in Vertical Form Fill Seal Packaging Machine and Drop Test Simulations for Pouches
Selim Bensason, Peter Sandkuehler, Jef Van Dun, Colmar Wocke, Prashant Shembekar
Mod-211
Oral
Characteristics of the mold filling simulation for a variothermal injection molding process with highly filled thermoplastics
Antje Birkholz, Johannes Wortberg
Mod-399
Oral
Estimation of the Lifetime of Short Fiber Reinforced Plastic Parts in Steering Systems
Fabian Ferrano, Andreas Lipka, Michael Stanko, Markus Stommel
Mod-425
Oral
Analysis for microstructure of microcantilevers arrays on micro-injection moulding by numerical simulation
Reza Gheisari, Paulo Jorge Bártolo, Nicholas Goddard
Mod-44
Oral
MATERIAL CHARACTERIZATION FOR THERMOFORMING-SIMULATION
Kai Landsecker, Christian Bonten
Mod-204
Oral
Optimization of the long term performance of pipes by multilayer build ups
Florian Arbeiter, Martin Ševčík, Pavel Hutař, Michael Feuchter, Katharina Bruckmoser, Gerald Pinter
Mod-19
Oral
Threedimensional Characterization of Dispersive Mixing in Single Screw Extruders
Thomas Erb, Oguz Celik, Christian Bonten
Mod-5
Oral
Integrative Simulation of Short Fiber Reinforced Thermoplastic Components
Armin Kech, Jan-Martin Kaiser
Mod-133
Oral
Effects of Geometry Variations on the Mixing Ability of a Shear-Mixing-Type Screw Head
Klaus Straka, Georg Steinbichler, Gregor Stadler
Mod-109
Oral
Melting rate of a single screw extruder with a grooved melting zone
José Antonio Avila Alfaro, Christian Bonten
Mod-334
Oral
The Potential of SPH for the Simulation of Fully and Partially Filled Co-Rotating Twin-Screw Extruder Elements
Josip Matić, Andreas Eitzlmayr, István Kondor, Gerold Koscher, Johannes Khinast
Mod-212
Poster
Dynamic material characterization using 4a impetus
Peter Reithofer, Artur Fertschej, Bernhard Jilka
Mod-108
Poster
A new analytical material model for the coefficient of thermal expansion for semi crystalline polymers.
Esther van Dorp, Johannes Steinhaus, Dirk Reith, Olaf Bruch, Berenika Hausnerova, Bernhard Moeginger
Not avalaible
Mod-306
Poster
Micromechanical Modeling and Experimental Investigation of the Fiber-Matrix Interphase in Applied Short Glass Fiber Composites
Marc Schöneich, Markus Stommel
Not avalaible
Mod-358
Poster
Examination of the weld line strength of stagnating and flowing weld lines in unreinforced thermoplastics
Maximilian Schöngart, Christian Hopmann, Jiuheng Chen, Jakob Onken
Mod-456
Poster
Processing of Multilayer Propellants Through Concentric Extrusion Dies
Simon Durand, Charles Dubois, Pierre G. Lafleur
Mod-458
Poster
The Use of a Direct Particle Simulation to Predict Fiber Motion in Processing of Long Fiber-Reinforced Thermoplastics
S. Goris, C. Perez, Tim Osswald
Mod-50
Poster
THERMOFORMING: SIMULATION OF HEAT FLOW DISTRIBUTION FOR COMPUTING THE HEATING STAGE
Benjamin Neubig
Mod-76
Poster
Multimode Mesoscopic Rheological Model for Polymer Melts and Flow in a Plane-parallel Channel with a Sudden Convergence
Grigori Pyshnograi, Ivan Pyshnograi, Konstantin Koshelev, Darina Merzlikina, Mikhail Tolstykh
Mod-305
Poster
CHARACTERIZATION OF HDPE-WOOD COMPOSITE PROPERTIES FOR THERMOFORMING APPLICATIONS
Fouad Erchiqui
Not avalaible