PPS Conferences Proceedings
       
Home > PPS2015 (2015) > Rhe - Rheology & Advanced Characterization
Name of Symposia: Rhe - Rheology & Advanced Characterization
Rhe-307
Keynote
A small-scale experimental set-up for processing-related materials characterization
Paulo F Teixeira, Loic Hilliou, Jose A. Covas
Not avalaible
Rhe-151
Keynote
Control shear stress method to measure yield stress of highly filled polymer melts
Christian Kukla, Ivica Duretek, Clemens Holzer
Rhe-205
Keynote
The cyclic CRB Test - A quick test for assessing the long term fracture behavior of polymers
Gerald Pinter, Florian Arbeiter, Michael Berer, Bernd Schrittesser, Andreas Frank
Rhe-281
Keynote
Rheological behavior of polymer melts in equibiaxial elongational flow
David Venerus, Rebecca Mick
Not avalaible
Rhe-408
Keynote
Static Yield Stress of a Magnetorheological Fluid Containing Pickering Emulsion Polymerized Fe2O3/Polystyrene Composite Particles
Youngwook Peter Seo, Wei Huan Chuah, Yongsok Seo
Rhe-410
Keynote
Relations between rheology and microstructure in polyolefin-based crystalline elastomers
Chiara Santillo, Amodio Piscitelli, Rossana Pasquino, Rocco De Girolamo, Finizia Auriemma, Claudio De Rosa, Nino Grizzuti
Rhe-417
Keynote
Elongational rheology and its role for polymer processing
Helmut Münstedt
Rhe-23
Oral
Wall slippage of PLA and PVC
Sylvia Apostol, Juergen Miethlinger, Veronika Putz
Rhe-311
Oral
Advanced methods for discovering PV module process optimization potentials
Gernot Oreski, Gerald Pinter
Rhe-89
Oral
Enhancement in Oil recovery by changing in the Rhelogical properties of Smart Hydrogel
majid shahkaram oghli, farhad shahsavan, zahra hajiloo
Rhe-74
Oral
Shrinkage in Relation to the TTT-Features of an Epoxy Adhesive
Paul Ludwig Geiss, Anita Hohn, Melanie Schumann, Lukas Götz
Rhe-112
Oral
MEDIA INFLUENCE ON THE FRACTURE MECHANICAL BEHAVIOR OF POLYAMIDE
Johannes Heyn
Rhe-54
Oral
Effects of Variation in Strain Measurements with the Extended Dynamic Range (EDR) of the RPA on the Accuracy of Shear Thinning Measurements for Rubber Compounds
John S. Dick, Edward Norton, Tianxiang Xue
Rhe-144
Oral
Comparison of measurement techniques for shear viscosity of non compatibilised immiscible blends
Frederik Desplentere, Sofie Deceur
Rhe-18
Oral
Processing and characterization of injection moldable polymer-particle composites applicable in ferrite cores for bobbins
Tamara Florian, Gerhard Ziegmann
Rhe-242
Oral
Development and Implementation of an Accelerated Method for Chlorine Dioxide Exposure
Marton Bredacs, Anita Redhead, Andreas Frank, Amaia Bastero, Gerald Pinter
Rhe-328
Oral
Rheological characterization of PP - based wood plastic composite (WPC)
Valentina Mazzanti, Nadia El Kissi, Francesco Mollica
Rhe-154
Oral
Investigating effects of thymolphthalein on thermo-oxidative stability of polypropylene in melt and solid states
Reza Jahanmardi, Nikoo Karami
Not avalaible
Rhe-214
Oral
Phase separation of beam electron cross-linked thermo responsive PVME nanogels in the presence of spherical nano particles: with a view toward rheology and interactions.
Ashkan Shoja Chaykar, Fatemeh Goharpey, Jafar Khademzadeh Yeganeh, Parastoo Lotfi, Farhad Shahsavan
Rhe-207
Oral
Dynamic mechanical profile of polyketone compared to conventional technical plastics
Gerald Pilz, Peter Guttmann
Rhe-84
Oral
Effect of Nucleation on Structure Formation of Polypropylenes at Rapid Cooling
Daniela Mileva, Markus Gahleitner, Petar Doshev, Rene Androsch
Rhe-193
Oral
Preparation of thymolphthalein stearate and assessment of its effects on thermo-oxidative stability of polypropylene in melt and solid states
Reza Jahanmardi, Maliheh Saberi
Not avalaible
Rhe-16
Oral
High Pressure Capillary Rheometer, a simple way to measure viscosity?
Timo Gebauer
Not avalaible
Rhe-181
Oral
Influences of post processing changes on the fracture mechanical properties of POM
Michael Berer, Michael Feuchter, Gerald Pinter
Rhe-87
Oral
Structural evolution of a constrained epoxy functional polyethylene network crosslinked by a bio-based reactant
Ruben Dario Briceño Garcia, Philippe Cassagnau, Philippe Chaumont, Françoise Fenouillot, Laurent Keromnes, Yannick Goutille
Rhe-129
Oral
An investigation by nanoindentation, tensile testing, WAXS and DSC of the enhanced behaviour and properties of oriented PP
Dimitrios Vgenopoulos, Colin Grant, Phil Caton-Rose, John Sweeney, Phil David Coates
Rhe-440
Oral
A new crystallization process in polypropylene highly filled with calcium carbonate
Jürgen E. K. Schawe, Paul A. Vermeulen, Martin van Drongelen, Elke Hempel
Rhe-420
Oral
Melt rheology and batch foaming behavior of modified polycarbonate
Masataka Sugimoto, Toshiyuki Isogai, Sathish Sukumaran, Kiyohito Koyama
Rhe-55
Oral
Extensional Properties of Polypropylene at Capillary Extrusion with Various Die Geometries
Jiraporn Seemork, Shogo Nobukawa, Masayuki Yamaguchi
Rhe-56
Oral
Modeling the Viscosity Development of Epoxy Resins during Injection of the RTM Process
Stefan Caba, Michael Koch
Rhe-70
Oral
Influence of the surface-melt-interaction on the rheological properties of polymer melts
Michael Burgfeld, Johannes Wortberg
Not avalaible
Rhe-403
Oral
Surface Characterization of Fillers, Fibres and Polymers by iGC for Developing Composites
Anett Kondor, Daniel Burnett, Armando Garcia, Tinh Nguyen
Rhe-388
Oral
Vacuum Compression Molding as a Tool for Sample Preparation in Rotational Melt Rheology
Daniel Treffer, Alexander Troiss, Johannes Khinast
Rhe-143
Oral
Wetting Behaviour of Polymeric Materials on Coated and Uncoated Tool Steel Surfaces at Processing Temperature
Gernot Zitzenbacher, Zefeng Huang
Rhe-123
Oral
Structural analysis of elastomer and polymer materials with low field time domain solid state NMR
Santhosh Ayalur Karunakaran, Jakob Manhart, Michael Fasching, Sandra Schlögl
Rhe-315
Oral
ULTRASOUND-BASED SHEAROGRAPHY FOR DETERMING THE LDR
Nikolai Gulnizkij, Igor Solodov, Gerd Busse, Marc von Kreutzbruck
Rhe-371
Oral
Effect of the average number of branches per LDPE molecule on strain hardening in uniaxial elongational flow
Masood Khabazian Esfahani, Naddereh Golshan Ebrahimi
Not avalaible
Rhe-13
Oral
Polymer based coating analyses with diffusive wave spectroscopy
Roland Ramsch, Giovanni Brambilla, Mathias Fleury, Pascal Bru, Gérard Meunier
Rhe-93
Oral
Viscoelastic and dielectric properties of highly filled composites of poly(vinyl butyral) and aluminum oxide particles
Ulrich A. Handge, Michael F.H. Wolff, Volker Abetz, Stefan Heinrich
Rhe-347
Oral
Evaluating the efficiency of nucleation agents in polypropylene by means of isothermal crystallization and kinetic modelling
Claire Strasser, Andreas Spörrer, Tobias Pflock
Rhe-95
Oral
Advanced rheometric tools for polymer applications
Joerg Laeuger
Not avalaible
Rhe-261
Oral
The Influence of the Composite Features on the Mechanical Performance of Hybrid Thermoset Composite-Metal Friction Riveted Joints
Natascha Zocoller Borba, Lucian Blaga, Jorge dos Santos, Lernardo Bresciani Canto, Sergio Amancio-Filho
Rhe-122
Oral
Change of processing behaviour of rubber in injection moulding caused by material storage
Michael Fasching, Walter Friesenbichler, Gerald Roman Berger
Rhe-94
Poster
Polymers for printed photovoltaic thin films – crucial aspects during the embedding of inorganic particles into an organic matrix
Sandra Pötz, Parichehr Esfandiari, Christoph Waldauf, Axel Neisser, Gernot Oreski
Rhe-162
Poster
Chemical changes in polyetherimide (PEI) joined by Friction-based Injection Clinching Joining (F-ICJ) technique
Maríilia Sônego
Rhe-186
Poster
Electrochemistry Provides Better Understanding of Polymer Brushes as Smart Coatings
Guido Panzarasa, Valentina Pifferi, Katia Sparnacci, Luigi Falciola
Rhe-224
Poster
Investigation of non-cross-linked and cross-linked polyolefin using different analytic methods
Melanie Brasch, Katrin Berger, Hannelore Mattausch, Gisbert Riess, Clemens Holzer
Not avalaible
Rhe-280
Poster
Anisotropic Thermal Conduction in Polymers and its Molecular Origins
David Venerus, David Nieto Simavilla, Jay Schieber
Not avalaible
Rhe-27
Poster
Studies on tribological behaviour of PEEK and PE-UHMW
Marcela Petrica, Bernadette Duscher, Thomas Koch, Vasiliki Maria Archodoulaki
Rhe-312
Poster
EVALUATION OF THE RHEOLOGICAL PROPERTIES OF PLA COMPOSITES AND CALCIUM CARBONATE NANOPARTICLES
Janaina Fernandes Moreno, Ana Lúcia Nazareth da Silva, Antonio Henrique Monteiro da Fonseca Thomé da Silva, Ana Maria Furtado de Sousa
Not avalaible
Rhe-331
Poster
Mechanical properties of Polyamide 12 after exposed to biodiesel
Adriana Martinelli Catelli Souza, Roberto Nascimento
Rhe-335
Poster
Fretting tests for elastomeric sealing materials
Andreas Hausberger, Martin Tockner, Michael Berer, Istvan Godor, Thomas Schwarz
Rhe-349
Poster
On estimating the zero-shear-rate viscosity: Tests with PIB and PDMS
Montgomery Shaw
Rhe-370
Poster
Effect of Salt Concentration and Temperature on Rheological Properties of Guar Gum-Dead Sea Salt (GG-DSS) Gel
Oyunchimeg Zandraa, Nabanita Saha, Tomas Saha, Takeshi Kitano, Petr Saha
Rhe-375
Poster
Rheological evaluation of polymeric binders from lubricating oil and post-consumer polypropylene
LEILA YUAN VISCONTE, Ricardo da Silva Souza, Elen B.A.V. Pacheco, Valeria G. Costa
Rhe-380
Poster
Effect of Pressure on Mechanical Properties of Thermoplastic Polyurethane
Marko Bek, Joris Betjes, Nikola Holeček, Alen Oseli, Igor Emri
Rhe-381
Poster
Dynamic Bulk Compliance Measuring System for Characterization of Time-Dependant Materials
Alen Oseli, Igor Emri
Rhe-249
Poster
About the use of X-ray tomography for the characterization of fibre reinforced polymers
Dietmar Salaberger, Thomas Koch, Michael Jerabek, Johann Kastner