Name of Symposia: S13 - Injection Molding and Mold |
S13-625 Keynote
|
Predicting the fountain flow instability Tim M Smit, Martien A Hulsen, Patrick D Anderson
|
Not avalaible |
S13-448 Keynote
|
PEEK crystallisation phases analysis in microinjection moulding Cristina Luminita Tuinea-Bobe, Hesheng Xia, Yan Liu, Ben R Whiteside, Phil D Coates, Guoxia Fei
|
Not avalaible |
S13-250 Keynote
|
Design And Simulation Of Conformal Cooling Channels In SLM Produced Injection Molds: Effects On Process And Product Quality Wim Six, Raf Appermont, Frederik Desplentere, Jozefien De Keyzer, Albert Van Bael
|
S13-677 Keynote
|
Experimental Studies and Numerical Simulation of the Foam Injection Molding Process using Gas-counter Pressure Vahid Shaayegan, Chul B. Park, Franco Costa, Sejin Han
|
S13-473 Oral
|
Injection Molding of Micro and Nanostructured Surfaces From Liquid Silicone Rubber Marisely De Jesus Vega, Joey Mead, Carol Barry
|
S13-100 Oral
|
Melt Processed and Self-reinforced Ultrahigh Molecular Weight Polyethylene Used for Total Joint Replacement Yan-Fei Huang, Jia-Zhuang Xu, Zhong-Ming Li
|
S13-457 Oral
|
Effects of Fast Mold Temperature Evolution on Micro Features Replication Quality during Injection Molding Sara Liparoti, Matteo Calaon, Vito Speranza, Guido Tosello, Roberto Pantani, N. H. Hansen, Giuseppe Titomanlio
|
S13-105 Oral
|
Experimental Investigations on the Fibre Length Degradation in Injection Moulds Elmar Moritzer, Yannick Martin
|
S13-424 Oral
|
Investigation of the two-dimensional shape of caverns viewed in the context of electroplating quality demands using image analysis Jens Peter Siepmann, Johannes Wortberg, Felix Alexander Heinzler
|
Not avalaible |
S13-421 Oral
|
The Influence of the Process Parameters in Multi-Component Injection Molding on the Composite Adhesion of the Material Combination PA6 with Self-Adhesive Liquid Silicone Rubber (LSR) Michael Hartung, Hans-Peter Heim, Ralf-Urs Giesen
|
Not avalaible |
S13-248 Oral
|
Effects of different mould coatings on polymer filling flow in thin-wall injection moulding Marco Sorgato, Davide Masato, Giovanni Lucchetta
|
S13-259 Oral
|
Morphology and electrical properties of injection-molded PP carbon-based nanocomposites Marta Zaccone, Ilaria Armentano, Federico Cesano, Domenica Scarano, Sara Cravanzola, Alberto Frache, Marco Monti
|
S13-158 Oral
|
Characterization of the Welding of Thermoplastic Sheathing of Offshore Pipelines Margaux ARIS-BROSOU, Jean-François AGASSANT, Noëlle BILLON, Michel VINCENT, Philippe HOFFMANN, Sylvain POPINEAU
|
Not avalaible |
S13-119 Oral
|
Modular Technological Inserts for Injection Molding Machines Dorothea Schneider, Kurt Schüpbach, Volker Reichert
|
S13-483 Oral
|
INDUCTION HEATING SIMULATION AND VALIDATION FOR THE PLASTIC INJECTION MOLDING PROCESS Clinton Kietzmann, Guillaume Rigoni, Lu Chen, Stéphane QUILLIET
|
S13-240 Oral
|
Taking into account normal stresses during simulation of thermoplastic injection molding Alexander Bakharev, Shishir Ray, Franco Costa, David Astbury, Russell Speight
|
S13-125 Oral
|
Simulation of the Influence of Thermal Properties of the Mould Steel on the Injection Moulding Process Clemens H. Holzer, Thomas Lucyshyn, Lara-Vanessa Des Enffans d´Avernas
|
S13-195 Oral
|
Unusual Tiger-striped Flow Mark Patterns Appeared in Injection Moldings of Polypropylene/Talc Compounds Shuichi Maeda
|
Not avalaible |
S13-178 Oral
|
Molecular Orientation and Residual Stresses Impact on Optical Properties of Plastic Lenses Michael Koch, Stefan Schneidmadel, Xiang Qin
|
S13-417 Oral
|
The Influence of Polymer Viscoelasticity on the Optical Features during an Optical Lens Development Gwo-Geng Lin, Huang Chao-Tsai, Hsien-Sen Chiu
|
S13-588 Oral
|
Designing and producing joining partners for a multi-material design by injection molding Markus Pohl, Markus Stommel
|
Not avalaible |
S13-765 Oral
|
Design and Fabrication of Injection Mold Using Gypsum Chung-Chih Lin, Bean-Yin Lee, Jenn-Yih Chen , Guo-How Lee
|
S13-743 Oral
|
Morphology and mechanical properties of micro-injection molded polymer products Shiwei Wang, Qian Li, Changyu Shen, Guohua HU
|
S13-726 Oral
|
Measurement of Fiber Orientation Distribution in Injection-molded Composites with High Filler Content Senji Hamanaka, Katsuhisa Yamashita, Chisato Nonomura, Thanh Binh Nguyen Thi, Atsushi Yokoyama
|
S13-698 Oral
|
Knowledge based approach for an automatic rheological optimization of injection molded parts Alexander Porsch, René Andrae, Johannes Wortberg, Peter Koehler
|
S13-655 Oral
|
ADHESION IN OVERMOLDING APPLICATIONS Vinayak Khatavkar, Michelle Seitz, Markus Bulters
|
Not avalaible |
S13-468 Oral
|
Investigation of Nanoparticles Emitted When Injection Molding Neat and Additive-filled Polypropylene and Polycarbonate Matthew Theriault, Suzanne Yoeuth, Jessica Matar, John Martin, Dhimiter Bello, Carol Barry
|
S13-620 Oral
|
Replication of hierarchical textured surfaces by injection molding: Global approach for the optimization of the replication quality Mathieu Larochette, Anne-Catherine Brulez, Stéphane Benayoun, Julie Vera
|
Not avalaible |
S13-485 Oral
|
Complex Injection Moulded Components - Bridging the Knowledge Gap Tino Meyer, Paul Sherratt, Barry Haworth, Andy Harland, Chris Holmes, Tim Lucas
|
S13-572 Oral
|
Fibre Dispersion and Fibre Length Distribution in Long Glass Fibre Reinforced PP Injection Mouldings Millan-John Gilson, Phillip Caton-Rose, Ben Whiteside, Adrian Kelly
|
Not avalaible |
S13-556 Oral
|
Comparison of mechanical and dimensional properties of polymeric microneedle arrays manufactured by micro-Injection moulding and ultrasound moulding. Karthik Jayan Nair, Benjamin Whiteside, Maksims Babenko, Collin Grant, Philip Coates
|
Not avalaible |
S13-52 Oral
|
Study on the Fiber Breakage History through a Barrier Structure Screw in Injection Molding Chao-Tsai Huang, Huan-Chang Tseng, Rong-Yeu Chang, Sheng-Jye Hwang
|
S13-518 Oral
|
Assembly injection molding of hard-soft material composites: Processing and adhesive strength test Ines Kuehnert, Martin Zimmermann
|
Not avalaible |
S13-515 Oral
|
Micro Injection Molding: Investigation of Interfacial Fracture Behavior Matthieu Fischer, Ines Kuehnert
|
S13-495 Oral
|
Influence of Processing Conditions and Filler Type and on the Crystallinity of PLA Compounds Gernot Alois Pacher, Thomas Hutterer, Gerald Roman Berger, Walter Friesenbichler
|
S13-494 Oral
|
Advanced Fiber Orientation Prediction for High Filler Content Short-fiber/Thermoplastic Composites Thanh Binh Nguyen Thi, Atsushi Yokoyama, Senji Hamanaka, Katsuhisa Yamashita, Chisato Nonomura
|
S13-42 Poster
|
Effects of environmental aging in polypropylene obtained by injection molding Rebeca Silva Grecco Romano, Washington Luiz Oliani, Helio Fernando Rodrigues Ferreto, Duclerc Fernandes Parra, Ademar Benevolo Lugao
|
S13-432 Poster
|
A Study on manufacturing thermoplastic CFRP products using Injection/Compression molding process Euichul Jeong, Jongsun Kim, Kyunghwan Yoon, Sangyong Lee, Jungeon Son, Sunghee Lee
|
S13-163 Poster
|
Study of Effects Gamma Radiation on Linear Low Density Polyethylene (LLDPE) Injected Helio Fernando Rodrigues Ferreto, Ana Claudia Feitoza Oliveira, Duclerc Ferreira Parra, Ademar Benévalo Lugão
|
Not avalaible |
S13-737 Poster
|
Morphology and mechanical properties of micro-injection molded polymer products Shiwei WANG, Qian LI, Guo-Hua HU
|
Not avalaible |
S13-99 Poster
|
Development of a highly segmented temperature control in injection moulding for reduced warpage and increased process stability Christian Hopmann, Matthias Theunissen, Mauritius Schmitz, Philipp Nikoleizig
|
S13-86 Poster
|
Production of plastics parts with partially or fully metallic surfaces using the In-Mould-Metal-Spraying (IMMS) Christian Hopmann, Matthias Theunissen, Philipp Ochotta, Sukran Katmer, Kirsten Bobzin, Mehmet Öte, Thomas Frederik Linke, Xifang Liao
|
S13-410 Poster
|
Competition among α, β and γ Phases in Ziegler−Natta (ZN) Isotactic Polypropylene by Viber Injection Molding Dashan Mi, Jie Zhang
|
Not avalaible |
S13-65 Reject
|
Title Max Michael Bauer
|
Not avalaible |