Name of Symposia: S03 - Extrusion and Extrusion Processes |
S03-39 Keynote
|
Experimental measurements of pressure, temperature and residence time in a co-kneader: effect of melt viscosity. Christian Carrot, Claude Raveyre, Benjamin Monchatre
|
Not avalaible |
S03-98 Keynote
|
40 YEARS of VIBRATION ASSISTED POLYMER PROCESSING: Understanding Polymer Physics as a Source of Innovations Jean Pierre IBAR
|
Not avalaible |
S03-543 Oral
|
A Novel Grooved Single Screw Extruder Design Jürgen Miethlinger, Christian Marschik
|
Not avalaible |
S03-162 Oral
|
Influence of Temperature on the Contact Angle of Polymer Melts on Tool Surfaces Gernot Zitzenbacher, Manuel Längauer, Zefeng Huang
|
Not avalaible |
S03-226 Oral
|
Existence of a critical thickness in coextruded multilayer films Adrien BIRONEAU, Alain GUINAULT, Gilles REGNIER, Guillaume MIQUELARD-GARNIER, Cyrille SOLLOGOUB
|
Not avalaible |
S03-284 Oral
|
How to postpone the Gross Melt Fracture in linear Polymer melt extrusion Makha NDAO, Hugo Domejean, Michel VALTIER, Ahmed ALLAL
|
Not avalaible |
S03-422 Oral
|
Experimental Investigation of the Mixing Quality of High-Performance Screws Hans-Jürgen Luger, Christian Marschik, René Gillhofer, Markus Grubauer, Jürgen Miethlinger
|
Not avalaible |
S03-431 Oral
|
Current Achievements in Experimental and Computational Modeling of Screw Extrusion Jürgen Miethlinger, Sophie Pachner, Christian Marschik, Hans-Jürgen Luger, Bernhard Löw-Baselli
|
Not avalaible |
S03-452 Oral
|
Solids Conveying in Lab Scale Smooth Barrel Single Screw Extruders Regarding the Material Parameters` Dependence on Pressure, Temperature and Velocity Christian Kneidinger, Stefan Schuschnigg, Manuel Längauer, Gernot Zitzenbacher, Jürgen Miethlinger
|
Not avalaible |
S03-488 Oral
|
Flow balancing in profile extrusion dies: a novel simplified methodology O. S. Carneiro, A. Rajkumar, L. L. Ferrás, C. Fernandes, M. Becker, J. M. Nóbrega
|
Not avalaible |
S03-131 Oral
|
Experimental and Theoretical Study on Starve Fed Single Screw Extrusion of Polymer Blends Krzysztof J. Wilczyński, Andrzej Nastaj, Adrian Lewandowski, Krzysztof Wilczyński
|
S03-527 Oral
|
A novel extrusion process using a special static mixer die and on-line ultrasound simultaneously Guadalupe Sanchez-Olivares, Antonio Sanchez-Solis, Fausto Calderas, Luis Medina-Torres, Octavio Manero
|
Not avalaible |
S03-549 Oral
|
Synthesis and Tribological Investigation of PVD Hard Coatings deposited via Hybrid dcMS/HPPMS for Application in Plastics Processing Kirsten Bobzin, Tobias Brögelmann, Nathan C. Kruppe, Mona Naderi
|
S03-55 Oral
|
Development of a method for a realistically and reproducible contamination of polymer melt filters Peter Meilwes, Volker Schöppner
|
S03-668 Oral
|
Facile route to fabricate polymeric materials with alternating multilayer structure: toward high performances Shaoyun Guo , Jiabin Shen
|
Not avalaible |
S03-685 Oral
|
Turnkey Extrusion Lines for Highly-Filled Compounds: Compounding of CaCo3 Formulations Richard Kretz, Michael Thummert
|
S03-702 Oral
|
Numerical Investigation of Geometrical Changes in the Cooling Configuration for Improving the Output of High Capacity Blown Film Extrusion Lines Benedikt Paul August Neubert, Johannes Karl Wortberg
|
Not avalaible |
S03-707 Oral
|
Melt-Mixing by Pitched-Tip Kneading Disks in a Twin-Screw Extruder- Experimental Verification - Toshihisa Kajiwara, Yasuya Nakayama, Hiroki Takemitsu, Satoshi Esaki, Takahide Takeuchi, Koichi KImura, Hideki Tomiyama
|
Not avalaible |
S03-730 Oral
|
Die build-up issues in extrusion - Tailor made fuoropolymers as useful and efficient processing aids Florent ABGRALL, Samuel DEVISME, François BEAUME
|
Not avalaible |
S03-81 Oral
|
Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes Christian Hopmann, Nafi Yesildag, Christian Windeck, Sebastian Bremen, Konrad Wissenbach, Simon Merkt
|
S03-83 Oral
|
Groove Geometry and Bulk Material Properties Impacting on Pressure Build-up in Single Screw Extruders Matthias Düngen, Michael Müller, Michael Koch
|
S03-96 Oral
|
First insight into the High Speed Extrusion of Polycarbonate Max Pohl, Volker Schöppner
|
S03-512 Oral
|
Study of the Rheological Behavior of Polypropylene/Polyethylene Extruded Mixture Using an Instrumented Die Ghinwa EL HAJJ SLEIMAN, Sofiane BELHABIB, Isabelle PETIT, Nadine ALLANIC, Rémi DETERRE
|
S03-398 Poster
|
Wasted Tire Ground Rubber/ Wood flour optimized ratio Toward the High Mechanical Properties in Polypropylene composite Ratiporn Thongthanom, Hathaikarn Manuspiya
|
S03-773 Poster
|
Electrification of polymers during capillary extrusion A. Perolo, A. Castiglioni, D. Ferri
|
S03-386 Poster
|
Shell-mimicking structure of polylactide fabricated through layer-assembly extrusion: toward high strength and toughness Longfei Yi, Jiabin Shen, Shaoyun Guo
|
S03-2 Poster
|
The Effect of Die Head Temperature (DHT) on the Mechanical and Physical Properties of Polyolefin Virgin/Waste Blends S. M. Al-Salem
|
Not avalaible |