Name of Symposia: S08 - Polymer Foams |
S08-449 Keynote
|
Novel Halogen-free Flame Retardant Polymer Foams Qi Wang, Xue Chen, Dan Guo, Shibing Bai, Yuan Liu, Li Li
|
S08-658 Keynote
|
The Cold-Crystallization Behavior of Poly(L-lactide) under CO2 Investigated by an In Situ High Pressure FTIR and Its Effect on Foam Morphology Ting He, Xia Liao, Guangxian Li
|
S08-633 Keynote
|
Gas foaming to generate hollow polymeric micro- and nano-particles Silvia Orsi, Ernesto Di Maio, Paolo Antonio Netti, Salvatore Iannace
|
Not avalaible |
S08-661 Keynote
|
Control of Open Cell Content of Polypropylene Foam by Core-back Foam Injection Molding with Low Tacticity Polypropylene Masahiro Ohshima, Ryoma Miyamoto, Shunya Yasuhara, Haruo Shikuma
|
S08-460 Keynote
|
Synthesis, electrical conductivity, and mechanical properties of nano/microcellular polypropylene/CNT nanocomposites Aboutaleb Ameli, Chul B Park, Petra Pötschke, Ghaus Rizvi, Michel Huneault
|
S08-301 Oral
|
Effects of Glycerol Monosterate on TPUs Crystallization and its Foaming Behavior Nemat Hossieny, Mohammad Reza Nofar, Vahid Shaayegan, Chul B Park
|
S08-418 Oral
|
Piezoresistance Characterization of Porous TPU-MWNT Nanocomposites Reza Rizvi, Hani Naguib
|
S08-591 Oral
|
INFLUENCE OF PROCESSING PARAMETERS ON SURFACE ROUGHNESS AND FOAM MORHOLOGY OF FOAM-EXTRUDED POLYETHERIMIDE Clemens Patrick Keilholz, Andreas Gallert, Thomas Köppl, Volker Altstädt
|
S08-268 Oral
|
Measurement and Use of the Viscosity-Function of Gas-Impregnated Polymer Melts to Tailor Extrusion Foams Maria-Kristin Sommer, Maik Nowak, Roland Hingmann, Erik Wassner
|
S08-640 Oral
|
Microcellular Injection Molding and Particulate Leaching of Thermoplastic Polyurethane (TPU) Scaffolds Haoyang Mi, Xin Jing, Lih-Sheng Turng, Xiang-fang Peng
|
S08-554 Oral
|
Influence of Different Fillers on the Processing Behavior and Mechanical Properties of Physically Foamed Polyethylene Bernd Geissler, Anna Uray, Stephan Laske, Clemens Holzer, Günter R. Langecker
|
S08-590 Oral
|
Microstructure and Mechanical Properties of Polypropylene/Graphite Nanocomposite foams mohammad Fasihi, Hamid Garmabi, Seyed Reza Ghaffarian, Masahiro Ohshima
|
S08-259 Oral
|
Foam injection moulding of a TPO/TPC-blend and the effect of different nucleating agents on the resulting foam structure Johannes Müller, Andreas Spoerrer, Volker Altstaedt
|
S08-157 Oral
|
Biopolymer foam - Relationship between material characteristics and foaming behavior of cellulose based polymers Florian Rapp, Anja Schneider, Peter Elsner
|
S08-112 Oral
|
Foams from High-Performance Thermoplastic Blends Luigi Sorrentino, Livia Cafiero, Salvatore Iannace
|
S08-458 Oral
|
Two Approaches of Introduction of Wheat Straw Lignin in Rigid Polyurethane Foams Alexander Arshanitsa, Aiga Paberza, Laima Vevere, Ugis Cabulis, Galina Telysheva
|
S08-666 Oral
|
FOAM INJECTION MOLDING OF POLY(LACTIC ACID) WITH PHYSICAL BLOWING AGENTS Roberto Pantani, Andrea Sorrentino, Valentina Volpe, Giuseppe Titomanlio
|
S08-651 Oral
|
EXPERIMENTS TO ESTIMATE POLYURETHANE FOAM REACTION KINETICS Lisa A. Mondy, Rekha R. Rao, Mat C. Celinas, Adam Quintana, Bion Shelden, Nicholas Wyatt, Edward Russick
|
S08-838 Oral
|
AIR TEMPLATED BIO-BASED POLYMER NANOCOMPOSITE FOAMS koonyang Lee, Ling Wong, John Hodgkinson, Alexander Bismarck
|
S08-65 Oral
|
Concepts for particle foam based ultralight automotive interior parts Christian Trassl, Volker Altstädt, Peter Schreier
|
S08-938 Oral
|
Dynamic Mechanical Thermal Analysis of Foams Herbert Mucha
|
Not avalaible |
S08-739 Oral
|
Microcellular foam processing and characterization of Poly(lactic acid) based blend foams for biomedical applications Jutika Goswami, Anup K. Ghosh, Naresh Bhatnagar
|
Not avalaible |
S08-883 Oral
|
Morphological Development of Bio-foam based on plasticized PLA Nanocomposites SABAPATHY SANKAR, ANUP KUMAR GHOSH
|
Not avalaible |
S08-278 Poster
|
PREDICTION OF AN EFFECTIVE PHYSICAL FOAMABILITY OF LLDPE/LDPE BLENDS FROM RHEOLOGICAL ASSESSMENTS Elisabeth Carvalho Leite Cardoso, Sandra Regina Scagliusi, Ademar Benevolo Lugão
|
S08-882 Poster
|
Chemical resistance of core-shell particles (PS/PMMA) polymerized by Seeded Suspension Luiz Fernando Ribeiro, Mariana Zimmermann Antunes, Odinei Hess Gonçalves, Ricardo antonio francisco Machado
|
S08-310 Poster
|
Surface modification of polypropylene based particle foams Peter Schreier, Volker Altstädt, Christian Trassl
|
S08-162 Poster
|
Up-Cycling of Elastomeric Waste Residues into Acoustic and Thermal Insulation Materials Hadj Benkreira, Kirill Horoshenkov, Amir Khan, Sararat Mahasaranon
|
Not avalaible |
S08-821 Poster
|
Foam injection molding of thermoplastic elastomers: blowing agents, foaming process and characterization of structural foams Stefan Ries, Andreas Spoerrer, Volker Altstaedt
|
S08-899 Poster
|
The Effect of Blending Modification with HDPE on the LDPE Foam Morphology and Expansion Peyman Shahi, Amir Hossein Behravesh, Ahmadzia Ahmadzi
|
Not avalaible |
S08-124 Poster
|
Heat Transfer in Polymeric Foams Sina Valaei, Siamak Motahari
|
Not avalaible |
S08-111 Poster
|
Investigation the changes of mechanical properties of polymethacrylimide (PMI) foam with density AmirMajid Kadkhodaie
|
Not avalaible |
S08-106 Poster
|
Comparing super critical and chemical foaming of polymethacrylimide (PMI) AmirMajid Kadkhodaie
|
Not avalaible |
S08-19 Poster
|
Preparation and chemical Properties of Polymethacrylimid Foam Shahla Eskandari Shahraki, Amin Hasanzadeh, Sirus Bahrami Gharrghani
|
Not avalaible |
S08-320 Poster
|
USE OF THE BOTTOM PHASE RESIDUE FROM POLYURETHANE GLYCOLYSIS AS POLYOL POLYMERISATION INITIATOR Diego Simón Herrero, Ana María Borreguero Simón, Antonio de Lucas Martínez, Carolina Molero Cerezo, Juan Francisco Rodríguez Romero
|
S08-573 Poster
|
An experimental apparatus to characterize phase separation in polymer solutions Gianluca Antonio Mannella, Vincenzo La Carrubba, Valerio Brucato
|
S08-362 Poster
|
Investigation of the shear nucleation in the extrusion foaming systems Mohammad Ako, Mohammad Hosein Navid Famili
|
Not avalaible |
S08-775 Poster
|
Potential of Carbon-Based Nanoparticles (CNT, CB, Graphene) to increase the Nucleation Density of Extruded Polystyrene Foam Chimezie Okolieocha
|
S08-763 Poster
|
Development of polymer wicks for EEG electrodes Ana C Martins, Armando R Mota, Joao Miguel Nobrega, Carlos Fonseca, Ana Vera Machado, Filipe Vaz
|
S08-511 Poster
|
Rheology of polystyrene dissolved in monoterpenes ricardo antonio francisco machado, Rafael Ferraz Cella, Ariovaldo Bolzan
|
S08-676 Poster
|
Effects of reactive compatibilized PLA-modified EVA blends on mechanical property and foam morphology Pongprapat Piyamanocha, Natthapong Chuapon, Juthaporn Vipachon, Rathanawan Magaraphan, Surat Areerat
|
Not avalaible |
S08-103 Poster
|
Biodegradable starch-based foam for cushioning use Georges ABI NADER
|
Not avalaible |
S08-99 Poster
|
Fabrication of super-low density thermoplastic polyimide microcellular foam for thermal insulation applications WENTAO ZHAI
|
Not avalaible |
S08-597 Poster
|
Foaming of Recycled Crosslinked Low Density Polyethylenes via Supercritical Fluid Reactions Soon Man Hong, Bumki Baek, Jiwook Shin, Chong Min Koo
|
S08-611 Poster
|
The effect of surface chemistry on the microcellular structure of polystyrene/nanosilica nanocomposites foam Seyed Esmaeil Zakiyan, Mozaffar Mokhtari Motameni, Mohammad Hossein Navid Famili
|
S08-614 Poster
|
Nono-Silica based polystyrene nanocomposite microcellular foam using supercritical carbon dioxide as blowing agent Seyed Esmaeil Zakiyan, Mozaffar Mokhtari Motameni, Mohammad Hossein Navid Famili
|
S08-66 Poster
|
Development of the theoretical basis for the reduction of the energy consumption at the bead foam process Micheal Fafara
|
Not avalaible |
S08-324 Poster
|
EFFECT OF THE MICROENCAPSULATED PCMs TYPE ON RIGID POLYURETHANE FOAMS PROPERTIES Ana Maria Borreguero, Manuel Carmona, Juan Francisco Rodriguez, Jose Luis Valverde
|