Name of Symposia: S04 - Injection Molding and Molds |
S04-704 Keynote
|
Molding of Realistic Surgical Training Models/Phantoms Leo Millon, Daniel Park, John Denstedt, Andrew Hrymak
|
S04-11 Keynote
|
NEW APPROACH TO ELECTROMAGNETIC INTERFERENCE (EMI) SHIELDING OF PLASTIC PARTS USING IN MOLD COATED (IMC) NANOPAPER Eusebio Cabrera, Seunghyun Ko, Xilian Ouyang, Jose M Castro, James L Lee, Elliott Straus
|
S04-194 Keynote
|
Multilayer Injection moulding of thick-walled optical plastics parts Mathias Weber, Christian Hopmann, Andreas Neuß, Paul Walach
|
S04-647 Keynote
|
Microstructure and morphology of micro injection molded plastics micro gears Musa R. Kamal, Rabie El Otmani, Abdessalem Derdouri
|
S04-332 Oral
|
INFLUENCE OF INJECTION MOLDING PROCESSING ON THE PROPERTIES OF PHENOLIC PARTS Martin Höer, Gerrit Hülder, Michael Gehde
|
Not avalaible |
S04-760 Oral
|
INFLUENCE OF POLYPROPYLENE SURFACE MORPHOLOGY IN THE ADHESION OF INJECTION MOLDED PARTS Marta Gomes, António Pontes, Júlio Viana
|
S04-291 Oral
|
Warpage Analysis of Injection Molded Thin LCP Parts in a Hot Environment Toshio Sugita, Masahiro Seto, Tohru Suzuki, Masashi Yamabe
|
S04-241 Oral
|
High speed visualisation of cooling phenomena in micromoulding processes Ben Whiteside, Max Babenko, Keith Norris, Gabriela Gonzalez-Castro, John Sweeney, Samuel Bigot, Phil Coates
|
S04-261 Oral
|
Analysis of the Filling Cycle and Automated Determination of the Change-over point with Sensor Systems on the Machine and Comparison with Conventional Switchover Methods in Injection Molding Stefan Kruppa, Reinhard Schiffers, Severin Hämmerl, Erhard Krampe, Erich Wintermantel
|
S04-245 Oral
|
A Wide Varity of Micro Injection Molding Technologies is now Applicable to Small Series and Mass Production Peter Bloss, G. Juettner, S. Jacob, J. Michaelis, P. Krajewsky
|
S04-48 Oral
|
Determination of heat transfer coefficients at the polymer-mould-interface for injection molding simulation by means of calorimetry Michael Stricker, Georg Steinbichler
|
S04-330 Oral
|
Material data of high-performance, highly-filled thermoplastic compounds for injection molding simulation with variothermal mold temperature control Antje Birkholz, Johannes Wortberg
|
S04-86 Oral
|
Scale effects in the micromoulding of polypropylene-clay nanocomposites and model blends Phil Coates, Yinghong Chen, Qi Yang, Qi Wang, Guangxian Li, Ben Whiteside
|
S04-887 Oral
|
Characterization of polymer fluid behaviour in microchannels Marcelo Costa, Joel Vasco, Antonio S. Pouzada, Antonio J. Pontes
|
S04-312 Oral
|
Process Simulation and In-Cavity Pressure Measurement for Thin-Wall Injection Moulding Barry Haworth, Aravind Mullath, Jorge Carao, Clive Fenn
|
S04-622 Oral
|
Polymer behavior and mold filling of thin wall cavities Cheima Mnekbi, Michel Vincent, Jean-Francois Agassant
|
S04-161 Oral
|
Micro mould and micro over moulding process development for moulding of bio-degradable PLC/PCL polymer compound for medical implant application GE CHEN, Sin Min Low, Xiaowen Yuan, Yingying Huang , Yee Shan Wong , Subbu Venkatraman
|
Not avalaible |
S04-377 Oral
|
Inline quality prognosis of material induces process disturbances Felix Alexander Heinzler, Johannes Wortberg
|
S04-552 Oral
|
In-Mold Sensor Concept to calculate process-specific Rheological Properties Gernot Alois Pacher, Gerald Roman Berger, Walter Friesenbichler, Dieter Paul Gruber, Johannes Macher
|
S04-601 Oral
|
In-Mold Printing of polyolefins during Injection Molding Thomas Härtig, Agnieszka Kalinowska, Michael Gehde
|
S04-585 Oral
|
Influence of Mold Surface Temperature on Polymer Part Warpage in Rapid Heat Cycle Molding Gerald Roman Berger, Gernot A. Pacher, Dieter P. Gruber, Astrid Pichler, Walter Friesenbichler
|
S04-577 Oral
|
MOLD FILLING BEHAVIOR OF HIGHLY ANORGANIC FILLED PHENOLIC INJECTION MOLDING COMPOUNDS Sascha Englich, Thomas Scheffler, Michael Gehde
|
S04-105 Oral
|
Electrical Resistance Heating of Continuous Fiber Reinforced Thermoplastics in Injection Molding Process Tristan Koslowski, Christan Bonten
|
S04-570 Oral
|
Injection moulding of a large structured area with functional geometries in the sub-100 nano meter range Matteo Calaon, Guido Tosello, Peter Torben Tang, Jesper Nørregaard, Jorgen Garnaes, Wei Li, Hans Nørgaard Hansen
|
S04-564 Oral
|
Influence of process parameters on the replication of microstructured freeform surfaces Martin Burgsteiner, Florian Müller, Thomas Lucyshyn, Christian Kukla, Clemens Holzer
|
S04-751 Oral
|
NEW INSIGHTS INTO INTERFACES IN INJECTION MOLDED PARTS Ines Kühnert, Anne Schönfeldt, Maria Auf der Landwehr
|
S04-227 Oral
|
Factors Affecting the Ink Wash-off in In-mold Decoration of Injection Molded Parts Shih-Jung Liu
|
S04-535 Oral
|
A novel method for the characterization of surface defects remarkably close to the human perception Dieter P. Gruber, Gernot Pacher, Johannes Macher, Gerald R. Berger, Walter Friesenbichler
|
Not avalaible |
S04-236 Oral
|
Effect of screw designs on fiber breakage and dispersion of GFRTP in injection molding plasticization Akira Inoue, So Shimokusuzono, Masayoshi Nomoto, Tatsuya Tanaka, Yoshihiko Arao
|
S04-518 Oral
|
The influence of different screw-concepts while processing fibre reinforced thermoplastics with the concept of inline-compounding on an injection moulding machine Ellen Albring, Elmar Moritzer, Rainer Kleeschulte
|
S04-681 Oral
|
PP-Polymer Nanocomposites with improved mechanical properties using elongational flow generating devices at the Injection Molding Compounder Walter Friesenbichler, Markus Battisti
|
S04-835 Oral
|
In mould laser welding for high precision polymer based optical components Nelson Oliveira, António J. Pontes
|
S04-195 Oral
|
Plasticizing and injecting smallest quantities of plastics Mathias Weber, Christian Hopmann, Andreas Neuß, Torben Fischer
|
S04-186 Poster
|
Determination of adhesion between thermoplastics and liquid silicone rubbers in hard-soft-combinations via a mechanical pealing test Christin Kühr, Andreas Spörrer, Volker Altstädt
|
S04-165 Poster
|
A Service Orientated Architecture and Wireless Sensor Network approach using Business Processes applied to measurement and control of a Micro Injection Moulding Process Data. Umar Raza, Ben R Whiteside, Fun Y Hu, Phil Coates
|
S04-119 Poster
|
Deformation behaviour of beta nucleated Polypropylene with processing-defined thermomechanical history as investigated by in-situ WAXS/SAXS Jianhong Chen, konrad Schneider
|
S04-859 Poster
|
Merits and Limits in Foam Injection Molding with Precision Opening of the Mold with Respect to Initial Wall Thickness and Expansion Ratio Norbert Müller, Manuel Hell
|
Not avalaible |
S04-832 Poster
|
A case study on the structural performance of a practical moulding in polypropylene structural foam Tiago Carvalho, Mariana Silva, Rui Soares, António S Pouzada, Carla I Martins
|
Not avalaible |
S04-75 Poster
|
A new multifunctional PvT device for the characterization of thermophysical properties of thermoplastics in extreme thermal conditions Xavier Tardif, Vincent Sobotka, Nicolas Boyard, Nicolas Lefèvre, Didier Delaunay
|
S04-670 Poster
|
Injection moulding controll by cavity pressure measuring system Andras Szucs, Karoly Belina
|
Not avalaible |
S04-636 Poster
|
In-line visualisation of polymer plastication in an injection moulding screw Thuy-Linh PHAM, Jean BALCAEN, YVES BEREAUX, Jean-Yves CHARMEAU, Sambor CHHAY
|
S04-63 Poster
|
In Mould Hold Pressure slashes Cycle time Ernst A Poppe
|
S04-833 Poster
|
Piezoresistive accelerometer produced by microinjection moulding Luis F. Martins, Luis A. Rocha, António J. Pontes
|
S04-405 Poster
|
Interface Conditions of Two-Shot Molded Parts Thomas Kisslinger, Katharina Bruckmoser, Thomas Lucyshyn, Guenter Ruediger Langecker, Clemens Holzer
|
S04-571 Poster
|
Deformation analysis of an Automotive Part by Injection Molding Simulation: Influence of Material data and Mold Modelling on Prediction Quality. Hans-Jürgen Luger, Gerald Berger, Florian Müller, Walter Friesenbichler, Irmgard Beythollahi, Paul Filz
|
S04-565 Poster
|
Numerical Prediction of Powder Concentration for Mold Filling Simulations of Powder Injection Molding Huan-Chang Tseng, Yuan-Jung Chang, Chia-Hsiang Hsu, Rong-Yeu Chang
|
S04-550 Poster
|
Processability and Quality Improvement of Transparent Polylactic Acid (PLA) Packaging through Injection Compression Molding Patcharee Larpsuriyakul, Natcha Prakymoramas, Dumrong Thanomjitr
|
Not avalaible |
S04-529 Poster
|
Variotherm injection molding process with BFMold® technology and electric heating: Simulation and experimental validation Astrid Pichler, Primož Rus, Christian Kukla, Gerald Berger, Florian Müller, Thomas Lucyshyn, Gernot Pacher, Walter Friesenbichler
|
S04-519 Poster
|
Impact of the Injection-molding Parameters on the Fiber-length Distribution and the Mechanical Properties of a Short Carbon Fiber Reinforced Polyphenylene Sulfide (PPS) Marian Janko, Thomas Lucyshyn, Sandra Schlögl, Patrick Raimann, Dietmar Lenko, Thomas Meisel, Clemens Holzer
|
S04-500 Poster
|
Interaction Between Injection-molding Parameters, Fiber Orientation and Warpage in Short-fiber Reinforced Polyphenylene Sulfide (PPS) Valve Plates Thomas Lucyshyn, Marian Janko, Michael Schmid, Clemens Holzer
|
S04-492 Poster
|
The effects of reprocessing cycles on the structure and properties of polypropylene copolymer Renan Demori, Leandro Laitano, Vandro Felipe Weschenfelder, Luis Henrique Alves Cândido, Wilson Kindlein Júnior , Raquel S. Mauler
|
S04-451 Poster
|
Micro-injection Molding of Poly (vinyl alcohol)/hydroxyapatite Nano-composites Li Li, Ning Chen, Leigh Mulvaney-Johnson, Benjamin Richard Whiteside, Qi Wang, Phil Coates
|
S04-266 Poster
|
Investigations on abrasive wear in a novel injection molding capillary slit die Bianca Purgleitner, Christoph Burgstaller, Christian Kneidinger, Gernot Schaffler
|
S04-407 Poster
|
Design of a Demolding Force Measurement Tool for Injection Molding Tobias Struklec, Martin Burgsteiner, Thomas Lucyshyn, Werner Balika, Stefan Moderegger , Clemens Holzer
|
S04-238 Poster
|
The influence of the mould cavity thickness on the course of foaming process, structure and properties of porous injection moulded parts Pawel Palutkiewicz
|
Not avalaible |
S04-397 Poster
|
Prediction of Mechanical Properties of Injection Molded Parts Yoshinori Inoue, Kenji Imai, Satoru Yamamoto
|
S04-387 Poster
|
Activation Pressure Investigation for a Purely Mechanical Wireless In-Mould Sensor Florian Müller, Christian Kukla, Thomas Lucyshyn, Clemens Holzer
|
S04-360 Poster
|
The influence of injection moulding on the flexural strength and surface quality of long glass-fiber reinforced polyamide 6.6 Daniel Teixeira, Marcelo Giovanela, Larissa Nardini Carli, Laura Berasain Gonella, Janaina da Silva Crespo
|
S04-322 Poster
|
Enclosure of Electronic Assembly Groups by means of Thermoset Assembly Injection Molding – Study on the Basic Impacts of Materials and Process Christoph Heinle, Simon Amesoeder
|
Not avalaible |
S04-319 Poster
|
Innovative Plasticizing Concept Thomas Brettnich
|
Not avalaible |
S04-314 Poster
|
Effect of Talc Size on Recycled PET Injection Moldings Kazushi Yamada
|
S04-271 Poster
|
Ultrasound based monitoring of the injection moulding process - methods, applications and limitations Bernhard Praher, Klaus Straka, Jesenka Usanovic, Georg Steinbichler
|
S04-10 Poster
|
Das Spritzgussverfahren mittels Thermoanalytischer Methoden besser verstehen: das revolutionäre Flash DSC 1 – Instrument Dirk Neff
|
Not avalaible |
S04-256 Poster
|
The Study for Taguchi Method on the Design of Core Plate and Support Pillar Wen-Ren Jong, Shia-Chung Chen, Cheng-Hao Lin, Yu-Hung Ting
|
Not avalaible |
S04-448 Poster
|
Modeling and Simulation of Sinkmarks for Epoxy Encapsulation of IC Packages hung-yang huang, shi-chang tseng
|
Not avalaible |