PPS Conferences Proceedings
       
Home > PPS-29 (2013) > S13 - Polymer Blends
Name of Symposia: S13 - Polymer Blends
S13-389
Keynote
High Temperature Resistant Polymer Compounds
Christian Maletzko, Florian Hennenberger, Martin Weber
Not avalaible
S13-39
Keynote
Structural characterization of bi-oriented blown films of polypropylene/polyethylene blends
Sebastiăo Vicente Canevarolo, Felipe Oliveira Campos Bernardo, John Alexander Zapatta Hincapie, Jorge Manoel Jardim Silva
S13-461
Keynote
Coalescence of drops with tangentially-mobile interfaces
Michael Loewenberg, Martin Nemer, Jerzy Blawzdziewicz
S13-789
Keynote
Using the localization behavior of carbon nanotubes in melt-mixed immiscible polymer blends to estimate surface energy properties of nanotubes
Petra Pötschke, Andreas Göldel
Not avalaible
S13-660
Oral
Effects of Unmodified Layered Silicate on the crystallization and Phase Separation Phenomena of Polyethylene/Ethylene Vinyl Acetate Copolymer Blends
Farkhondeh Hemmati, Hamid Garmabi, Hamid Modarress
S13-619
Oral
How to take advantage of nanofillers to improve the ductility of immiscible polypropylene/polyamide blends?
Jeremie Soulestin, David Lemény, Marie-France Lacrampe, Patricia Krawczak
S13-523
Oral
Small Angle Light Scattering for Morphology Control: From Laboratory to Process
Ingo Alig, Bernd Steinhoff
S13-481
Oral
Preparation and Properties of High Scattering Polycarbonate (PC) Composite with Controllable Light Scattering
Shaoyun Guo, Xianming Dong, Ying Xiong
Not avalaible
S13-479
Oral
The morphological evolution of ethylene-vinyl alcohol copolymer and its effect on the gas barrier properties of polyethylene in the layer-multiplying process
Jiaming Zhu, Jiabin Shen, Shaoyun Guo
Not avalaible
S13-113
Oral
Control of the morphology of PLA/PBAT/PA ternary blends through the use of a PBAT-b-PLA copolymer
Yang Fu, Elena Dolci, Trang Phan, Didier Gigmes, Edith Peuvrel-Disdier, Patrick Navard
S13-431
Oral
Structural Formation under Polymer Processing-Relevant Conditions
Yunfeng Zhao, Yijing Nie, Wenbing Hu, Go Matsuba, Hiroshi Ito
S13-31
Oral
EFFECT OF POLYSTYRENE ON THE CRYSTALLIZATION OF POLY(3-HYDROXYBUTYRATE)
Camila Ventura Lima, Inaldo Cesar Araujo, Yęda Medeiros Bastos Almeida, Marcelo Silveira Rabello, Renate Maria Ramos Wellen, Eduardo Luis Canedo
S13-416
Oral
High Throughput Compound Development: A New Tool For Accelerated Discovery
Gerhard Maier
S13-908
Oral
Newly developed polymer alloy using adhesive fluoropolymer
Eiichi Nishi, Takashi Satou
Not avalaible
S13-128
Oral
Morphological Studies on Block Copolymer Modified High Impact PA 6 Blends
Marcus Poindl, Christian Bonten
S13--13
Oral
Recent Results and Persisting Problems in Modeling Flow Induced Coalescence
Ivan Fortelny, Josef Juza
S13-295
Oral
PP/LDPE blend-based (nano)composites — Effect of PP matrix flow property
Fang-Chyou Chiu, Cheng-En Lee
S13-276
Oral
Recycling cycle of materials applied to acrylonitrile-butadiene-styrene / policarbonate blends with styrene-butadiene-styrene copolymer addition
Luis H.A. Cândido Cândido, Daiane Ferreira Ferreira , Wilson J. Kindlein Kindlein, Renan Demori Demori , Ranquel Mauler Mauler
S13-158
Oral
Prediction of phase inversion composition in compatibilized Polyamide6/High Density Polyethylene blends
Chloe Epinat
S13-131
Oral
SEBS-g-MAH as a reactive compatibilizer precursor for PP/PTT/SEBS ternary blends: Morphology and mechanical properties
Omid Moini Jazani, Ahmad Arefazar, Seyyed Hassan Jafari, Navid Jaberzadeh Ansari, Alireza Talaei
Not avalaible
S13-427
Oral
Directed phase separation of PFO:PS blends during spin-coating using feedback controlled in-situ stroboscopic fluorescence microscopy.
Daniel Thomas William Toolan
Not avalaible
S13-738
Oral
Influence of Electron Beam Irradiation on the Mechanical and Thermal Properties of Polypropylene/Polyamide6 Blends
SHIGEYA NAKAMURA, TOKUMITSU KATSUHISA
S13-84
Oral
Effects of SEBS on morphology and fracture micromechanisms of PP/PC/SEBS ternary blends
Alireza Azizi, Ahmad Arefazar, Omid Moini Jazani
S13-783
Oral
Study of miscible blends of poly(ether ketone ketone) (PEKK) and poly(ether imide) (PEI)
Sébastien DOMINGUEZ, Christophe DERAIL, Frédéric LEONARDI, Jérôme PASCAL, Benoît BRULE
Not avalaible
S13-757
Oral
Formation of Banded and Non-banded Poly(L-lactic acid) Spherulites during Crystallization of Films of Poly(L-lactic acid)/Poly(ethylene oxide) Blends
Guoxing Sun, Lu-Tao Weng, Jerold M Schultz, Chi Ming Chan
S13-753
Oral
Nano-scale Janus particles as compatibilizers for tailoring the microstructure of PPE/SAN immiscible polymer blends
Ronak Bahrami, Tina Löbling, Holger Schmalz, Axel. H. E. Müller, Volker Altstädt
S13-673
Oral
Heat Resistant Fully Bio-based Poly(lactic acid)/Polyamide 11 Nanocomposite Blends
Giovanni Filippone, Anna Nuzzo
S13-91
Poster
Use of High Speed Separation for Multi Dimensional Chromatographic Analysis During Polymer Synthesis
Jens A. Jacobsen, Michael O´Leary
Not avalaible
S13-300
Poster
The effect of architecture of polymer chain on the crystallization of PLLA
Tun-Han Hsu, Tun-Hao Huang, Hung-Wei Pan, Wen-Bin Liau
S13-230
Poster
Mechanical properties at low temperatures of UHMWPE/HDPE prepared by stacking inflation-films
Katsuhisa Tokumitsu, Aiko Iguchi, Hideharu Ohira
S13-222
Poster
Nonisothermal Crystallization and Fusion of PET/PS Blends. Part I: Effect of PS Content
Renate M R Wellen, Marcelo S Rabello, Eduardo L Canedo
S13-211
Poster
Effects of particle size and interfacial adhesion on mechanical properties of polyethylene /ethylene vinyl alcohol copolymer /polyamide blends
Nadia Jalalifar, Hossein Ali Khonakdar, Zahed Ahmadi, Udo Wagenknecht, Gert Heinrich
Not avalaible
S13-168
Poster
ABS/HIPS BLENDS OBTAINED FROM WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
Adriana M. Catelli Souza, Adriana Vitório Ereio
S13-16
Poster
A novel method of enhancing hydrophilicity of PET surface through melt blending process
ahmad rezaei kolahchi
Not avalaible
S13-606
Poster
Nonisothermal Crystallization and Fusion of PET/PS Blends. Part II: Effect of Heating Rate
Renate Maria Ramos Wellen, Marcelo Silveira Rabello, Eduardo Luis Canedo
S13-774
Poster
“New biodegradable polymer blends with heat-shrinkable properties”
Violette Bourg, Nicolas Le Moigne, Patrick Ienny, Anne Bergeret
Not avalaible
S13-134
Poster
The influence of NBR-g-GMA Compatibilizer on the Morphology and Mechanical Properties of Poly (ethylene terephthalate) /Polycarbonate/NBR Ternary Blends
Mohammad Reza Peymanfar, Ahmad Arefazar, Omid Moini Jazani, Navid Jaberzadeh Ansari, Alireza Talaei
Not avalaible
S13-600
Poster
Specific interactions convinces partial miscibility in Poly (vinylidene fluoride)-acrylic rubber blends
Mohammad Mahdi Abolhasani, Azam Jalali-Arani, Hosein Nazockdast, Qipeng Guo
Not avalaible
S13-791
Poster
Tuning the localization behavior of MWCNTs in immiscible polymer blends by a reactive component
Petra Pötschke, Marén Gültner, Andreas Göldel
S13-90
Poster
Application of UPC˛ to Extractables and Leachables Analysis
Jens A. Jacobsen, Baiba Cabovska, Michael D. Jones, Andrew Aubin
Not avalaible
S13-898
Poster
An investigation on morphology and dynamic mechanical properties of HIPS/HDPE/SBS blends
Azizeh Javadi, Maryam Ahmadi, Hossein Nazokdast
S13-805
Poster
Preparation and Investigation of Flammability Properties of UPVC/ABS blend
Ahmad Amirshaghaghi, Farhad Haghighifard, Shadi Houshyar Azar
Not avalaible
S13-672
Poster
Mechanical recycling of polyethylene terephtalate by blending with polyolefins - Compatibilizing with organoclays
Andrea Causa, Maria Chiara Mistretta, Domenico Acierno, Giovanni Filippone
S13-861
Poster
Multimodal polyethylene: 1. Melt Blending of Polyethylene
Abolfazl shenavar, Seddighe Mirhosseini khosrowshahi
Not avalaible
S13-120
Poster
Asphalt/polyethylene blends: Rheological Properties, Microstructure and Viscosity modeling
Maria Vargas
Not avalaible
S13-15
Poster
Determination of binodal curves in ternary polymer systems
Francisco Torrens, Gloria Castellano
Not avalaible
S13-724
Poster
Mechanical Properties and Morphology Correlation in Compatibilized Polypropylene and Polyamide6 Blends
Nadia Jalalifar
Not avalaible
S13-599
Poster
DSC analyse of observed dual lamellar crystalline structure in Poly (vinylidene fluoride)-acrylic rubber blends
Mohammad Mahdi Abolhasani, Qipeng Guo, Azam Jalali-Arani, Hosein Nazockdast
Not avalaible
S13-499
Poster
PS/PP Polymer Blends Containing Carbon Nanotubes and Block Copolymer Compatibilizer for EMI Shielding Applications
Ivonne Otero Navas, Uttandaraman Sundararaj
S13-689
Poster
MECHANICAL AND BARRIER PROPERTIES OF PP/HYDROCARBON RESIN BLENDS
Marlon da Costa, Anne Chinellato, Suel Vidotti
Not avalaible
S13-862
Poster
Multimodal polyethylene: 2. Reactive compatibilization of polyethylene blends
Abolfazl Shenavar, Seddighe Mirhosseini khosrowshahi
Not avalaible
S13-690
Poster
MECHANICAL AND BARRIER PROPERTIES OF NANOCOMPOSITES FORMED FROM PP/HYDROCARBON RESIN BLENDS
Marlon da Costa, Suel Vidotti, Anne Chinellato
Not avalaible
S13-707
Poster
Addition of nucleating agents and study of their effect on isothermal and non isothermal crystallization of isotatic polypropylene blended with EPR rubber
Ricardo Bianchin Martin, Lucia Innocentini Mei, Ana Rita Morales, Antonio Rodolfo
Not avalaible
S13-447
Poster
Enhanced properties of poly(lactic acid) and natural rubber blend compatibilized with different types of organically-modified clays
Hyun Geun Ock, Young-Mi Chung, Kyung Hyun Ahn
S13-257
Poster
Effects of extrusion conditions on the phase morphology of PP/EVA blends containing organo-modified silica nanoparticles
Luisa Mondoni, Leonardo Bresciani Canto
S13-435
Poster
Influence of SEBS-g-MA on the Rheological Properties of PA6/PP Blends in Fully or Partially Molten State
Yosuke Nishitani, Masanori Shitsukawa, Kazuki Yamamoto, Takeshi Kitano
S13-578
Poster
Analysis of Complex Crystallization Peaks in PET/PS Blends
Eduardo Luis Canedo, Renate M R Wellen
S13-43
Poster
Microhardness of polymer blends: experiments versus predictions
Miroslav Slouf, Tatana Vackova, Nina Vranjes Penava, Ludmila Kapralkova
S13-727
Poster
MECHANICS AND RHEOLOGY OF NANOSILICA FILLED ETHYLENE-OCTEN COPOLMER/POLYPROPYLENE TPV
Omid Nouri , Saeedeh Mazinani , Milad Mehranpoor , Gholam Reza Moradhaseli
S13-730
Poster
INVESTIGATION ON MECHANCAL PROPERTIES OF EOC/EPDM TPV
Gholamreza Moradhaseli, Milad Mehranpour, Omid Nouri, Saeedeh Mazinani
Not avalaible
S13-734
Poster
Thermo-physical Study of Epoxy/ENP Blended Nanocomposite
Ali Aghajani , Mohammadreza Kalaee , Saeedeh Mazinani, Sahar Ghaffari
Not avalaible
S13-664
Poster
Phase Morphology and its Role on Tensile Properties in Ternary Blends of PP/PC/SEBS
Hadis Goodarzi, Omid Moini Jazani, Mohammad Reza Saeb
Not avalaible
S13-6
Poster
Tunable polymer actuators via a simple and versatile blending approach
Chong Min Koo, Soon Man Hong, Seong Sang Hwang
Not avalaible
S13-475
Poster
Preparation and Investigation of PVC-P/SAN Blend by Twin Screw Extruder
Ahmad Amirshaghaghi, Seyed Mehrdad Amiri, Mohamad Reza Haddadi
Not avalaible
S13-445
Poster
Physical properties of a low molecular weight hydroxyl-terminated polydimethylsiloxane modified castor oil-based polyurethane/epoxy IPN composites.
Shoubing Chen, Qihua Wang, Tingmei Wang
Not avalaible