| Name of Symposia: 7 - Process Modeling |
KL7-2
Keynote
|
Modeling Elongational Viscosity of Blends of Linear and Long-chain Branched Polypropylene
Wagner M.H., Kheirandish S., Stange J., Muenstedt H.
|
Not avalaible |
KL7-1
Keynote
|
Energy Dissipation in Compounding. A Comparative Study on Discontinous vs Continous Mixers
Stade K.H.
|
SL7-11
Oral
|
Numerical Modeling of Scale-up in Polyolefin Blown Film Processes
Khan A.A., Bhattacharya S.N.
|
SL7-1
Oral
|
Entropic Analysis of Laminar Mixing in Single Screw Extruders
Camesasca M., Kaufman M., Manas-Zloczower I.
|
SL7-2
Oral
|
Velocity, Residence Time and Mixing Efficiency in a Helical Screw Channel
Moguedet M., Bereaux Y., Charmeau J.Y., Balcaen J.
|
SL7-3
Oral
|
Modeling Non-Newtonian Flow and Debris Deposition in Polymer Process Filtration
Cox C.L., Jenkins E.W., Mucha P.J.
|
SL7-4
Oral
|
Numerical Estimation of the Variation of the Fluid Element Area in Shear and Elongation Flow Field in Co-rotating Twin Screw Extruder
Salami Hosseini M., Sharif F., Nazockdast H.
|
SL7-5
Oral
|
Calculation and Optimization of Maddock and Egan Mixing Elements for Single Screw Plasticising Units
Zitzenbacher G., Karlbauer R., Thiel H., Langecker G.R.
|
SL7-6
Oral
|
A New Method for the Calculation of the Barrier Section of Single Screw Plastification Units
Potente H., Thuemen T., Pape J.
|
SL7-7
Oral
|
Three Dimensional Finite Element Modelling of the Convection Dominated Flow of Non-Newtonian Fluid Through a Wire Mesh
Ting K.C., Nassehi V., Wakeman R.J.
|
SL7-8
Oral
|
Energy Dissipation in Compounding. A Comparative Study on Discontinous vs Continous Mixers
Stade K.H.
|
Not avalaible |
Not avalaible |
SL7-10
Oral
|
Modeling of the Film Blowing Process by Using Variational Principles for High Stalk Bubbles
Zatloukal M., Saha P.
|
SL7-22
Oral
|
Finite Element Analysis of Melt Mixing Zone in Twin Screw Extruders with Special Geometries
Kajiwara T., Uotani A., Tomiyama H., Funatsu K.
|
SL7-12
Oral
|
An Attempt to Simulate the Optical Axes on Film during Tentering Process in Successive Biaxial Stretching Method
Yamada T., Sugihara G., Sato T., Arakawa K.
|
SL7-13
Oral
|
Analysis and Optimisation of the Polymer Wire Die-Drawing Process
Mohanraj J., Bonner M.J., Barton D.C., Ward I.M.
|
SL7-14
Oral
|
Simultaneous Optimization of Cost and Properties for a Conveyer Compound Using Taguchi Method with OEC Method
Ramazani A.S.A., Kamakani Z.
|
SL7-15
Oral
|
3D-Simulation of Warpage for Short Fibre Reinforced Thermoplastics
Kech A., HosdezV.
|
SL7-16
Oral
|
Mechanical Property Predictions in Fibre Reinforced Polyamide Injection Moulded Parts Using Measured and Predicted Fibre Orientation Within ABAQUS
Caton-Rose F., Hine P., Duckett A., Whiteside B., Coates P.D.
|
SL7-18
Oral
|
Optimisation of Micro Injection Moulding with Respect to Material Data under Process Conditions
Hosdez V., Kech A., Meylheuc L.
|
SL7-19
Oral
|
Setting up the Operating Window in Injection Moulding: Application of Multi-Objective Evolutionary Algorithms
Gaspar-Cunha A., Viana J.C.
|
SL7-20
Oral
|
Numerical Simulation of the Effect of Processing Parameters on the Flow Behavior and Breakthrough Phenomenon in Co-Injection Molding
Ilinca F., Hetu J.-F.
|
SL7-21
Oral
|
Micro-compression Filling Simulation Using the Stabilized Finite Element and Level Set Method
Kang T.G., Kwon T.H.
|
SL7-9
Oral
|
The Shape of Free Surface in Squeeze and Fountain Flows
Mitsoulis E., Matsoukas A.
|
PPS CONFERENCES PROCEEDINGS