Name of Symposia: 1 - Extrusion & Coating |
KL1-2 Keynote
|
Techniques for Monitoring Polymer Blend Compatibilization in a Twin Screw Extruder Covas J.A., Machado A.V., Yquel V., Flat J.-J.
|
KL1-3 Keynote
|
Polymer Processing Extrusion Instabilities and Methods for their Elimination or Minimisation Agassant J.-F., Arda D., Combeaud C., Merten A., Muenstedt H., Mackley M., Robert L., Vergnes B.
|
KL1-1 Keynote
|
Characteristics of Single Screw Compounding Extruder Rauwendaal C.
|
SL1-9 Oral
|
Optimizing the Cooling Efficiency of Calibrators for Extruded Profiles Nobrega J.M., Carneiro O.S.
|
SL1-1 Oral
|
Numerical Analysis on the Kinematic Reversal Conditions of Non-isothermal Flows in Single Screw Extruders Potente H., Bornemann M., Heinrich D.
|
SL1-2 Oral
|
Isothermal and Non-isothermal Analytical Solutions for Deep-Channel, Single-Screw Extruders Hami M.L.
|
SL1-3 Oral
|
Fluctuation in Mixing Quality During Single-screw Extrusion Lam Y., Wong A.C.-Y.
|
SL1-4 Oral
|
Investigation on the Anisotropic Pressure Propagation in Polymer Granular Material Schuschnigg S., Langecker G.R., Wegenberger A., Bauer A., Mayer T., Furthmayr A.
|
SL1-5 Oral
|
Examination of Feeding Behaviour and Solids Conveying in High Speed Extruder Wortberg J., Rahal H.
|
SL1-8 Oral
|
Numerical Analysis of New Cooling Screw Rauwendaal C.
|
SL1-19 Oral
|
Observations and Analysis of Polyethylene Melt Flow in a Coextrusion Geometry Martyn M.T., Zatloukal M., Spares R., Coates P.D.
|
SL1-10 Oral
|
Melt Rheology and Processing Variables on the Film Properties in Blown Film Extrusion Majumder K.K., Khan A., Bhattacharya S.N., Hobbs G.
|
SL1-11 Oral
|
Development of an Airflow Guidance to Provide Increasing Homogeneity and Intensification within the Blown Film Process Wortberg J., Eversmann J., Spirgatis J., Bussmann M.
|
SL1-12 Oral
|
Influence of Cooling-Water Temperature on Primary Film of Random-Polypropylene in Double Bubble Tubular Process Sakauchi K., Uehara H., Obata Y., Takebe T., Kanai T., Yamada T.
|
SL1-13 Oral
|
Realtime-Detection of Particulate Heterogeneities in Polymer Extrusion Processes Using Microphotometric Measuring Method Blinzler M., Brian B., Stephan M., Gro§e S., Stintz M., Rudolph A., Blankschein U.
|
SL1-14 Oral
|
Effect of Processing Conditions on the Formation of Polypropylene/ Organoclay Nanocomposites in a Twin Screw Extruder Lertwimolnun W., Vergnes B.
|
SL1-15 Oral
|
Chemical Reactions in Multi-Screw Extruders MSE Becker D., Poltersdorf B.
|
SL1-16 Oral
|
Extruded Profiles: a Study on the Processing-Microstructure-Properties Relationships Carneiro O.S., Viana J.C., Nobrega J.M.
|
SL1-18 Oral
|
The Influence of Process Aids on the Zig-zag Type of Interfacial Instabilities in Multi-Layer Flows: Theoretical and Experimental Investigation Zatloukal M., deWitte J.
|
SL1-6 Oral
|
Numerical Study on the Transient Contraction Flow Tubagus N.H., Sugiyama K., Shiohara M.
|
Not avalaible |