| Name of Symposia: 2 - Injection Molding & Molds |
KL2-2
Keynote
|
Dynamic Visualization of Melt Flow Behaviour inside Split Runners in Ultra-High-Speed Injection Molding
Hasegawa S., Yokoi H.
|
KL2-3
Keynote
|
Electric Injection Molding Machine with New Process Technology and Linear Motor Drives
Wortberg J., Schiffers R.
|
KL2-1
Keynote
|
Injection Moulding Microparts - Production Solutions with Screw-Plunger Injection Moulding Machines
Kleinebrahm M.
|
SL2-5
Oral
|
Analysis of the Replication Properties of Lightguiding Plate between Micro Injection Molding and Micro Injection Compression Molding
Shen Y.K.
|
SL2-13
Oral
|
Reduction of Injection Pressure in Injection Moulding Using Cavity Pre-heating
Polynkin A., Pittman J.F.T., Sienz J.
|
SL2-12
Oral
|
Calculation of Process Capability before Series Production as Precondition for the Design of Multi Component Injection Moulded Parts
Heim H.-P.
|
SL2-11
Oral
|
Development of Products for Injection Moulding
Bujanic B., Sercer M., Godec D.
|
SL2-10
Oral
|
Fundamental Study on Structure Development of Thin-wall Injection Molded Products
Ito H., Yagisawa Y., Saito T., Yasuhara T., Kikutani T., Yamagiwa Y.
|
SL2-9
Oral
|
Characterisation of Surface Reproduction in Injection Moulding Process. Variation of Tool Steel, Surface Shaping, Coating, Polymer and Processing Parameters
Berger G.R., Friesenbichler W., Langecker G.R., Hoedl H.M.
|
SL2-8
Oral
|
Experimental and Numerical Study of Transcriptability of Micro Structures in Injection Molding
Lee J.G., Lee B.-K., Kwon T.H.
|
SL2-6
Oral
|
Visualization Analysis of Melt Flowing Behavior into Micro-scale Grooves during Cavity Filling Process in Injection Molding
Yokoi H., Han X.
|
SL2-17
Oral
|
Study on the Elongational and Shear Flow Behavior for the Bifurcation during Injection Molding
Washizaki T., Sugiyama K., Tubagus N.H.
|
SL2-4
Oral
|
A New Micro Injection Molding Machine
Juettner G., Jacob S., Krajewski P., Michaelis J., Blo§ P.
|
SL2-3
Oral
|
The Applications of Nano-materials in Micro Injection Molding
Huang C.K., Chiu S.W.
|
SL2-2
Oral
|
Molding of Thin Sheets Using Impact Micro-injection Molding
Nian S.C., Yang S.Y.
|
SL2-1
Oral
|
Injection Moulding of Micro Structures and Micro-structured Surfaces
Michaeli W., Gaertner R., Opfermann D.
|
SL2-7
Oral
|
Micro Assembly Injection Moulding - New Aspects in Manufacturing Hybrid Micro Systems
Michaeli W., Opfermann D.
|
SL2-25
Oral
|
High Performance Computation of Injection Molding on PC Clusters with Hybrid Element Flexibility
Yang W.-H., Peng A.Y., Liu L., Hsu D.C.
|
SL2-33
Oral
|
Ultrasound-assisted injection molding for improving mold filling and mechanical strength of flow lines
Vanicek W., Kazmirzak W., Krajewski P., Blo§ P.
|
SL2-32
Oral
|
Surface Glossy Difference on Water Assisted Injection Molded Thermoplastic Parts: Effects of Processing Variables
Liu S.-J., Chen W.-K.
|
SL2-31
Oral
|
Energy Savings by the Use of Gas Assisted Injection Moulding
Dawson A.J., Vinning K., Brookshaw B., Hendry J., Coates P.D.
|
SL2-30
Oral
|
Gas Assisted Moulding of an Automotive Handle: 3D Simulation and Experimental Verification
Polynkin A., Pittman J.F.T., Sienz J.
|
SL2-29
Oral
|
Processing-Structure-Properties Relationship in Core Back Overmolding of Polyolefins
Tchalamov D., Cunha A.M.
|
SL2-28
Oral
|
Numerical and Experimental Validation of Breakthrough Phenomena in Sandwich Injection Molding Process
Patcharaphun S., Mennig G.
|
SL2-15
Oral
|
Does the Fountain Flow Influence Molecular Orientation in Injection Molded Parts?
Nguyen-Chung T., Mennig G.
|
SL2-26
Oral
|
Numerical Simulation of Fiber Orientation in Injection Molding
Redjeb A., Silva L., Laure P., Vincent A., Coupez T.
|
SL2-16
Oral
|
Experimental Determination of the Polymer Flow Profiles in Injection Mould Channels
Bociaga E., Jaruga T., Sterzynski T., Banasiak A.
|
SL2-24
Oral
|
Injection Moulding of Smart Card Bodies
Proske R.
|
Not avalaible |
SL2-23
Oral
|
Water / Gas Assisted Injection Moulding: Comparison of Filling Simulation Results with the Instrumented Process
Mulvaney-Johnson L., Olley A., Coates P.D., Ilinca F., Hetu J.-F.
|
SL2-21
Oral
|
Sequential Injection Moulding - the Influence on Weld Lines
Kuehnert I., Stoll V., Mennig G.
|
SL2-20
Oral
|
Quantitative Study of Shrinkage and Warpage Behavior for Microcellular and Conventional Injection Molding
Kramschuster A., Cavitt R., Ermer D., Chen Z., Turng L.-S.
|
SL2-19
Oral
|
The Most Crucial Factors for the Warpage Prediction in Injection Molding
Jakobsen T.B., Henriksen S.H., Huang C.T., Peng Y.H.
|
SL2-18
Oral
|
Anisotropic Shrinkage in Injection Moldings of Amorphous and Semicrystalline Polymers: Simulation and Experiment
Isayev A.I., Kwon K., Kim K.H.
|
SL2-34
Oral
|
Investigation of the Influence of Processing Parameters of 2-Components Injection Molding on Adhesion at the Interface Thermoplastics-TPE
Lietz S., Wutzler A., Mueller W., Radusch H.-J.
|
SL2-27
Oral
|
Integrated Structure and Mold-Filling Simulation for Injection-Molded Plastic Parts
Peng A.Y., Yang W.-H., Hsu D.C.
|
PPS CONFERENCES PROCEEDINGS