| Name of Symposia: 15 - Foams, Novel Processes & Applications |
KL15-2
Keynote
|
Development of a Foamed Thermoplastic Substrate for Novel Printed Circuit Boards
Langenfelder D., Sandler J.K.W., Altstaedt V.
|
KL15-3
Keynote
|
Hot Embossing Microstructures onto Plastic Plates by Ultrasonic Vibration
Liu S.-J., Tung Y.-T.
|
KL15-1
Keynote
|
Numerical Simulation of Cell Nucleation in Polymer Foaming Using a Modified Classical Nucleation Theory
Leung S.N., Li H., Park C.B.
|
SL15-5
Oral
|
Rheological Properties and Foaming Behavior of Blends of Linear and Long-chain Branched Polypropylenes
Stange J., Muenstedt H.
|
SL15-11
Oral
|
Effect of Soft Segment Component on Moisture Permeable Polyurethane Films
Shibaya M., Suzuki Y., Doro M., Ishihara H., Yoshihara N., Enomoto M.
|
SL15-10
Oral
|
Foaming Flow Analysis with Reaction of Heat Generation for Polyurethane Resin
Kono T., Saeki J., Araki K., Iseki T., Matsuoka S.
|
SL15-9
Oral
|
Monitoring of Foam Formation by an Ultrasonic Reflection Technique
Xu J., Oehler H., Alig I.
|
SL15-8
Oral
|
Manufacture of Low-density, Fine-celled PBS Sheet Foams Blown with CO2 Using an Annular Die
Xu D., Park C.B., Fenton R.G.
|
SL15-13
Oral
|
Numerical Modeling of Contraction of Extruded Foam Sheet
Zhu Z., Xu D., Park C.B., Fenton R.G.
|
SL15-6
Oral
|
Stress and Strain-Induced Bubble Nucleation in Physical Foaming Process
Shikuma H., Ohshima M.
|
SL15-14
Oral
|
Foam Injection-moulding of Polymer Components with a Significant Density Reduction
Mantey A., Sandler J., Kunz D.
|
SL15-4
Oral
|
Microcellular Moulding with Gas Counter Pressure
Bledzki A.K., Kirschling H., Steinbichler G., Egger P.
|
SL15-3
Oral
|
The Progress of Microcellular Foam Injection Molding (MFIM) Technology
Ya-Dong H., Yi-Chong G.
|
SL15-2
Oral
|
Simulation and Experimental Study on Temperature and Pressure Release Rate Superposition Principle in Physical Polymeric Foaming
Ogawa H., Taki K., Muratani K., Shimbo M., Ohshima M.
|
SL15-1
Oral
|
Rheology Studies of the Solutions of Polyethylene with Chemical and Physical Blowing Agents in an Injection Molding Machine
Qin X., Thompson M.R., Hrymak A.N.
|
SL15-7
Oral
|
Equivalency of Foaming Temperature and Time about Cell Density of Foamed Polystyrene
Muratani K., Nakano S., Shimbo M.
|
SL15-21
Oral
|
Preparation EVA Nano Filtration Membrane by Thermal-wet Phase Inversion Process
Sadeghi M., Mousavi S.A., Motamed Hashemi M.Y., Ramezani A.
|
SL15-28
Oral
|
The Effect of Nd:YAG Laser Irradiation on the Adhesion Property of Dental Poly-ethylmetacrylate to Carbon Fiber
Nematollazadeh A., Mousavi S.S.A., Tilaki R.M., Ramazani A.
|
SL15-27
Oral
|
Selective Laser Sintering of High Temperature Resistant Thermoplastic Polymers
Woicke N., Wagner T., Eyerer P.
|
SL15-26
Oral
|
Novel Laser Welding Technique for Transparent Polymer Material using Photochromic-dye
Saito T., Satoh I.
|
SL15-25
Oral
|
A Melt Replication Process to Create Plastic Products with Precise Surface Micro Patterns and High Optical Transparency Applied to Display Parts and µ-TAS
Ito H., Yakemoto K., Kishida K., Shiroganeya T., Shigeishi T., Naitou A., Satoh I.
|
SL15-24
Oral
|
The Production and Use of a Novel Smart Material - "Smartform", in Manufacturing Applications
Blackburn D.R., Jamieson K.J.
|
SL15-12
Oral
|
Mechanical Properties of Polycaprolactone Porous Samples
Mas J., Vidaurre A., Meseguer J.M., Castilla I.
|
SL15-22
Oral
|
Processing Electrically Conductive Compounds Containing Low Melting Metals
Michaeli W., Pfefferkorn T.
|
SL15-29
Oral
|
Influence of Humidity and Configuration on the Durability of Phenolic Bounded Cut-Off Wheels
Stang C., Adasch V.
|
SL15-20
Oral
|
Optimization of an Established Joining Method: Vibration Welding
Kuriykov Y., Kuenkel R., Ehrenstein G.W.
|
SL15-19
Oral
|
The Mechanism in Ultrasonic Welding of PS Injection Molding
Hisamatsu T., Machiko M., Adachi K., Kuriyama T.
|
SL15-18
Oral
|
Prepatterning of Substrates via Diblock Copolymer Lithography
Zschech D., Kim D.H., Milenin A., Steinhart M., Goesele U.
|
Not avalaible |
SL15-17
Oral
|
3D-Deformation Models for Creep Behaviour of Polymer Foams
Kraatz A., Moneke M., Kolupaev V.
|
SL15-16
Oral
|
Effect of Weld Lines on the Mechanical Properties of Structural Polyethylene Foams
Leduc S., Rodrigue D.
|
SL15-15
Oral
|
Particle Foams - Ways to Improve the Product Quality
Kauffmann A., Eyerer P.
|
SL15-23
Oral
|
Thermal Analysis, RAMAN Spectroscopy and SEM of New Polymeric Material Containing In-Chain Ruthenium Complex: poly-{trans-[RuCl2(vpy)4]-co-styrene} and poly-{trans-[RuCl2(vpy)4] -4 vinylpyridine-styrene}
Franco C.V., da Silva Paula M.M., Goulart G., de Lima L.F.C.P., Noda L.K., Goncalves N.S.
|
PPS CONFERENCES PROCEEDINGS