| Name of Symposia: G10 - Modeling and simulation |
G10-338
Keynote
|
Multiscale simulation of polymer melt flow in a channel --- Analysis on states of well-entangled polymer chains ---
Takashi Taniguchi, Yuji Hamada, Takeshi Sato
|
Not avalaible |
G10-111
Keynote
|
Flow behavior of PP-polymer nanocomposites in injection molding hyperbolical dies
Evan Mitsoulis
|
Not avalaible |
G10-81
Keynote
|
Neural Netwok Learning for CAE Simulation
Wen-Ren Jong, Shia-Chun Chen, Yan-Mao Haung, Yun-Zih Lin
|
Not avalaible |
G10-349
Keynote
|
A full model for flow-induced, multi-phase, multi-morphological crystallization of isotactic polypropylene: application to inhomogeneous slit flow
Gerrit Peters, Patrick Anderson, Giovanna Grosso
|
Not avalaible |
G10-486
Oral
|
Buckling phenomenon in thin-walled injection molded parts
Przemysław Poszwa, Paweł Brzęk
|
Not avalaible |
G10-253
Oral
|
Application of Non-Matching Mesh in Injection Molding Simulation
Thomas Chiu, Cloud Tsai, Joii Huang, Chien-Hung Lin, Jing Wei, Kent Wang
|
G10-277
Oral
|
Computational Analysis of Transport across Flake-Filled Composites of Realistic Microstructure
Thanasis Papathanasiou, Andreas Tsiantis, Sholpan Sumbecova
|
G10-342
Oral
|
Achievements and Challenges of Predicting the Mechanical Performance of Weld Lines in Injection-molded Short Fiber-reinforced Thermoplastics
Camilo Cruz, Mohamed Besher Baradi, Gilles Régnier
|
Not avalaible |
G10-404
Oral
|
Analytical and Numerical Methods for Optimizing Screw Geometries of an Injection Molding Plasticizing Unit with Focus on Standard Three-Section Screws
Dominik Altmann, Thomas Köpplmayr, Georg Steinbichler
|
G10-414
Oral
|
Development of a new coupled viscoelastic solver in OpenFOAM®
C. Fernandes, V Vukčević, T Uroić, L Ferrás, O Carneiro, R Simões, H Jasak, J.Miguel Nobrega
|
Not avalaible |
G10-46
Oral
|
Knowledge-based Support for the Designer regarding Virtual Lifetime Prognosis of Elastomer Components
Rene Andrae, Simon Rocker, Robin Pluhnau, Arun Nagarajah, Reinhard Schiffers
|
Not avalaible |
G10-47
Oral
|
A Model to Describe the Transient Temperature Build Up During Dosing of a Rubber Injection Molding Machine
Roman Christopher Kerschbaumer, Walter Friesenbichler
|
G10-252
Oral
|
Numerical study and Shape Optimization of the Barrel to Nozzle Transition Region in an Injection Moulding Machine
Clemens Kastner
|
Not avalaible |
G10-484
Oral
|
Multi-chain Slip-spring Simulations for Entangled Polymers
Yuichi Masubuchi
|
Not avalaible |
G10-23
Oral
|
Increasing the thermal conductivity of polymer nanocomposites filled with carbon nanotubes via molecular dynamics simulation
Yangyang Gao, Liqun Zhang, Florian Müller-Plathe
|
Not avalaible |
G10-49
Oral
|
New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation
Frederik Sporkmann, Volker Schöppner
|
G10-68
Oral
|
Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders
Jan Klaus Trippe, Volker Schöppner
|
G10-8
Oral
|
Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates
Marius Wittke, Elmar Prof. Dr.-Ing. Moritzer, Gilmar Heiderich
|
G10-80
Oral
|
Modeling and Simulation of Magnetic Powder Injection Molding
DA SEUL SHIN, IM DOO JUNG, SEONG JIN PARK
|
Not avalaible |
G10-104
Oral
|
Calculation of the Drying Process of Hygroscopic Polymer Pellets in Desiccant Dryers and With Additional Microwave Application
Oliver Tim Kast, Christian Bonten
|
G10-147
Oral
|
Inter-Induction-Heating for Rapid Mold Temperature Control
Pi-Lin Tsai, Shia-Chung Chen, Kwan-cyun Liu, Tzu-Jeng Hsu, Chiu-Lan Yang
|
Not avalaible |
G10-174
Oral
|
A New Anisotropic Flow Simulation for Compression Molding of Glass-mat Thermoplastics
Anthony J. Favaloro, R. Byron Pipes, Huan-Chang Tseng
|
G10-488
Poster
|
Influence of fill imbalance on injection pressure drop during mold-filling stage
Przemysław Poszwa, Paweł Brzęk, Marek Szostak
|
Not avalaible |
G10-383
Poster
|
Steady-State Modeling of Industrial Slurry High-Density Polyethylene Processes
Din-Hsuan Hsieh, Wei-Han Cheng, Yi-Hsun Yu, Gow-Bin Wang
|
Not avalaible |
G10-203
Poster
|
Interface Analysis of Three-layer Co-extrusion Blown Film
Xiuqing Ma, Wenbin Zhai, Min Liu
|
G10-487
Poster
|
Analysis of shear heating effect in different grades of polymeric materials
Przemysław Poszwa, Paweł Brzęk, Marek Szostak
|
Not avalaible |
PPS CONFERENCES PROCEEDINGS