Name of Symposia: G01 - Injection Molding |
G01-443 Keynote
|
Injection molding with time modulation of mold surface temperature: analysis and modeling of pressure and temperature evolutions Vito Speranza, Sara Liparoti, Roberto Pantani, Giuseppe Titomanlio
|
G01-64 Keynote
|
An Overview Study of Microinjection Molded Polymer/Carbon Nanocomposites: The Effect of Filler and Matrix Type on the Electrical and Morphological Properties Shengtai Zhou, Andrew N. Hrymak, Musa R. Kamal
|
Not avalaible |
G01-479 Keynote
|
Visualization Analysis of Cascade Injection Molding Phenomena in Hot-runner System Hidetoshi Yokoi, Nobuyuki Takagi
|
G01-311 Keynote
|
Optimization of Packing Processing Parameters Based on PVT Path to Achieve High Precision Qualities for Injection Molded Parts Shia Chung Chen, Yung Hsiang Chang, Chiu Lan Yang
|
Not avalaible |
G01-227 Keynote
|
Micro Injection Molding of Polymer/Carbon Nanotubes Composites Process Properties Relationship Samuel Kenig, Zvi Dekel
|
Not avalaible |
G01-87 Keynote
|
Systematic analysis of the effects of moulding conditions on the properties of shape memory polymers Anna Halina Danielak , Aminul Islam
|
G01-321 Oral
|
Influence of rapid heat cycle injection molding on mechanical properties and microstructure of long glass fiber reinforced polypropylene Giovanni Lucchetta, Luca Crema, Marco Sorgato, Filippo Zanini, Simone Carmignato
|
Not avalaible |
G01-106 Oral
|
Weld Line Strength of Micro Injection Molded Tensile Rods Matthieu Fischer, Pascal Poehlmann, Maria Auf der Landwehr, Ines Kuehnert
|
Not avalaible |
G01-275 Oral
|
Injection Molding of Liquid Crystal Polymer on Al Plate with Anodic Aluminum Oxide Structure for Heterogeneous Bonding Wan-Hsuan Wu, Chao-Chang Arthur Chen, Chia-Wei Yu
|
G01-268 Oral
|
Flow behavior of thermosplastic resin in the barrel of injection molding Yuka Hirao, Tatsuya Tanaka, So Shimokusuzono
|
G01-202 Oral
|
Warpage Study on Viscoelasticity Effect Ashley Chang, Michael Su, Ethan Chiu
|
G01-153 Oral
|
Effects of mold surface coatings on thickness reduction in thin-wall injection molding Davide Masato, Leonardo Cazzaro, Marco Sorgato, Giovanni Lucchetta
|
Not avalaible |
G01-152 Oral
|
Slip of Polymer Melts Over Laser-Induced Periodic Nano-Structures in Injection Moulding Process Marco Sorgato, Davide Masato, Giovanni Lucchetta
|
Not avalaible |
G01-131 Oral
|
Study on the Main Driving Force to Cause the Variation of the Core Material Penetration Behavior in Different Materials Arranged Co-injection Molding Chao-Tsai Huang, Wei-Jie Tzeng, Cheng-Huang Chen, Gwo-Geng Lin, Chih-Chung Hsu, Rong-Yeu Chang, Shi-Chang Tseng
|
G01-120 Oral
|
Using injection molding simulation for the explanation of emerging two- and threedimensional surface structures of ABS and PC/ABS parts for electroplating- Reinhard Schiffers, Mirco Janßen, Jens Peter Siepmann, Johannes Wortberg, Felix Alexander Heinzler
|
G01-212 Oral
|
Strategies to preserve bio-based antimicrobial agents during extrusion and injection molding Matthias Bruchmüller, Andreas Juadjur, Janine Bauer, Michèle Biehl
|
G01-399 Oral
|
Study on Liquid Crystal Polymer Molding of Off-Axial Aspherical Reflective Grating Optical Element by Injection Molding Process Chia-Wei Yu, Chao-Chang Arthur Chen, Chang-Shun Lai, Li-Hong Wang
|
G01-341 Oral
|
Evaluation of Heating Performance and Its Impact on Surface Transcription by Rapid Heating Mold using Thin Electric Heater Takushi Saito, Hideki Hasegawa, Tatsuya Kawaguchi, Isao Satoh, Yutaka Shiraishi, Ken-ichi Zouta
|
G01-351 Oral
|
Establishment of new molding system for long fiber reinforced thermosetting resin Ken Fujisaki, Hirotaka Goto, Tatsuya Tanaka, Masatoshi Nakajima, Takao Maenaka, Akira Inoue, Masanori Okazaki
|
G01-371 Oral
|
Application of Conformal Cooling to Reduce Cooling Time and Warpage of a U-Shaped Plate S. C. Tseng
|
G01-377 Oral
|
Replication of nanosecond laser machined micro-features using ultrasonic injection moulding Mert Gulcur, Yukui Cai, Ben Whiteside, Xichun Luo
|
Not avalaible |
G01-65 Oral
|
Electrical and Morphological Properties of Microinjection Molded Polystyrene/Multi-walled Carbon Nanotubes/Carbon Black Nanocomposites Shengtai Zhou, Andrew N. Hrymak, Musa R. Kamal
|
Not avalaible |
G01-53 Oral
|
Study on the mechanism of the Surface Defect of the Ceramic Injection molded Insulator Feng-Jen Hsu, Chao-Tsai Huang, Richard Lee, Denni Liao
|
G01-12 Poster
|
Modeling and Optimization of Filling Imbalance in Geometrically Balanced Injection Molds Krzysztof Wilczyński, Przemysław Narowski
|
Not avalaible |
G01-67 Poster
|
Tie-bar elongation based quality control for injection molding Ming-Shyan Huang, Jian-Yu Chen, Shih-Chih Nian, Chien-Jou Tseng
|
Not avalaible |
G01-66 Poster
|
Effects of Mold Temperature and Laser Annealing on Short-Range Structure and Shrinkage of Injection Molded PMMA part Dong-Hung Tian, Han Yeh, Ren-Haw Chen
|
Not avalaible |
G01-151 Poster
|
Surface Treatment of Polymer-Polymer Composite by Plasma for Improved Interfacial Adhesion Markus Battisti, Oliver Jost, Homi Patel, Jan-Patrick Schulz, Markus Trojer
|
Not avalaible |
G01-157 Poster
|
The influence of magnetic fiber orientation on the electric properties of conductive polymer composite material by using magnetic-assisted injection molding Shia-Chung Chen, Chen-Yuan Chung, Ya-Lin Tseng
|
G01-330 Poster
|
Fast Manufacture of Microfeatured Plastic Diffusers Using IR-assisted Injection Molding KY Lin, SJ Liu
|
Not avalaible |
G01-462 Poster
|
Design of 10kW Horizontal Axis Wind Turbine Blades Assembled with Injection Molding Parts Ming-Tsung Sun, Shih-Wei Wang, Hu-Jiah Lee
|
Not avalaible |
G01-331 Poster
|
Manufacture of A Novel Biodegradable Polycaprolactone Fixator for Osteosynthesis Surgery of Rib Fracture Using Injection Molding Y.H. Yu, S.J. Liu
|
Not avalaible |
G01-388 Poster
|
Innovative design and simulation study of a mould for rapid temperature control in micro-injection moulding Annarita De Meo, Felice De Santis, Vito Speranza, Ben Whiteside, Phil Coates, Roberto Pantani
|
G01-231 Poster
|
Visual differences and microstructures of weld lines in injection-molded acrylonitrile butadiene styrene Yi-Jen Yang
|
Not avalaible |
G01-244 Poster
|
Increasing Flow Length in Multi-component Hybrid Molding Hyun-joong Lee, Nam-hoon Jang, Jin-woo Jung, Keun Park
|
Not avalaible |
G01-177 Poster
|
Intelligent Module Development for Balanced Filling in Injection Molding Yi-Jen Yang
|