Name of Symposia: G10 - Modeling and simulation |
G10-338 Keynote
|
Multiscale simulation of polymer melt flow in a channel --- Analysis on states of well-entangled polymer chains --- Takashi Taniguchi, Yuji Hamada, Takeshi Sato
|
Not avalaible |
G10-111 Keynote
|
Flow behavior of PP-polymer nanocomposites in injection molding hyperbolical dies Evan Mitsoulis
|
Not avalaible |
G10-81 Keynote
|
Neural Netwok Learning for CAE Simulation Wen-Ren Jong, Shia-Chun Chen, Yan-Mao Haung, Yun-Zih Lin
|
Not avalaible |
G10-349 Keynote
|
A full model for flow-induced, multi-phase, multi-morphological crystallization of isotactic polypropylene: application to inhomogeneous slit flow Gerrit Peters, Patrick Anderson, Giovanna Grosso
|
Not avalaible |
G10-486 Oral
|
Buckling phenomenon in thin-walled injection molded parts Przemysław Poszwa, Paweł Brzęk
|
Not avalaible |
G10-253 Oral
|
Application of Non-Matching Mesh in Injection Molding Simulation Thomas Chiu, Cloud Tsai, Joii Huang, Chien-Hung Lin, Jing Wei, Kent Wang
|
G10-277 Oral
|
Computational Analysis of Transport across Flake-Filled Composites of Realistic Microstructure Thanasis Papathanasiou, Andreas Tsiantis, Sholpan Sumbecova
|
G10-342 Oral
|
Achievements and Challenges of Predicting the Mechanical Performance of Weld Lines in Injection-molded Short Fiber-reinforced Thermoplastics Camilo Cruz, Mohamed Besher Baradi, Gilles Régnier
|
Not avalaible |
G10-404 Oral
|
Analytical and Numerical Methods for Optimizing Screw Geometries of an Injection Molding Plasticizing Unit with Focus on Standard Three-Section Screws Dominik Altmann, Thomas Köpplmayr, Georg Steinbichler
|
G10-414 Oral
|
Development of a new coupled viscoelastic solver in OpenFOAM® C. Fernandes, V Vukčević, T Uroić, L Ferrás, O Carneiro, R Simões, H Jasak, J.Miguel Nobrega
|
Not avalaible |
G10-46 Oral
|
Knowledge-based Support for the Designer regarding Virtual Lifetime Prognosis of Elastomer Components Rene Andrae, Simon Rocker, Robin Pluhnau, Arun Nagarajah, Reinhard Schiffers
|
Not avalaible |
G10-47 Oral
|
A Model to Describe the Transient Temperature Build Up During Dosing of a Rubber Injection Molding Machine Roman Christopher Kerschbaumer, Walter Friesenbichler
|
G10-252 Oral
|
Numerical study and Shape Optimization of the Barrel to Nozzle Transition Region in an Injection Moulding Machine Clemens Kastner
|
Not avalaible |
G10-484 Oral
|
Multi-chain Slip-spring Simulations for Entangled Polymers Yuichi Masubuchi
|
Not avalaible |
G10-23 Oral
|
Increasing the thermal conductivity of polymer nanocomposites filled with carbon nanotubes via molecular dynamics simulation Yangyang Gao, Liqun Zhang, Florian Müller-Plathe
|
Not avalaible |
G10-49 Oral
|
New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation Frederik Sporkmann, Volker Schöppner
|
G10-68 Oral
|
Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders Jan Klaus Trippe, Volker Schöppner
|
G10-8 Oral
|
Numerical Simulation of Residence Time, Shear Rates and Throughput in Single Screw Extruders Considering Wall Shear Rates Marius Wittke, Elmar Prof. Dr.-Ing. Moritzer, Gilmar Heiderich
|
G10-80 Oral
|
Modeling and Simulation of Magnetic Powder Injection Molding DA SEUL SHIN, IM DOO JUNG, SEONG JIN PARK
|
Not avalaible |
G10-104 Oral
|
Calculation of the Drying Process of Hygroscopic Polymer Pellets in Desiccant Dryers and With Additional Microwave Application Oliver Tim Kast, Christian Bonten
|
G10-147 Oral
|
Inter-Induction-Heating for Rapid Mold Temperature Control Pi-Lin Tsai, Shia-Chung Chen, Kwan-cyun Liu, Tzu-Jeng Hsu, Chiu-Lan Yang
|
Not avalaible |
G10-174 Oral
|
A New Anisotropic Flow Simulation for Compression Molding of Glass-mat Thermoplastics Anthony J. Favaloro, R. Byron Pipes, Huan-Chang Tseng
|
G10-488 Poster
|
Influence of fill imbalance on injection pressure drop during mold-filling stage Przemysław Poszwa, Paweł Brzęk, Marek Szostak
|
Not avalaible |
G10-383 Poster
|
Steady-State Modeling of Industrial Slurry High-Density Polyethylene Processes Din-Hsuan Hsieh, Wei-Han Cheng, Yi-Hsun Yu, Gow-Bin Wang
|
Not avalaible |
G10-203 Poster
|
Interface Analysis of Three-layer Co-extrusion Blown Film Xiuqing Ma, Wenbin Zhai, Min Liu
|
G10-487 Poster
|
Analysis of shear heating effect in different grades of polymeric materials Przemysław Poszwa, Paweł Brzęk, Marek Szostak
|
Not avalaible |