Name of Symposia: S19 - Additive technology |
S19-212 Keynote
|
3D printing of Custom Fabricated Textured Flexible Fiber Composites Ali Owais Anwer, Hui Ye, Hani E. Naguib
|
S19-414 Oral
|
Optimization of Freeforming process for amorphous and semi-crystalline thermoplastics Sebastien Charlon, Marie-France Lacrampe, Jérémie Jérémie Soulestin
|
Not avalaible |
S19-141 Oral
|
Tailoring properties of Additively Manufactured Parts Using Off-Axis Printing Natalie Rudolph, Luke van Hulle
|
Not avalaible |
S19-337 Oral
|
Experimental Studies on Liquid Additive Mixing in a Hyperbolic Die to Incorporate Liquids in Polymer Based Additive Manufacturing Aditya N Sangli, Marcelo Arispe-Guzman, Connor Armstrong, David Bigio
|
S19-176 Oral
|
Development of a new Polyamide 6 Material for Laser Sintering Process Andreas Wegner
|
S19-304 Oral
|
Strategies for Laser Sintering of PA12/polymer composites Dieter Strobbe, Peter Van Puyvelde, Jean-Pierre Kruth
|
Not avalaible |
S19-259 Oral
|
PLA and PLA composites for functional FDM products Claudia Pagano, Vito Basile, Francesco Giovanni Modica, Irene Fassi
|
S19-38 Oral
|
Generation of High performance Polyphenylene Sulfide-Thermotropic Liquid Crystalline Polymer Composite Filaments for Use in Fused Filament Fabrication Mubashir Q Ansari, Donald G Baird
|
S19-383 Oral
|
Prediction of Porosity Dissolution in SLS Process Hai-Bang LY, Eric MONTEIRO, Morgan DAL, Gilles REGNIER
|
Not avalaible |
S19-121 Oral
|
Maximisation of intra- and inter-layer strengths in parts produced by fused filament fabrication Martin Spoerk, Florian Arbeiter, Hrvoje Cajner, Janak Sapkota, Clemens Holzer
|
Not avalaible |
S19-397 Oral
|
Novel process routes towards the production of spherical polymer powders for selective laser sintering Jochen Schmidt, Maximilian A. Dechet, Juan S. Gómez Bonilla, Stephanie Kloos, Karl-Ernst Wirth, Wolfgang Peukert
|
S19-339 Oral
|
The effect of processing parameters on the dimensional characteristics of SLS parts Antonio J. Pontes, Andre Lima, Luis Freitas, Ana Sousa, Patricia Barros, Alvaro M. Sampaio
|
Not avalaible |
S19-224 Oral
|
Modification of polyamide powders and influence on their processability in Selective Laser Sintering David Ruggi
|
Not avalaible |
S19-452 Oral
|
Characterization of additive manufacturing processes for polymer micro parts productions using direct light processing (DLP) method Ali Davoudinejad, David Bue Pedersen, Guido Tosello
|
S19-208 Oral
|
Additive Manufacturing for Development of Polymeric Ron-Resch-Like Origami Structure for Damping Applications Mohamed Ali Emhmed Kshad, Hani E. Naguib
|
Not avalaible |
S19-508 Oral
|
Fiber Orientation Prediction for Short Fiber Composites Produced in Large Scale Additive Manufacturing Polymer Deposition Processes Zhaogui Wang, Douglas E. Smith
|
S19-185 Oral
|
3D printing with directionally thermally conductive composite materials by fused filament fabrication Tom Mulholland, Natalie Rudolph
|
Not avalaible |
S19-69 Oral
|
Silicone formulations for additive manufacturing Marie Crouillere
|
Not avalaible |
S19-239 Oral
|
Experimental setup for in situ visualization studies of laser sintering of polymer particles Prakhyat Hejmady, Ruth M Cardinaels, Lambert C. A. van Breemen, Patrick D Anderson
|
Not avalaible |
S19-126 Poster
|
Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication Joamin Gonzalez-Gutierrez, Christian Kukla, Florian Arbeiter, Clemens Holzer
|
Not avalaible |
S19-368 Poster
|
Assessing Selective Laser Melting in Extrusion Blow Molding Heinz Gross, Joăo Paulo Oliveira Vidal, Joao Miguel Nobrega
|
Not avalaible |
S19-8 Poster
|
An Integrated Biodegradable 3D-Printed Cage and Nanofibrous Drug-Eluting Membrane for Treating Metaphyseal Comminuted Fractures Shih-Jung Liu, Ying-Chao Chou
|
Not avalaible |
S19-396 Poster
|
Manufacturing of spherical micron-sized polymer particles for Additive Manufacturing via liquid-liquid phase separation Maximilian A. Dechet, Stephanie Kloos, Wolfgang Peukert, Jochen Schmidt
|
S19-425 Poster
|
3D Printed Silicon Rubber Cellular Architectures: Rheological Control, Structures and Properties Chengzhen Geng, Fengmei Yu, Ai Lu, Xiuli Zhao
|
Not avalaible |
S19-453 Poster
|
Surface roughness and geometrical process repeatability of additive manufacturing for precision injection moulding tool inserts production Ali Davoudinejad, Alessandro Charalambis, Guido Tosello , David Bue Pedersen
|
S19-484 Poster
|
Novel fused filament fabrication procedure and printhead to process thermoplastic elastomers Johannes Gattinger, Stefan Fischer
|
S19-55 Poster
|
Fundamental Investigations for a Combined Forming and Joining Process of Thermoplastic Composite Sheets and Additively Manufactured Structures Christian Hopmann, Markus Hildebrandt, Ruggero Giusti, Max Ophuels, Arne Boettcher, Kai Fischer, Giovanni Lucchetta
|
S19-358 Reject
|
Comparation of two methodologies to determine the cation exchange capacity on a Brazilian Sodium Bentonite Clay Lucas Gustavo Pelinson, Guilherme Guedes Rivas, Henderson Luiz Ferreira, Rondes Ferreira da Silva Torin, Anderson Maia
|
Not avalaible |