Name of Symposia: S13 - Rubber and elastomers |
S13-68 Keynote
|
Progress in multi-scaled structure and related properties of elastomer nanocomposites explored by molecular dynamics simulation and experimental approaches Liqun Zhang
|
Not avalaible |
S13-202 Keynote
|
Toward Replacement of Petroleum Oils by Modified Bio-based Oils in Elastomers Avraam I. Isayev, Jiaxi Li, Xiaofeng Ren, Mark D. Soucek
|
Not avalaible |
S13-247 Oral
|
Analysis of the axial temperature profile of differently stored rubber compounds in the screw antechamber during rubber injection molding Thomas Hutterer, Gerald R. Berger, Walter Friesenbichler
|
Not avalaible |
S13-190 Oral
|
Hard segment influented on dielectric properties of polyurethane based polycarbonate diol Hathaikarn Manuspiya
|
Not avalaible |
S13-198 Oral
|
An all atom molecular dynamic simulation and experimental study on damping properties of three neat hindered phenol /NBR systems Ruining YANG, Hua ZOU, Jing ZHU, Xiuying ZHAO, Sizhu WU
|
S13-210 Oral
|
Structure and Properties of Silicone Rubber/Styrene−Butadiene Rubber Composites with In-situ Interface Coupling by Thiol-ene Click Reaction Zheng Sun, Youping Wu, Qiang Huang, Liqun Zhang, Youzhi Wang
|
S13-226 Oral
|
A comparison of melt and solution mixing on the dispersion of carbon nanotubes in a styrene–Butadiene–styrene block copolymer João Santos, Guilherme Henrique França Melo, Andre Gonçalvez, José Eiras, Rosário Elida Suman Bretas
|
Not avalaible |
S13-10 Oral
|
Influence Of The Injection Molding Process On The Peeling Resistance Of Thermoplastic / Silicone Composites Christof Ulrich Schlitt
|
S13-110 Oral
|
Study on theInterphase of ElastomerNanocomposites by quantitative nanomechanical mapping (QNM) Technique of AFM ming tian, Guangyu Chu, Chunmeng Miao, Tong Mi, Yanyan Guo, Yuxing Feng, Yonglai Lu, Nanying Ning, Liqun Zhang
|
S13-123 Oral
|
Modified glass powder as filler in rubber mixtures Hans-Joachim Radusch, Melanie Keller, Andre Wutzler, Uwe Ferner, Hans-Jürgen Voss
|
S13-117 Oral
|
Preparation of EPDM seals with high hardness and low compression set used for PEM fuel cells through multilayered co-extrusion system Lichao Xia, Liyuan Shen, Hong Wu, Shaoyun Guo
|
Not avalaible |
S13-91 Oral
|
Multi-Component Injection Molding of Polycarbonate-LSR-Composites with Integrated Surface Activation Created by UVC Irradiation Michael Hartung, Ralf-Urs Giesen, Hans-Peter Heim
|
Not avalaible |
S13-261 Oral
|
High performance ZnO-graphene/chloroprene rubber composites Shipeng Wen, Zongchao Xu, Wencai Wang, Liqun Zhang, Li Liu
|
S13-279 Oral
|
Synthesis of Functionalized Carbon Quantum Dots and Their Cross-Linked Carboxy Nitrile Rubber Yue Dongmei
|
S13-32 Oral
|
The Path from the Rubber Strip to the Dosed Compound: A Way full of Challenges Roman Christopher Kerschbaumer, Bernhard Lechner, Georg Graninger, Walter Friesenbichler
|
Not avalaible |
S13-53 Oral
|
Results of Mullins Experiment to compare stress softening of different types of liquid silicone rubber Svenja Marl, Hans-Peter Heim, Ralf-Urs Giesen
|
S13-111 Oral
|
Preparation of Thermo-Reversible Elastomers by Catalyzed Ring-Opening and Diels-Alder Reaction via One-Step Melt Blending: Toward Industrialization Nanying Ning, Zhanbin Feng, Jing Hu, Hongchi Tian, Hongli Zuo, Liqun Zhang, Ming Tian
|
S13-30 Poster
|
Flow instabilities of silica filled SBR compounds Shinichiro Honda, Takanobu Kawamura, Toshio Tada
|
Not avalaible |
S13-31 Poster
|
Impact of the Filler Condition on Spatial Thermal Conductivity Fluctuations of an Injection Molded Rubber Part Roman Christopher Kerschbaumer, Bernhard Lechner, Daniel Tscharnuter, Andrea Wanner, Walter Friesenbichler
|
Not avalaible |
S13-504 Poster
|
Study on the Remove Protein from Natural Rubber Latex and Its Application Phan Trung Nghia, Trinh Thi Hang, Nghiem Thi Thuong, Nguyen Thu Ha, Yoshimasa Yamamot, Seiichi Kawahara
|
Not avalaible |