| Name of Symposia: S01 - Mixing and Compounding |
S01-87
Keynote
|
Toughening Improvement of Polyamide 6 with Low Molecular Weight Polyethylene
Akira Ishigami, Takuya Konno, Kazuki Watanabe, Shotaro Nishitsuji, Masaru Ishikawa, Hiroshi Ito
|
Not avalaible |
S01-219
Keynote
|
Analysis of the Process Behavior of Co-Kneaders
Johannes Rudloff, Matthias Wilhelm, Marieluise Lang, Peter Heidemeyer, Martin Bastian
|
S01-82
Keynote
|
New Screw Design Induced Extensional Flow for Enhancement of CNT Dispersion in PP Matrix through Twin-Screw Extruder.
Koki Matsumoto, Tatsuya Tanaka
|
Not avalaible |
S01-252
Keynote
|
Reactive Compatibilization Schemes for High Speed Twin Screw Extrusion of Polymer Blends
Margaret J Sobkowicz, Azadeh Farahanchi, Barbara Calderon
|
Not avalaible |
S01-439
Keynote
|
EFFECT OF BLENDING METHODS ON MECHANICAL PROPERTIES OF PS/TPU BLENDS
Mohamadreza Mansourieh, Azizeh Javadi
|
Not avalaible |
S01-154
Keynote
|
Preparation by melt compounding of composites reinforced by natural fibers: from breakage mechanisms to process optimization
Bruno VERGNES
|
Not avalaible |
S01-41
Oral
|
Melt homogenization in co-rotating twin-screw extruders: Design of a novel kneading disk
Velichko Hristov
|
Not avalaible |
S01-225
Oral
|
A Novel Experimental Setup for Characterization of Dispersive Mixing in Single-Screw Extruders
Oguz Celik, Christian Bonten
|
S01-20
Oral
|
Effect of surface modification on thermal properties of paraffin/copper oxide Nanocomposite
mohamadmahdi noori, hosseinali khonakdar, hamed azizi, mehdi ghaffari
|
S01-247
Oral
|
Upcycling contaminated post-industrial PP through compounding: a Design from Recycling case study.
Kim Ragaert, Sara Hubo, Laurens Delva, Maja Kuzmanovic, Lore Veelaert, Els Dubois
|
Not avalaible |
S01-195
Oral
|
Friction characteristics improvement of ABS for low squeaking noises generating interior automotive parts
Jareenuch Rojsatean, Patcharee Larpsuriyakul, Natcha Prakymoramas, Dumrong Thanomjitr, Sanya Kaewket, Thawatchai Singsom, Duangruthai Srinun
|
Not avalaible |
S01-19
Oral
|
Investigation of the temperature development within the solid conveying zone of twin-screw extruder based on the Discrete Element Method (DEM)
Kim Jacqueline Scharr, Volker Schöppner
|
Not avalaible |
S01-99
Oral
|
Modified polylactide with improved properties for extrusion foaming
Svenja Göttermann, Tobias Standau, Volker Altstädt, Christian Bonten
|
S01-298
Oral
|
Water assisted extrusion of PA/South African Bentonite nanocomposites: a process cost saving perspective
Vincent Omondi Ojijo, Suprakas Sinha Ray, Manfred Scriba
|
Not avalaible |
S01-299
Oral
|
Cardanol derivatives as effective plasticizers for polylactic acid
Antonio Greco, Francesca Ferrari
|
Not avalaible |
S01-343
Oral
|
Exfoliation of layered zirconium phosphate nanoplatelets by melt compounding
Lei Chen, Dazhi Sun, Jin Li
|
Not avalaible |
S01-209
Oral
|
INTERACTION BETWEEN COOLANT, POLYAMIDE 6.6, GLASS FIBERS AND ADDITIVES
Johannes Heyn, Christian Bonten, Silvia Kliem
|
S01-366
Oral
|
Glycerol as plasticizer in PVC
Ronald Assumpção Righetti, Clodoaldo Lazareti, Baltus Cornelius Bonse
|
Not avalaible |
S01-263
Oral
|
Mechanical properties of plasticized poly (lactic acid) with epoxydized soybean oil
Maryam Khaghanipour, Ali Badeli, Khosrow Khodabakhshi
|
Not avalaible |
S01-173
Oral
|
The Influence of Mixing Parameters on the Properties of Micron-sized Blast Furnace Slag Filled PP Compounds
Abdelhamid Mostafa, Gernot Pacher, Thomas Lucyshyn, Clemens Holzer, Helmut Flachberger, Bertram Frtiz
|
Not avalaible |
S01-170
Oral
|
Melt processing of cellulose nanofibrils and amphiphilic copolymer based bio-composites
Abhijit Venkatesh, Johannes Thunberg, Antal Boldizar
|
Not avalaible |
S01-48
Oral
|
Synergistic effect of fire retardant additives on fire behavior of cross-linkable polyolefin compounds toward intumescent compounds
Soraya Raboonpour, Shervin Ahmadi, Jalil Morshedian
|
Not avalaible |
S01-147
Oral
|
Influence of the screw configuration in a co-rotating twin screw extruder on the rheological and mechanical properties of a talc-reinforced polypropylene
Hans-Jürgen Luger, Thomas Unger, Erwin Mayrbäurl, Jürgen Miethlinger
|
Not avalaible |
S01-67
Oral
|
PBAT/Thermoplastic Starch Blend:“Concentration of OTPS & comparison with TPS”
BUSE NUR CAN, GURALP OZKOC
|
Not avalaible |
S01-139
Oral
|
Reactive Extrusion of PA6 - Different ways to increase the viscosity
Johannes Benz, Christian Bonten
|
S01-85
Oral
|
Compounding Anionic Polymerized Polyamide 6 Using Terephthalic Acid
Benjamino Rocco Formisano, Christian Bonten
|
S01-188
Poster
|
Saw dust reinforced toughened polypropylene (PP/EPDM/talc): effect of plasticizer incorporation
Gabriel Matheus Pinto, Baltus Cornelius Bonse
|
S01-206
Poster
|
A Study on the Optimization of Thermal Conductivity of HDPE Using Micro- and Nanoscale Fillers
Sebastian Stieger, Gerald Berger, Markus Battisti, Walter Friesenbichler
|
Not avalaible |
S01-24
Poster
|
Effect of ammonium and aminosilane montmorillonites organo-clays on the curing kinetics of unsaturated polyester (UP) resin nanocomposites
Maria Angeles Vargas
|
Not avalaible |
S01-11
Poster
|
Variations in rheological properties by melt reactive modification of PET
saeed Dolatshah, Amir Ershad Langroudi, Shervin Ahmadi
|
Not avalaible |
S01-297
Poster
|
Rheological and Mechanical Behavior of Polyethylene Filled with Estonian Oil Shale Heat Carrier Retorting Waste Ash.
Tiia-Maaja Suld
|
Not avalaible |
S01-405
Poster
|
Cross-Linked Polyethylene (XLPE) As Filler in High-Density Polyethylene: Effect of Content and Particle Size
Rodrigo Sousa Freitas, Baltus Cornelius Bonse
|
S01-410
Poster
|
Synthesis of MMA/GMA graft and random copolymers by melt and solution copolymerization
Amirhossein Karimi, Hamid Garmabi, Azizeh Javadi, Mostafa Ahmadi
|
Not avalaible |
S01-421
Poster
|
Analysis of dynamic oscillatory rheological properties of PP/EVA/organo-modified LDH ternary hybrids based on generalized Newtonian fluid and generalized linear viscoelastic approaches
hossein ali khonakdar sangdehi
|
Not avalaible |
S01-423
Poster
|
Thermal and Dynamic Mechanical Properties of PP/EVA Nanocomposites Containing Organo-Modified Layered Double Hydroxides
Hossein Ali Khonakdar sangedehi
|
Not avalaible |
S01-54
Poster
|
In situ ring-opening polymerization of laurolactam in presence of MWCNT toward Polyamide 12/MWCNT-nanocomposites
shervin ahmadi, Farzaneh Faridirad, Mohammad Barmar
|
Not avalaible |
S01-83
Poster
|
Recycling Cast Polyamide 6 Using a Lubricant
Benjamino Rocco Formisano, Christian Bonten
|
S01-261
Poster
|
Influence of modified and unmodified rice husk on mechanical properties of Poly (lactic acid)
Maryam Khaghanipour, Khosrow Khodabakhshi
|
Not avalaible |
PPS CONFERENCES PROCEEDINGS