| Name of Symposia: 15 - Thermal properties and heat transfer in processing |
KN-15-517
Keynote
|
Experimental validation of a thermal conductivity model for polymer composites with short glass fibers
Ronan Le Goff, Nicolas Boyard, D. Delaunay
|
KN-15-192
Keynote
|
Study of heat absorption in the thermoforming process for of transparent and filled polystyrene
Josef Friedrich Puehringer, Gernot Zitzenbacher, Christoph Spreitzer
|
OP-15-846
Oral
|
Simulation for a Drying Process of Solvent Cast Films Such as a TAC Film
Toshiro Yamada, Hiroko Nakamura, Kaoru Tada, Yongwon Kim
|
OP-15-1180
Oral
|
Thermal Conductivity of Polymers by Steady and Non Steady State Techniques
Wilson Santos
|
OP-15-1197
Oral
|
Anisotropic Thermal Conduction in Polymeric Materials
David Venerus, Jay Schieber, Sahil Gupta, Abhilesh Agarwal, David Nieto Simavilla, David Sun
|
Not avalaible |
OP-15-1339
Oral
|
Polymer Crystallization Data at Processing Relevant Cooling Rates for more Realistic Process Modeling
Christoph Schick, Evgeny Zhuravlev
|
OP-15-250
Oral
|
Micro-macro scale analysis of the structure and thermophysical characteristics of polymers
Nicolas Maillon, Lo Foulon, Sverine Goms, Mohamed Boutaous
|
OP-15-257
Oral
|
Thermal analysis of the polymer-mold interface in the injection molding process
Elotmani Rabie , Rousset Franois, Benhadid Hamda
|
OP-15-296
Oral
|
Thermal properties of polymers during solidification at processing relevant cooling rates.
Evgeny Zhuravlev, Christoph Schick, Andreas Wurm
|
OP-15-362
Oral
|
The effect of adding Polysilane on Heat Fusion Properties of various kinds of Polyethylene
Katsuhisa Tokumitsu, Masahiro Yamada, Kana Kobori, Mika Nakamura
|
OP-15-394
Oral
|
Reduced model for the determination of the cooling times of injected semi- crystalline polymers
Vincent Sobotka, Nicolas Boyard
|
Not avalaible |
OP-15-707
Oral
|
Interplay of Viscoelasticity and Inertia: Heat Transfer Asymptote in Laminar Tube Flow with Constant Boundary Heat Flux
Dennis Siginer, Mario Letelier
|
OP-15-921
Oral
|
Solving Part Warpagr for Injection Molding Under Asymmetry Mold Cooling Conditions
Shia Chung Chen, Yin Chang, Shih Tsun Huang
|
Not avalaible |
OP-15-666
Oral
|
Measurement of Thermal Properties of Rubbers During the Curing Process
Zied Cheheb, Pierre Mousseau, Alain Sarda, Rmi Deterre
|
Not avalaible |
P-15-990
Poster
|
Fabrication of rigid polyurethane solid plates with thermal-acoustical isolation properties by primary recycling from surfboard shaping process residues
Felipe A L Sanchez, Diego P Tarrago, Ruth M. Santana
|
P-15-1063
Poster
|
Thermographic Analysis in PU Tensile Test
Guillermo Mudry, Rudnei Palhano, Facundo Lopez, Telmo Strohaecker
|
Not avalaible |
P-15-108
Poster
|
Investigating of Polysulfide And epoxy-polysulfide copolymer Curing
Majid Abdouss, Tohid Farajpour
|
P-15-251
Poster
|
Efficiency and quality capability of discontinuous cooling techniques
Walter Michaeli, Christian Hopmann, Andreas Neuss, Silke Allert
|
P-15-255
Poster
|
One-step-production of superhydrophobic plastics surfaces
Walter Michaeli, Christian Hopmann, Andreas Neuss, Maximilian Sch ongart
|
P-15-475
Poster
|
Changes in thermal behaviour of aminoresins at storage
Kadri Siimer, Tiia-Maaja Suld, Tiit Kaljuvee, Peep Christjanson, Tonis Pehk
|
Not avalaible |
P-15-589
Poster
|
Natural Ageing of the Polypropylene: Morphological and Thermal Properties
Larissa S. Montagna, Ruth M. Santana
|
P-15-625
Poster
|
An innovative device to analyze heat transfers in Selective Infrared Sintering (SIS) and to improve modelling of the process
Amir Msakni, Mhamed Boutaous, Stephane Dupin, Claire Barres, Jean-Yves Charmeau
|
Not avalaible |
P-15-631
Poster
|
Effect of thermal annealing on the directional mechanical properties of extruded Poly Propylene sheets
Reza Mirabzadeh, Ehsan Soodmand, Amir Behshad
|
Not avalaible |
P-15-801
Poster
|
Viscous Dissipation of a Micelar Solution in an Oscillatory Pipe Flow
Edtson Emilio Herrera, Fausto Calderas, Guadalupe Sanchez-Olivares, Luis Medina-Torres, Octavio Manero
|
PPS CONFERENCES PROCEEDINGS