Name of Symposia: 6 - Injection Molding and Molds |
KN-6-160 Keynote
|
Visualization Analysis on Wrinkle Generation Phenomena Caused by Breaking-up of Solidified Layer during Cavity Filling Process Hidetoshi Yokoi, Yoshinori Kanetoh, Masakazu Ishida
|
KN-6-1058 Keynote
|
Modelling the injection moulding process up to final morphology Roberto Pantani, Andrea Sorrentino, Vito Speranza, Giuseppe Titomanlio
|
OP-6-183 Oral
|
Injection moulding rheometer for shear and elongational viscosity measurement Andrs Szcs, Lszl Halsz, Kroly Belina
|
OP-6-534 Oral
|
Local continuous fibre- reinforcement - Tailored Injection Moulding Timo Huber, Alexander Roch, Jan Diemert
|
OP-6-46 Oral
|
In-Mold Surface Modification and In-Mold Printing during Injection Molding Thomas Haertig, Guenther Mennig, Michael Gehde
|
OP-6-377 Oral
|
Fountain Flow Effect on Fiber Matrix Separation During Manufacturing of Short Fiber Filled Injection Molded Parts Natalie Rudolph, Ivn D. Lpez, Omar A. Estrada, Daniel Ramrez, Katharina Kurth, Hashim Al-Zain, Tim A. Osswald
|
OP-6-300 Oral
|
Modeling the interface temperature development and the resulting adhesion mechanisms at multi- component injection molding Rainer Kleeschulte, Elmar Moritzer
|
OP-6-284 Oral
|
On the effect of melt compression on mold filling Gerard Haagh, Han Slot, Markus Bulters
|
OP-6-229 Oral
|
Online quality management for injection moulding compounders Thomas Erb, Christian Bonten
|
OP-6-642 Oral
|
Three-dimensional Simulation of mold filling of viscoelastic fluids using fine volume method Bahareh Azinfar, Narjes Jafari Esfad, Ata Kamyabi, Mohammad Ghoroghi
|
OP-6-175 Oral
|
3D Simulation and experimental study in determining rheological properties for high speed injection molding process Chih-Chung Hsu, Chao- Tsai Huang, Hsien-Sen Chiu, Rong-Yeu Chang, Shia-Chung Chen
|
OP-6-162 Oral
|
Ultra-High-Magnification Visualization of Melt Filling Behaviors in Line & Space Replication Molding Using a Microscope Built-in Mold Hidetoshi Yokoi, Daisuke Yoshida
|
OP-6-1301 Oral
|
Improving the polymer surface quality by infrared radiation driven dynamic mold temperature control Gerald R. Berger, Susanne Roock, Josef Giessauf, Dieter P. Gruber, Walter Friesenbichler, Josef Steinbichler
|
OP-6-120 Oral
|
Quantitative method for characterizing flow mark in PP composites Hyun-Deung Shin, Jae-Gon Lim, Chun-Soo Lee, Soonho Lim
|
OP-6-1114 Oral
|
Development and validation of a physical model for the expansion injection molding process Walter Friesenbichler, Rajganesh Jegadeesan, Georg Steinbichler
|
OP-6-258 Oral
|
Hybrid multi-component injection molding for electro- and electronic applications Walter Michaeli, Christian Hopmann, Andreas Neuss, Johannes Wunderle
|
OP-6-879 Oral
|
Study on injection molding of Glass fiber reinforced polypropylene with fiber length and dispersion Kazuya Morita, Tatsuya Tanaka, Yutaka Imaida, Akira Inoue
|
Not avalaible |
OP-6-562 Oral
|
Mixer tests on MIM feedstock and blends with reground sprue to determine to the optimum mixture for the injection moulding process Bernd Jakob
|
OP-6-90 Oral
|
Investigation of Process Condition Effects on Optical Property in Injection Compression Molding Tzuchau Chen, Hsien-Sen Chiu, Yuan-Jung Chang, Ct Huang, Shi-Chang Tseng, Rong-Yeu Chang
|
OP-6-635 Oral
|
An innovative rapid thermal cycling system to improve the replication capability of injection-moulded microstructured surfaces Matteo Berton, Giovanni Lucchetta
|
Not avalaible |
OP-6-79 Oral
|
Warpage of Injection Molded In-Mold Labeling Parts Patcharee Larpsuriyakul, Hans-Gerhard Fritz
|
OP-6-780 Oral
|
Ultrasound for micromoulding characterisation Ben Whiteside, Elaine Brown, Cristina Tunea- Bobe, Phil Coates
|
OP-6-759 Oral
|
Solidification during the filling stage of injection molding: a simulation- oriented study Gianluca Mannella, Vincenzo La Carrubba, Valerio Brucato, Wim Zoetelief, Gerard Haagh
|
OP-6-746 Oral
|
Real-time Injection Moulding Product Mass Prediction Mohammad Umar, Leigh Mulvaney - Johnson, Phil Coates, Russell Speight
|
OP-6-65 Oral
|
Design and realization of a full-polymeric injection mouldable multifunctional microfluidic reactor Peter Neerincx
|
Not avalaible |
P-6-92 Poster
|
Properties of injection mouded parts made of recycled foam HDPE Elzbieta Bociaga, Pawel Palutkiewicz
|
P-6-1265 Poster
|
The Effects of Injection Molding Conditions on Dimensional Accuracy of Molded Plastic Parts Sukran Katmer, Cetin Karatas, H. Ibrahim Unal
|
Not avalaible |
P-6-1332 Poster
|
Weld Lines Strength in Injection Moulded Parts from Polyamide Composite Tomasz Jaruga, Damian Szymanski, Pawel Palutkiewicz
|
P-6-208 Poster
|
Simulations of Three Dimensional Fluid Penetrations for Water Assisted Injection Molded Parts Chih-Chung Hsu, Fu-Hung Hsu, Hsien-Sen Chiu, Rong-Yeu Chang
|
P-6-252 Poster
|
Process Development of the Projectile Injection Technique (PIT) Walter Michaeli, Christian Hopmann, Andreas Neuss, Moritz Grundler
|
P-6-680 Poster
|
Water Assisted Injection Molding process Parameters Optimization of Polypropylene by Experimental Design Overall Evaluation Criteria (OEC) Method Zahra Mohammadian, Taher Azdast, Ahmad Zia Ahmadzai, Amir Hosein Behravesh
|
P-6-91 Poster
|
Mechanical and Rheological Analysis of Polypropylene/Poly (Ethylene Oxide) Blends Filled with Hydroxy- modified nanoclays Abdulhadi Al-Juhani
|
P-6-1021 Poster
|
Structure and mechanical properties of polypropylene injection molded parts subjected to cyclic loading Elzbieta Bociaga, Monika Kula
|