| Name of Symposia: 3 - Polymer Nanocomposites |
KN-3-876
Keynote
|
Challenges and opportunities in design of nanocomposites of polyolefins
Sayantan Roy, Sadhan Jana
|
Not avalaible |
KN-3-1123
Keynote
|
State of dispersion of multiwall carbon nanotubes in melt-mixed co- continuous blends of polypropylene/acrylonitrile butadiene styrene
Arup R Bhattacharyya, Rupesh A Khare, Ajay S Panwar, Ajit R Kulkarni
|
KN-3-671
Keynote
|
In line and off line rheology of PP-clay Nanocomposites
Phil Coates, Atif Khan, Raj Patel, Hadj Benkreira
|
KN-3-578
Keynote
|
Study on Nanoclay Dispersion in a Polymer Nanocomposite by High- Resolution Electron Microscopy Combined with Electron Tomography
Suprakas Sinha Ray
|
KN-3-542
Keynote
|
Polymer/organoclay nanocomposites: processing
Rodrigue Matadi, Nadia Bahlouli, Kui Wang, Said Ahzi, Yves Rmond, Ren Muller
|
Not avalaible |
KN-3-50
Keynote
|
Supernucleation versus confinement in Polyethylene/carbon nanotubes nanocomposites obtained by in situ polymerization
Alejandro Mller
|
Not avalaible |
KN-3-480
Keynote
|
Influence of ball milling on the properties of multiwalled carbon nanotubes and their composites with polycarbonate
Beate Krause, Tobias Villmow, Mandy Mende, Gudrun Petzold, Petra Ptschke
|
Not avalaible |
KN-3-466
Keynote
|
Polymer Nano-composites: a new laboratory preparation using mixing and biaxial orientation to affect and control intercalation and exfoliation
Hadj Benkreira, Atif Khan, Phil Coates, Patel Raj
|
KN-3-425
Keynote
|
Polymeric nano-composite formation via solid-state processing
Tomotaka Saito, Masami Okamoto
|
KN-3-241
Keynote
|
Structure and properties of PVC and WPC nanocomposites with nanosilver
Jolanta Tomaszewska, Tomasz Sterzynski
|
Not avalaible |
KN-3-1334
Keynote
|
Effect of blending sequence on the microstructure and properties of PA6/ABS/Organoclay ternary nanocomposites
Amanda Oliveira, Nelson Larocca, Luiz Pessan
|
KN-3-1241
Keynote
|
Effect Of Organoclay On Morphology Development And Rheological Properties of Dynamically Vulcanized Nanocomposites based PP/EPDM/Organoclay
Davood Bagheri Asl, Fatemeh Safdari Shadloo, Hossein Nazockdast
|
KN-3-1233
Keynote
|
Enhanced Thermal Conductivity of Polymer Nanocomposites Filled with Graphene Sheets
Muhammad O Khan, Siu N. Leung, Ellen Chan, Hani Naguib, Francis Dawson
|
KN-3-477
Keynote
|
Process Design for Polyethylene-LDH- Nanocomposites
Andreas Leuteritz, Daniel Hung, Juliane Meinl, Bernd Kretzschmar
|
OP-3-302
Oral
|
Effect Of Organoclay On Morphology Development And Rheological Properties Of Dynamically Vulcanized Nanocomposites Based PP/EPDM/Organoclay
Davood Bagheri Asl, Fatemeh Safdari Shadloo, Hossein Nazockdast
|
OP-3-58
Oral
|
Thermal Properties of Thermoplastic Polyurethane nanocomposite
Clodoaldo Lazareti, Carlos Scuracchio
|
Not avalaible |
OP-3-518
Oral
|
Near-Infrared Spectroscopy for the on-Line Characterization of Nanocomposites
Joana Barbas, Ana Machado, Jose Covas
|
OP-3-505
Oral
|
Preparation and Characterization of PET- MMT/I Nanocomposites Through the Spray Drying Process
Paulo Rodrigo Alves, Antonio Jos Flix De, Luiz Antonio
|
Not avalaible |
OP-3-499
Oral
|
Ionic Liquids as Additives for Polymer Nanocomposites
Ricardo Keitel Donato, Henri Schrekker, Libor Matejka
|
OP-3-49
Oral
|
Dielectric Behavior of Polymer Nanocomposites Based on Poly(vinylidene difluoride)
Natthaphon Bunnak, Pitak Laoratanakul, Amar Bhalla, Hathaikarn Manuspiya
|
Not avalaible |
OP-3-470
Oral
|
Nucleation of isotactic polypropylene crystallization in multilayered sandwich nanocomposites by gold nanoparticles with different morphologies
Miroslav Slouf, Antonin Sikora, Helena Vlkova, Bojan Dimzoski, Tatana Vackova, Tomas Base
|
OP-3-393
Oral
|
Mechanical Performances and Morphology of Hdpe/Halloysite Nanocomposites: Effects of Matrix Fluidity and Nanofiller Organic Modification
Pietro Russo, Domenico Acierno, Paola Scarfato
|
OP-3-356
Oral
|
Creep-Recovery of Nanocomposites : An Innovative Method to Investigate the Dispersion of Nanoparticles in Polymers
Rose-Marie Gouttefarde, Felipe Wolff Fabris, Volker Altstdt
|
OP-3-301
Oral
|
Influence of processing conditions and induced shear work on the thermal, rheological and mechanical behavior of polymer nanocomposites
Hannelore Mattausch, Stephan Laske, Ivica Duretek, Clemens Holzer
|
OP-3-336
Oral
|
Investigation of Hybrid Nanofiller Systems in Polystyrene (PS/MWNTs/CuNW) using a Novel Solution Mixing Method
Joyce Chau Chau, Genaro Gelves, Uttandaraman Sundararaj
|
OP-3-580
Oral
|
The Study on Dispersed Nano-clay Morphology in Polymer Nanocomposites by Small-angle X-ray Scattering Combined with Electron Microscopy
Jayita Bandyopadhyay, Suprakas Sinha Ray
|
OP-3-702
Oral
|
Effect of Polarity of the Organoclay on the Morphology and Mechanical Properties of Poly (acrylonitrile-butadiene- styrene)/Poly (methyl methacrylate) Blends
Tayebe Nazari, Hmid Garmabi, Ahmad Arefazar
|
OP-3-343
Oral
|
Mechanical and thermal characterisation of biopolymer nanocomposites based on PLA/Nanographene platelets
Esmaeil Narmissa, Margaret Jollands, Nhol Kao, Rahul Gupta
|
OP-3-163
Oral
|
Effects of Multi-Walled Carbon Nanotubes (MWCNTs) on Perormance of Phosphorus Containing Flame Retrdants in Polypropylene
Hoda Azimi, Reza Jahanmardi, Mehdi Ghaffari
|
OP-3-993
Oral
|
Novel high performance heterogeneous nanocomposite proton exchange membrane based on poly(ether sulfone) with magnetic field-aligned g-Fe2O3 nanoparticles
Noushin Hassanabadi, S. Reza Ghaffarian Anbaran, Mohammad Mahdi Hasani Sadrabadi
|
Not avalaible |
OP-3-96
Oral
|
Influence of induced shear energy and residence time on material properties of polypropylene nanocomposites
Andreas Witschnigg, Stephan Laske, Ivica Duretek, Clemens Holzer
|
OP-3-799
Oral
|
Influence of the addition of nanoclays and conventional load in the properties of polymeric nanocomposites epoxy-based applied to powder coatings
Diego Piazza, Lisete Cristine Scienza, Ademir Jos Zattera
|
OP-3-783
Oral
|
Formation of PP/EPDM/Organoclay nanocomposites: Effect of processing conditions
Ramin Khosrokhavar, Ghasem Naderi, Gholamreza Bakhshandeh, Mir Hamid Reza Ghoreishy
|
OP-3-77
Oral
|
Chemical modified carbon nanotube-epoxy laminated woven carbon fiber fabric composites for use as a bipolar plate
Darunee Aussawasathien, Chanpen Teerawattananon
|
OP-3-679
Oral
|
Bi-component injection moulding of carbon nanofibre /polypropylene composites: morphology evaluation and correlation with mechanical and electrical properties
Carla Martins, Angelo Rodrigues, Eduarda Carvalho, Maria C. Paiva
|
Not avalaible |
OP-3-72
Oral
|
Silane-Grafting of Montmorillonite for Clay/FKM Nanocomposites
Maryam Khajehpour, Genaro Alberto Gelves, Uttandaraman Sundararaj
|
Not avalaible |
OP-3-602
Oral
|
microstructure of the PS / organoclay nanocomposites: injection molding versus uniaxial hot pressing
Pedro Lins, Ticiane Valera, Nicole Demarquette
|
Not avalaible |
OP-3-699
Oral
|
Investigation on Morphology and Mechanical Properties of Rubber-toughened Polyamide 66 Nanocomposites
Maryam Roshanali, Hamid Garmabi, Ahmad Arefazar
|
OP-3-277
Oral
|
Nanocomposites Based on TPU and Differently Modified Expanded Graphites: Electrical and Mechanical Properties and Microstructures Obtained by Different Processing Conditions
Jrgen Pionteck, Francesco Piana, Ulrich Schulze
|
Not avalaible |
OP-3-677
Oral
|
A comparative study of the dispersion of carbon nanotubes and nanofibres in polymer melts
Maria C. Paiva, Jose Covas, Rui M. Novais
|
OP-3-675
Oral
|
Process structuring of polymer nanocomposites
Phil Coates, Hadj Benkriera, Raj Patel, Eileen Harkin-Jones, Rund Abu- Zurayk, Atif Khan
|
OP-3-64
Oral
|
Interfacially Compatibilized RTV Silicone Rubber/Expanded Graphite Nanocomposite as a Conductive Pressure Sensor
Rezvan Soltani, Ali Asghar Katbab
|
OP-3-637
Oral
|
Study on polymer/clay nano composite compounding process under high shear stress and pressure conditions
Yasuyoshi Nakayasu, Tomoyuki Otoshi, Tatsuya Tanaka, Yutaka Imaida
|
Not avalaible |
OP-3-738
Oral
|
An Investigation on the effect of clay type and compatibilizer content on the barrier and mechanical properties of blow molded high density polyethylene based nanocomposites
Sirwe Abdollahi, Hamid Garmabi
|
OP-3-114
Oral
|
Thermal Behaviour of Polypropylene/Halloysite Nanotubes Nanocomposites: Water- Assisted Extrusion
Benoit Lecouvet, Michel Sclavons, Serge Bourbigot, Jacques Devaux, Christian Bailly
|
OP-3-1009
Oral
|
Impact of synergy between carbon nanotubes and carbon black on the rheological and electrical properties of an EPDM rubber
Maxime Charman, Frdric Lonardi, Cdric Bissuel, Christophe Derail
|
OP-3-1024
Oral
|
Effect of Organic montmorillonite, Talc and Fumed Silica Fillers on the Mechanical Properties and Thermal Properties of Polylactide Composites
Fengmei Yu
|
Not avalaible |
OP-3-1030
Oral
|
High Graphitic Content Carbon Nanocomposites
Amod Ogale, Byron Villacorta
|
Not avalaible |
OP-3-1051
Oral
|
Evaluation of flow induced nanoclay orientation in Polypropylene/ PP-g- MAH/organoclay by means of rheological and birefringence techniques
Shima Akbarpoursarabi, Hossein Nazockdast, Mahmood Masoomi
|
Not avalaible |
OP-3-1085
Oral
|
Study on Parameters Affecting the Morphology and Multi-Walled Carbon Nanotubes Partitioning in Polypropylene/Polyamide Based Blend Nanocomposites
Abbas Mazarei, Hossein Nazockdast, Bahram Dabir
|
OP-3-1096
Oral
|
Effect of the presence of functionalized graphene sheet on the phase separation of P?MSAN/PMMA blends
Giovanni Vleminckx, Suryasarathi Bose, Jan Leys, Michael Wbbenhorst, Chris Macosko, Paula Moldenaers
|
OP-3-1097
Oral
|
The Role of Flow-Induced Organoclay Orientation in Rheological Behavior and Crystallization Kinetics of Polyethylene/Clay Nanocomposite Films
Behzad Nazari Nasrabad, Hossein Nazockdast, Ali Asghar Katbab
|
OP-3-1100
Oral
|
Preparation and characterization of aluminium oxide/ poly(ethylene-co-butyl acrylate) nanocomposites
Patrica Nordell, Sohail Nawaz, Bruska Azhdar, Henrik Hillborg, Ulf Gedde
|
Not avalaible |
OP-3-1120
Oral
|
Role of specific interaction to achieve uniform dispersion of multiwall carbon nanotubes in multicomponent polymer blends
Arup R Bhattacharyya, Rupesh A Khare, Suryasarathi Bose, Ajit R Kulkarni
|
OP-3-1124
Oral
|
Shear-induced structure buildup in polymer-clay nanocomposites
Ruth Cardinaels, Yutian Zhu, Paula Moldenaers, Jan Mewis
|
OP-3-182
Oral
|
Influence of the degree of exfoliation on the heat conductivity of polypropylene nanocomposites
Stephan Laske, Ivica Duretek, Andreas Witschnigg, Clemens Holzer
|
OP-3-1139
Oral
|
Influence of the Dispersion Degree on the Mechanical Properties of Polyamide 6 Nanocomposites Films
Jrmie Soulestin, Sbastien Alix, Baralu Rashmi, Serge Bourbigot, Marie-France Lacrampe, Patricia Krawczak
|
OP-3-273
Oral
|
Functinalization of Carbon Nanotubes for CNT/PEEK composite fabrication
Moulay Rachid Babaa
|
OP-3-1145
Oral
|
Mechanical properties and abrasion wear resistance of PU/Al2O3 nanocomposites prepared by solution mixing
Reza Chegeni, Mona Mahboob Kanafi, Fathollah Moztarzadeh
|
Not avalaible |
OP-3-150
Oral
|
Study of the Viscoelastic Propertis of Polycarbonate/Acrylonitrile- Butadiene-Styrene Alloy Containing Triphenyl Phosphate and Nanoclay as Flame Retardant
Elham Feyz
|
Not avalaible |
OP-3-270
Oral
|
High thermal resistant nanodiamond based PP/EPDM thermoplastic olefin (TPO) nanocomposites
Fateme Hejazi Jahromi, Ali Asghar Katbab
|
OP-3-236
Oral
|
Inline-monitoring of the influence of the injection moulding conditions on the electrical conductivity of polymer-carbon nanotube composites
Ingo Alig, Dirk Lellinger, Donghua Xu, Alexander Ohneiser
|
Not avalaible |
OP-3-168
Oral
|
Effect of cellulosic nano- fibers on the conductivities of their conductive polymer composites
Shigeji Konagaya, Hiroaki Iriyama, Takeharu Oshio
|
OP-3-1125
Oral
|
Simple Approach to characterize the dispersion state of multiwalled carbon nanotubes in an epoxy matrix from rheology and electrical conductivity measurements
Maxime Pras
|
Not avalaible |
OP-3-157
Oral
|
PP Clay nanocomposites: degradation and stabilisation
Sahar Al-Malaika, H Sheena
|
OP-3-1146
Oral
|
Effect of Reactive Compatibilization on Clay Partitioning in PP/PS Blend Nanocomposites
Fatemeh Abbasi, Mir Karim Razavi Aghjeh, Akram Tavakoli
|
Not avalaible |
OP-3-134
Oral
|
Effect of Na-Montmorillonite slurry on mechanical and thermal properties of unsaturated polyester resin
Alejandro Rivera-Gonzaga, Antonio Sanchez-Solis, Octavio Manero
|
Not avalaible |
OP-3-130
Oral
|
Degradation effect of clay on burning behavior of poly(ethylene terephthalate )/ organo clay nanocomposites
Sima Habibi, Hossein Nazockdast, Abosaeed Rashidi, Saeed Bazgir
|
OP-3-1279
Oral
|
Crystal Transformation of PVDF in the Presence of Nanoclay and Multi-walled Carbon Nanotubes
Ali Akbar Yousefi
|
Not avalaible |
OP-3-1214
Oral
|
Preparation and Properties of Nano-Cellusose
Peter Hornsby
|
OP-3-1183
Oral
|
Morphology and mechanical properties of polylactide nanocomposite: A comparative study
Norazura Ibrahim, Margaret Jollands, Rajarathinam Parthasarathy
|
OP-3-1177
Oral
|
Evaluation of Oxygen and Water Vapor Permeability of LDPE/PA6/Clay Nanocomposite Films
Moslem Zhubin, Mahmood Mehrabzadeh, Jalil Morshedian
|
OP-3-1167
Oral
|
Studying interactions of modified clays on polypropylene by using different modifiers.
Jose Maria Alonso, Ileana Recalde, Miguel Ventura, Natalia Ortuo, Maria Jorda, Susana Aucejo
|
OP-3-1166
Oral
|
Development of novel packaging solutions based on PLA nanocomposites.
Maria Jorda, Jose Maria Alonso, Natalia Ortuo, Alejandro Devis, Miguel Ventura, Susana Aucejo
|
P-3-1043
Poster
|
Preparation and characterization of thermally stable polypropylene-heterocycle-exchanged montmorillonite nanocomposite
Hamid Ennajih, Rachid Bouhfid, El Mokhtar Essassi, Mostapha Bousmina
|
Not avalaible |
P-3-1049
Poster
|
The effects of alumina nanoparticle on the mechanical properties and abrasion wear resistance of polyurethane matrix
Amin Hooshafza, Fatollah Moztarzadeh, Mehdi Saboohi, Davood Bazregari, Mona Mahboob, Reza Chegeni
|
Not avalaible |
P-3-1050
Poster
|
Coating and Functionalization of Montmorillonite Nanoparticles for Improved Polymer Processing
Rainer Puchleitner, Gisbert Riess, Wolfgang Kern, Hannelore Mattausch, Stephan Laske
|
P-3-1068
Poster
|
Prediction of organoclay distribution in PA 6/EOR-g-MAH blend: The effect of different types of surfactant
Sepideh Gomari, Ismail Ghasemi, Mohammad Karrabi, Hamed Azizi
|
P-3-1071
Poster
|
Properties of PBT/Clay nanocomposite treated by electron-beam radiation
Everton Nascimento, Nelson Lima, Anne Chinellato, Francisco Valenzuela Diaz, Esperidiana Moura
|
Not avalaible |
P-3-1099
Poster
|
Mechanical properties and abrasion wear behavior of TiO2/Polyurethane nanocomposites prepared by solution blending
Mona Mahboob Kanafi, Reza Chegeni, Fathollah Moztarzadeh, Mehdi Barikani
|
Not avalaible |
P-3-663
Poster
|
Effect of an impact modifier and an organoclay on the processability and toughening of PLA
Gustavo De Figueiredo Brito, Pankaj Agrawal, Bartira Brandao Da Cunha, Edcleide Maria Araujo, Tomas Jefferson Alves De Melo
|
P-3-1073
Poster
|
Layered Silicates Controlled Rheology in Nylon 6-Clay Nano-Composite
Chihiro Mizuno, Masami Okamoto
|
P-3-712
Poster
|
Influence of Type Sufactante on Mechanical Properties of Nanocomposites HDPE/Clay National
Ariana Sa Dantas Wanderley Ariana, Sara Verusca De Oliveira Sara, Edcleide Maria Araujo Edcleide
|
Not avalaible |
P-3-711
Poster
|
Synthesis and Comparison between mechanical and thermal properties of two different TPU nanocomposite series
Mohammadreza Rahnama, Mehdi Barikani
|
P-3-710
Poster
|
Formulation of Monocomponent Epoxy Material for Microelectronic Coatings Applications
Rabi Ziraoui, Hafid Meghraoui, Said Fetouaki, Mustapha Elgouri, Hamza Tagmouti, Ahmed Elharfi
|
Not avalaible |
P-3-706
Poster
|
Influence of a Quaternary Ammonium Salt in the Organophilization an Bentonite Clay
Sara Verusca De Oliveira Sara, Geilza Alves Porto Geilza, Edcleide Maria Araujo Edcleide, Antonio Gilson Barbosa De Lima Gilson
|
Not avalaible |
P-3-701
Poster
|
Structural and Thermal Characterization of Nanocomposites HDPE/Clay National
Sara Verusca De Oliveira Sara, Ariana Sa Dantas Wanderley Ariana, Edcleide Maria Araujo Edcleide, Antonio Gilson Barbosa De Lima Gilson
|
Not avalaible |
P-3-684
Poster
|
Physical Properties of Highly Crystallized PET Reinforced with Multiwalled Carbon Nanotubes
Marco Aurilia, Luigi Sorrentino, Salvatore Iannace, Eva Milella
|
Not avalaible |
P-3-737
Poster
|
Evaluation of different processing conditions on the in-line turbidity and color formation of PP/MMT nanocomposites
Kelen C. Reis, Sebastiao V. Canevarolo
|
Not avalaible |
P-3-664
Poster
|
Polymeric Optical Fibers Produced with Polymethyl methacrylate/Laponite Nanocomposite
Evren Aslan Gurel, Lukas J. Scherer, Rene M. Rossi
|
Not avalaible |
P-3-740
Poster
|
Random Telegraph Noise In HDPE/MWCNT Composites Near Percolation Threshold
Heinz Christoph Neitzert, Olga Valentino, Maria Rosella Nobile, Maria Sarno, Paolo Ciambelli
|
P-3-661
Poster
|
Influence of The Organically Modified Clay Concentration on the Mechanical Properties and Morphology of Polypropylne/Clay Nanocomposites
Bartira Cunha, Gustavo Brito, Carlos Cunha, Pankaj Agrawal, Edcleide Araujo, Tomas Melo
|
Not avalaible |
P-3-620
Poster
|
Char effect of interlayer molecule in Polyolefin/LDH nanocomposites
Burak Kutlu, De-Yi Wang, Andreas Leuteritz, Udo Wagenknecht, Gert Heinrich
|
P-3-611
Poster
|
Influence of the Organically Modified Clay Concentration on the Mechanical Properties and Morphology of Polypropylene/Clay Nanocomposites
Bartira Cunha, Rodolfo Ferreira, Pankaj Agrawal, Edcleide Araujo, Tomas Melo
|
Not avalaible |
P-3-608
Poster
|
Influence of the preparation method on the thermal properties of PA6/copolymer/Organoclay nanocomposites
Pankaj Agrawal, Gustavo Brito, Carlos Cunha, Edcleide Araujo, Tomas Melo
|
Not avalaible |
P-3-601
Poster
|
Effect of functionalized MWCNT on the electrical and rheological properties of polycarbonate nanocomposites
Won Seok Choi, Sung Hun Ryu
|
Not avalaible |
P-3-565
Poster
|
Stress-Strain Behavior of NBR/PVC/Clay Nanocomposites: The effect of morphological structure on constitutive models
Elnaz Esmizadeh, Ghasem Naderi, Mir Hamid Reza Ghoreishy, Gholam Reza Bakhshandeh
|
P-3-540
Poster
|
Synergistic Effect of Polypropylene Clay Nanocomposites With a Phosphorus Intumescent Flame Retardant
Jair Fiori Jr., Rafael Dias, Claudia Sayer, Pedro Henrique Hermes De Araujo
|
Not avalaible |
P-3-529
Poster
|
Investigation of PVC nanocomposites prepared by melt blending
Daniel Ortiz Martins, Gerson Luiz Mantovani, Nelson Larocca, Talita Souza, Carlos Henrique Scuracchio
|
P-3-668
Poster
|
Vulcanization Behavior of NBR with Organically Modified Clay
Fabiula Sousa, Carlos Scuracchio
|
P-3-823
Poster
|
Effects of Organoclay on Cure Kinetics of the Vinyl Ester Resin
Shahin Akhlaghi, Mohammadreza Kalaee, Saeedeh Mazinani, Alireza Sharif
|
P-3-991
Poster
|
Preparation of Nanocomposites Based on BR/EPDM/Organoclay
Mehdi Kharazmkia, Ghasem Naderi, Mir Hamid Reza Ghoreishi
|
P-3-966
Poster
|
Melt processing of PP/PA-66/organoclay nanocomoposites and characterization by X-RAY Diffraction
Benalia Kouini, Aicha Serier
|
Not avalaible |
P-3-936
Poster
|
Dispersion effect on properties and morphology in PC/ABS-MWCNT nanocomposites obtained by extrusion
Marcin Wegrzyn, Enrique Gimenez
|
Not avalaible |
P-3-920
Poster
|
Effect of chemical bonding of nanoclay surface modifier and compatibilizer on the microstructure development and rheological peroperties of PP/PP-g-MA/ Diamine modified nanoclay
Gholamreza Pircheraghi, Hossein Nazockdast, Mohammadmehdi Salehi
|
Not avalaible |
P-3-899
Poster
|
A Study Of Material Based Clay: « Polyethylene low densite-Clay »
Dalila Smail
|
Not avalaible |
P-3-877
Poster
|
Strategies of reinforcement of silica and polymeric aerogels
Yannan Duan, Sadhan Jana
|
Not avalaible |
P-3-856
Poster
|
The Role of Organoclay on Microstructure Development and Rheological Properties of Poly(butylene terephtalate)/Epoxy/Organoclay Hybrid Systems
Mohammad Mahdi Salehi Barmi, Hossein Nazockdast, Gholamreza Pircheraghi
|
Not avalaible |
P-3-729
Poster
|
An investigation on interactions of nanoclay layers and polymeric chains using DMTA and SEM
Elnaz Esmizadeh, Ghasem Naderi, Mir Hamid Reza Ghoreishy, Gholam Reza Bakhshandeh
|
P-3-827
Poster
|
Study the Role of Nano-sized CaCO3 on the Cure Kinetic of Polyester/Epoxy Hybrid Coating
Shahin Akhlaghi, Mohammadreza Kalaee, Saeedeh Mazinani, Alireza Sharif, Ali Nouri, Mohsen Sadeghi
|
P-3-493
Poster
|
Study on Molecular Weight Growth through Emulsion Polymerization of Vinyl Chloride by Using Response Surface Methodology
Mohammad Rezaei
|
Not avalaible |
P-3-821
Poster
|
Correlating Morphology and Mechanical Properties of Vinyl Ester Resin/Montmorillonite Nanocomposites
Shahin Akhlaghi, Mohammadreza Kalaee, Saeedeh Mazinani, Alireza Sharif
|
P-3-804
Poster
|
Evaluation of Degradative Processes on Low Molar Mass PET/Organoclay Nanocomposites Prepared Via Melt Extrusion
Daniel Chiaretti, Manuela Kaneko, Sandra Cruz
|
Not avalaible |
P-3-802
Poster
|
A novel route to develop highly exfoliated polymer/organoclay nanocomposites using supercritical carbon dioxide assisted twin screw extrusion
Kwang Ho Jang, Kyoungmin Kim, Tae Yong Hwang, Youngjoon Ahn, Jae Wook Lee
|
Not avalaible |
P-3-797
Poster
|
Evaluation of Mechanical Properties PLA/PBAT/Brazilian Clay Obtained by Different Sequence of Mixture
Josiane Dantas, Vander Cassio, Edcleide Maria, Tomas Jefferson
|
P-3-794
Poster
|
Bionanocomposites based on poly(e-caprolactone) and titanium
Ana Machado, Ana Lima
|
Not avalaible |
P-3-786
Poster
|
Optimization Formulation of Nanocomposite Epoxy-Carbon Nanotube
Hafid Meghraoui
|
Not avalaible |
P-3-758
Poster
|
Investigation of Mechanical Properties of LDPELLDPENanoclay Hybrids Prepared with Water Injection Method in a Twin-Screw Extruder Using Pristine Clay
Seied Ismail Seied Shahabadi, Hamid Garmabi
|
Not avalaible |
P-3-750
Poster
|
Experimental and Analytical Study on High Velocity Impact of Nanocomposites Based on Glass Fiber/Polyester/Nanoclay
Reza Gashtil, Javad Moftakharian, Masoud Esfandeh, Alireza Sabet
|
P-3-853
Poster
|
Polypropylene–Montmorillonite Nanocomposites: Structural, Morphology and Mechanical Properties
Ana Morales, Lucilene Paiva, Daniela Zattarelli, Thiago Guimaraes
|
Not avalaible |
P-3-1194
Poster
|
Dispersion behaviour of MWCNT in the epoxy matrix and its influence on the mechanical properties of the resulting composites
Tejendra Gupta, Bhanu Pratap Singh
|
Not avalaible |
P-3-217
Poster
|
Influence of clay on the thermal properties of thermoplastic polyurethane nanocomposite
Clodoaldo Lazareti, Carlos Henrique Scuracchio, Gerson Luiz Mantovani
|
P-3-178
Poster
|
Dispersion behaviour of MWCNT in the epoxy matrix and its influence on the mechanical properties of the resulting composites
Tejendra Gupta, Bhanu Pratap Singh, Indresh Kumar Pandey
|
Not avalaible |
P-3-173
Poster
|
Dynamic Mechanical Analysis of Curaua/Glass Laminate Composites
Heitor Luiz Ornaghi Jr., Clarissa C. Angrizani, Ademir J Zattera, Sandro Campos Amico
|
P-3-171
Poster
|
Dynamic mechanical analysis of EVA/PVC/clay nanocomposites obtained using a twin-screw extruder
Aline Gelhen, Heitor Luiz Ornaghi Jr., Mara Zeni, Ademir J Zattera
|
P-3-139
Poster
|
Modification of polymer surface by imprinting technique of nanofibers
Anh Vu Doan, Howon Yoon, Masayuki Yamaguchi
|
P-3-1335
Poster
|
PS/PA6/PS-g-PA6 and Montmorillonite Clay Nanocomposites: Morphology and Rheological Properties.
Marina Magaton, Luis Antonio Pessan, Guo-Hua Hu
|
Not avalaible |
P-3-1297
Poster
|
The Performance of the PP/C15A Nanocomposites Produced in Different Extruders
Kelly Dos Santos, Raquel Mauler, Mauro Oviedo, Susana Liberman
|
P-3-521
Poster
|
Tribological Properties and Gear Strength of Various Carbon Fiber Filled PBT Composites
Yosuke Nishitani, Isamu Sekiguchi, Takeshi Kitano
|
P-3-1232
Poster
|
Thermoplastic Nanocomposites Based on Reduced Graphene Nanosheets
Mounir Elachaby, Rachid Aitbelale, Fatima Zahra Arrakiz, Abdelilah Benyoussef, Abou el kacem Qaiss, Mostapha Bousmina
|
Not avalaible |
P-3-303
Poster
|
The development of exfoliated nanoclay in PP matrix as sheath materials for temperature-regulating bicomponent fibers
Zengwei Guo, Bengt Hagstrom
|
Not avalaible |
P-3-1188
Poster
|
Preparation and characterization of silane grafted polypropylene clay nanocomposites
Heriarivelo Risite, Mostapha Bousmina, Omar Fassi Fehri, Khalil El Mabrouk
|
Not avalaible |
P-3-1186
Poster
|
Influence of MMT Content and the processing speed of the Morphological Properties of Nanocomposites Applied Powder Coating Epoxy Base
Diego Piazza, Ester S. Rieder, Lisete C. Scienza, Ademir J. Zattera
|
P-3-1170
Poster
|
Mechanical Performance and Barrier Properties of Ecobras/Bentonite Films
Ana Nery Mattos Costa, Arthur Rafael Albuquerque Araujo, Eduardo Luis Canedo, Laura Hecker De Carvalho
|
Not avalaible |
P-3-1169
Poster
|
Effect of Clay Purification and Organic Modification on The Mechanical and Barrier Properies of LLDPE/Bentonite Films
Eduardo Mello, Pamela Bento Cipriano, Arthur Rafael Albuquerque Araujo, Eduardo Luis Canedo, Laura Hecker De Carvalho
|
Not avalaible |
P-3-1131
Poster
|
Effect of different organic salts in the thermal stability of the organoclays
Rodholfo Da Silva Barbosa Ferreira, Danilo Siqueira Diniz, Itamara Farias Leite, S Maria De Lima Silva
|
P-3-1127
Poster
|
Polylactide-based nanocomposite films by melt compounding
Emilia Garofalo, Paola Scarfato, Luciano Di Maio, Loredana Incarnato
|
Not avalaible |
P-3-110
Poster
|
Effect of polypropylene oxide in the melt phase as a compatibilizer to improve the Practical Properties WPC composites from wood fibers - polypropylene - nano clay
Majid Abdouss, Hajar Rrisi, Saeed Kazemi Najafi
|
P-3-996
Poster
|
Preparation of Nanocomposites Poly( -caprolactone)/ cellulose nanofibers by In Situ Ring-Opening Polymerization
M. Lahcini, A. Boujmaaoui, M. Raihane, A. Carlmark Malkoch, E. Malmstrom Jonsson, H. Sehaqui
|
P-3-1295
Poster
|
Driving Polystyrene-coated-CNTs to the Interface of Immiscible Polymer Blends
Fangfang Tao, Anne-Christine Baudouin, Vuluga Daniela, Christoph Detrembleur, Christian Bailly
|
P-3-426
Poster
|
Elastomer nanocomposites based on
Ghasem Naderi, Hojatollah Vali
|
P-3-1077
Poster
|
Evaluation Of Permeability Of LDPE/PA6/Clay Nanocomposite Films
Moslem Zhubin, Mahmood Mehrabzadeh, Jalil Morshedian
|
P-3-492
Poster
|
Preparation, Characterization and Flammability of Polypropylene (PP)/Layered Double Hydroxide (LDH) Nanocomposites
De-Yi Wang, Andreas Leuteritz, Udo Wagenknecht, Gert Heinrich
|
Not avalaible |
P-3-490
Poster
|
Influence of screw configuration, residence time, and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites
Tobias Villmow, Bernd Kretzschmar, Petra Potschke
|
Not avalaible |
P-3-485
Poster
|
Effect of Polymer Content in The Membrane Preparation of Nanocomposite PA6
Amanda Melissa Damiao Leite, Rene Anisio Paz, Vanessa Da Nobrega Medeiros, Karine Castro Nobrega, Edcleide Maria Araujo, Helio De Lucena Lira, Luiz Antonio Pessan
|
P-3-484
Poster
|
The role of feeding conditions in twin-screw extrusion of PP/MWNT composites
Michael Thomas Muller, Beate Krause, Bernd Kretzschmar, Petra Potschke
|
Not avalaible |
P-3-483
Poster
|
Polyethylene LDH nanocomposites used in fiber spinning
Juliane Meinl, Andreas Leuteritz, Harald Brunig, Udo Wagenknecht, Gert Heinrich
|
Not avalaible |
P-3-482
Poster
|
LDH as versatile vulcanizing additive in rubber nanocomposites
Amit Das, Deyi Wang, Jino George, Andreas Leuteritz, Gert Heinrich
|
Not avalaible |
P-3-476
Poster
|
Influence of Feed Rate in the Preparation of Hybrid Polyamide 6/Bentonite Clay
Rene Anisio Paz, Edcleide Maria Araujo, Luiz Antonio Pessan, Tomas J. Alves Melo, Amanda Melissa D. Leite, Vanessa N. Medeiros
|
P-3-263
Poster
|
Development of Polymer/Inorganic Nanocomposites Processing based on an in-situ Non-aqueous Sol-Gel Technology
Walter Michaeli, Martin Muller, Christian Hopmann, Eike Kunker, Karin Peter, Christoph Kremer
|
P-3-454
Poster
|
Isotherm crystallisation of polypropylene - multiwall carbon nanotube composites
Andras Szucs, Andras Adamne Major, Karoly Belina
|
P-3-276
Poster
|
NR/SBR/Organoclay Nanocomposites: The Role of the Mooney Viscosity and Melt Elasticity in Melt Intercalation of Rubber Phases
Mitra Tavakoli, Ali Asghar Katbab, Hossein Nazockdast
|
P-3-411
Poster
|
Preparation, Mechanical Properties and Moisture Absorption of Urethane- Acrylate ( MODAR ) Resin/Clay Nanocomposites
Reza Gashtil, Masoud Esfandeh, Seyed Mojtaba Mirabedini, Amir Masood Rezadoust
|
P-3-383
Poster
|
Study of Structure and Rheological
Lynda Zaidi
|
Not avalaible |
P-3-380
Poster
|
Photo-stabilization of Polypropylene-Clay Nanocomposites : effect of Hindered Amine Light Stabilizers on durability
Naima Touati
|
Not avalaible |
P-3-379
Poster
|
Effects of Reprocessing on the Structure
Cherifa Remili
|
Not avalaible |
P-3-328
Poster
|
Effects of Epoxy-Polyester Hybrid and Nanoclay on Morphology, Rheological and Mechanical Properties of Styrene-Butadiene Rubber
M. Haghnegahdar, G. Naderi, G.R. Bakhshandeh
|
P-3-327
Poster
|
Polymer Nanocomposites Based On Butadiene Rubber/PCW/Nanoclay
Sepideh Zoghi, Gholam Reza Bakhshandeh, Ghasem Naderi, Morteza Ehsani
|
Not avalaible |
P-3-306
Poster
|
PA6/ Clay nano composite preparation containing nano Fibril morphology via insitu polymerization of ?- caprolactam in presence of nano clay
Shervin Ahmadi, Jalil Morshedian, Seyeed Ali Hashemi
|
Not avalaible |
P-3-494
Poster
|
Nanocomposite Membranes of Polyetherimide/National Clay for Gas Separation
Vanessa Da Nobrega Medeiros, Amanda Melissa Damiao Leite, Rene Anisio Da Paz, Larissa Fernandes Maia, Edcleide Maria Araujo, Luiz Antonio Pessan
|
Not avalaible |
P-3-464
Poster
|
The Effects of Mooney Viscosity and Melt Elasticity upon Microstructure and Dynamo- Mechanical Properties of EPDM-g-MA Compatibilized Natural Rubber/Organoclay Nanocomposites
Parisa Khoshnoud, Ali Asghar Katbab, Nima Mostofi
|
PPS CONFERENCES PROCEEDINGS