Name of Symposia: S11 - Molding Technology |
S11-208 Keynote
|
Fingering in Water Assisted Injection Molded Parts Shih-Jung Liu, Shih-Po Lin
|
Not avalaible |
S11-203 Oral
|
Effect of Cyclic Mould Temperature Control on the Performance of the Injection Moulding Process A L Kelly, P D Coates
|
Not avalaible |
S11-193 Oral
|
A comparative study of gas, water, cryogenically cooled gas and supercritical carbon dioxide in melt injection moulding L. Mulvaney-Johnson, M. Woodhead, M. Rose, A. Dawson, T. D. Gough, P. D. Coates, G.F. Smith, V. Goodship, Rui Magalhaes, Rob Hansell
|
Not avalaible |
S11-209 Oral
|
Flow Visualization of Filling with Aid of Colored Billets During Impact Micro-Injection Molding S. C. Nian, S. Y. Yang
|
Not avalaible |
S11-207 Oral
|
Experiments and Simulation of Injection Molding with Microfeatures Liyong Yu, Guojun Xu, L. James Lee, Kurt W. Koelling
|
Not avalaible |
S11-206 Oral
|
Experimental Study of Fiber Orientation of EMI Polymer Composites using Injection Barrel with Removable Mechanisms Chao-Chang A. Chen, Yi-Chung Tsai
|
Not avalaible |
S11-212 Oral
|
IMPROVED FIBER ORIENTATION PREDICTIONS FOR INJECTION-MOLDED COMPOSITES Jin Wang, Charles L. Tucker III
|
Not avalaible |
S11-204 Oral
|
Effect of molding conditions in the properties of PP/PP sandwich injection molding T. Nagaoka, U.S. Ishiaku, T. Tomari, H. Hamada, S. Takashima
|
Not avalaible |
S11-213 Oral
|
Injection Molding of Si-Mold Insert with Miniature Grooves Chao-Chang A. Chen, Zhi-Feng Lin, Tzu-Chien Huang, Y. K. Shen
|
Not avalaible |
S11-202 Oral
|
Evaluation of powder injection molding feedstocks using different test geometries Hélio R. Jorge, António M. Correia, António M. Cunha
|
Not avalaible |
S11-200 Oral
|
Anisotropic Shrinkage in Injection Moldings of Amorphous Thermoplastic Polymers: Simulation and Experiment Keehae Kwon, A. I. Isayev, Kyuk Hyun Kim
|
Not avalaible |
S11-198 Oral
|
ACTIVE SHEARING FOR DIMENSIONAL STABILITY ENHANCEMENT OF REINFORCED AND NON-REINFORCED INJECTION MOLDED POLYPROPYLENE C. A. Silva, J.C. Viana, A. M. Cunha
|
Not avalaible |
S11-196 Oral
|
A Study on Flow-mark Generation Mechanism of Filler Filled PP Plates Takushi Saito, Isao Satoh, Yoshiaki Togawa
|
Not avalaible |
S11-195 Oral
|
A NOVEL MICROCELLULAR CO-INJECTION MOLDING PROCESS Lih-Sheng Turng, Hrishikesh Kharbas
|
Not avalaible |
S11-194 Oral
|
A Novel Guiding Mechanism of Micro Core Pins in the Micro Injection Molding of High-Aspect-Ratio Optical Fiber Ferrules Zheng-Guan. Lin, Shi-Chang Tseng, James Wang, Yi-Chung Su
|
Not avalaible |
S11-205 Oral
|
EFFECTS OF INJECTION SPEED ON INTERNAL STRUCTURE OF MOLDINGS IN ULTRA-HIGH SPEED INJECTION Machiko Mizoguchi, Satoko Baba, Susumu Takashima, Hiroyuki Hamada
|
Not avalaible |
S11-218 Oral
|
Production and Use of Micropellets for Rotational Molding Elizabeth Soos Takács, John Vlachopoulos, Claude Y. F. Xi, Michael R. Thompson, Mark Tate
|
Not avalaible |
S11-219 Oral
|
Real Time Flow rate Estimation in Injection Molding Bingfeng Fan, David Kazmer, Ranjan Mukhari
|
Not avalaible |
S11-221 Oral
|
The Effect of Injection Pressure on Specific Volume and Course of Pressure in Mold Cavity of Low Density Polyethylene BEATA KOWALSKA
|
Not avalaible |
S11-224 Oral
|
Theoretical and Experimental Study on Flash Generation of Poly(phenylene sulfide)/Glass Fiber Composite H. Higuchi, H. Goto, K. Koyama
|
Not avalaible |
S11-225 Oral
|
Ultra-thin-walled Sandwich Molding Realized by Ultra-high Speed Co-injection Molding Technology and Cascade Hot-runner System Hidetoshi Yokoi, Guoying Su
|
Not avalaible |
S11-211 Oral
|
Gas-vent Effect on LCP Molded Parts in Ultra High-speed Injection Molding Shigeru HASEGAWA, Hidetoshi YOKOI
|
Not avalaible |
S11-199 Poster
|
Analysis of droplet coalescence in post-processing stages: Time scales analysis in the flow through runners and strip molds Jairo E. Perilla, Sadhan C. Jana
|
Not avalaible |
S11-223 Poster
|
The Influence of Mold Temperature on Morphology and Thermodynamic Equation of State of Polypropylene Elzbieta Bociaga, Beata Kowalska, Bronislaw Samujlo
|
Not avalaible |
S11-222 Poster
|
THE EFFECT OF MOLDING CONDITION ON INTERFACIAL MECHANICAL AND MORPHOLOGICAL PROPERTIES OF FILM INSERT INJECTION MOLDED PP-FILM/PP MATRIX S. Yamaguchi, Y. W. Leong, M. Mizoguchi, H. Hamada, U. S. Ishiaku, T. Tsujii
|
Not avalaible |
S11-220 Poster
|
SANDWICH VS. MONOSANDWICH MOLDING – PROCESSING-STRUCTURE-PROPERTIES RELATIONSHIPS Dimitre Tchalamov, António M. Cunha
|
Not avalaible |
S11-217 Poster
|
Process of Cavity Filling in a Multicavity Injection Mold E. Bociaga, T. Jaruga
|
Not avalaible |
S11-216 Poster
|
Mold Cooling Effects on Injection Molding of Miniature Grooves Chao-Chang A. Chen, Huang-Chang Chen, Zhi-Feng Lin, Y. K. Shen
|
Not avalaible |
S11-210 Poster
|
Fluid Assisted Polymer Processing in Extrusion and Injection Moulding: A Comparative Overview L. Mulvaney-Johnson, M. Woodhead, M. Rose, A. Dawson, T. D. Gough, P. D. Coates, G.F. Smith, V. Goodship, Rui Magalhaes, Rob Hansell
|
Not avalaible |
S11-226 Poster
|
Void Shape in Channels of Water Assisted Injection Molded Parts Shih-Jung Liu, Ku-Ming Chen
|
Not avalaible |
S11-197 Poster
|
Acceleration effects in polymer flow Bingfeng Fan, David Kazmer, Dheeraj Gupta
|
Not avalaible |
Not avalaible |
S11-214 Poster
|
MECHANICAL PROPERTIES OF ULTRA HIGH SPEED INJECTION SANDWICH MOLDED PARTS Hiroyuki Hamada, Machiko Mizoguchi, Susumu Takashima, Satoko Baba, Shigeyuki Nagata
|
Not avalaible |