| Name of Symposia: S05 - Reactive Processing/Foams |
S05-1045
Keynote
|
EXTRUDED OPEN-CELLED LDPE-BASED FOAMS USING NON-HOMOGENEOUS MELT STRUCTURE
Pravakar Mondal, D. V. Khakhar
|
Not avalaible |
S05-383
Keynote
|
Reactive Extrusion of PP for Long Chain Branching
Jiong Shen, L. James Lee
|
Not avalaible |
S05-388
Oral
|
Chain Extension Reaction of PA1010 by 2,2_-Bis(2-oxazoline)
M. C. Branciforti, R. Pimentel, R. E. S. Bretas
|
S05-40
Oral
|
Morphological Properties of Polyethylene-Kevlar Composite Foams
A. Reyna, M. Bousmina
|
S05-60
Oral
|
Crosslinking of a thermoset into a thermoplastic matrix: morphologies obtained under quiescent and dynamic conditions.
J. Spirgatis, J. Wortberg
|
S05-75
Oral
|
Morphology Development Of Dynamically Vulcanized Thermoplastic Elastomers Based on PP/EPDM in a Co-rotating Twin Screw Extruder
Sungho Lee, Myung-Soo Kim+, Amod A. Ogale
|
S05-161
Oral
|
REACTIVE ROTATIONAL MOULDING _ DEVELOPMENT OF A FEED SYSTEM FOR USE WITH THE MULTIPLE SHOT MOULDING TECHNIQUE
Musa R. Kamal & Iyad A. Muslet
|
S05-244
Oral
|
Control factors of foam structure and properties in microcellular injection molding
E.Gamache, J-F. Agassant, Y. Demay, P.G. Lafleur.
|
S05-253
Oral
|
In-situ Observation on Foaming of Molten Polypropylene by Supercritical Carbon Dioxide
A. A. Khan, S. N. Bhattacharya
|
S05-258
Oral
|
Solubility and diffusivity of supercritical carbon dioxide (sc-CO2) in molten PP/EPDM blends
C. Groß, J. Wortberg;
|
S05-269
Oral
|
Visual Observation of Physical Batch Foaming for Polymer Blends and Composites
H.Uehara, K.Sakauchi, T.Kanai, T.Yamada
|
S05-329
Oral
|
COMBINED FOAMING AND ROTOMOULDING : THE ROTOFOAM PROCESS
Milind V. Mhalgi, Devang V. Khakhar, Ashok Misra
|
S05-352
Oral
|
Foaming of Novel Linear Polyethylene with Enhanced Melt Elasticity
Bronislaw Samujlo
|
S05-8
Oral
|
Chemical Surface Modification of Polycarbonate at Injection Molding - Process and Surface Characterization
Kiyohito KOYAMA, Akitomo SATO, Masataka SUGIMOTO, Takashi TANIGUCHI, Hideaki ISHIHARA
|
S05-386
Oral
|
Effect of crystallinity on microcellular foaming in crystalline polymer
CARL L. ARONSON, JOHN C. CATALOGNA, WILLIAM D. WEBSTER
|
S05-1045
Oral
|
EXTRUDED OPEN-CELLED LDPE-BASED FOAMS USING NON-HOMOGENEOUS MELT STRUCTURE
Fumio Shibuya, Hiroshi Ito, Kyoung Hou Kim, Hyun Hok Cho, Takeshi Kikutani
|
S05-1058
Oral
|
Effect of Recycling on the MW, Rheological Properties, and Foaming Behaviors of Branched PP
Fumio Shibuya, Hiroshi Ito, Kyoung Hou Kim, Hyun Hok Cho, Takeshi Kikutani
|
S05-1062
Oral
|
A Study on the Batch Foaming of Biodegradable Polymer
Toshiro YAMADA, Takayuki IWASAKI, Genki SUGIHARA, Masami ASANUMA, Hideki TOYA, Atsushi YOKOYAMA, Moritaka FUKUNAGA
|
S05-1069
Oral
|
Polypropylene Characteristics in Extrusion Foaming Process at Low Pressure
Kouei Nitta, Kentaro Taki, Shin-ichi Kihara, Masahiro Ohshima
|
S05-383
Oral
|
Reactive Extrusion of PP for Long Chain Branching
M. Shahvazyian, H. Nazockdast, H. Mousavipour, S. Rashidi
|
Not avalaible |
S05-1060
Poster
|
Extrusion Foaming of High Melt Strength Polypropylene
Christopher Stephen, Rahul Gupta, Sati N. Bhattacharya, H Lau
|
S05-41
Poster
|
The influence of injection molding conditions and polymer composition on skin thickness and flexural properties of HDPE structural foams
Denis Rodrigue, Simon Leduc
|
S05-353
Poster
|
Enhancement of Strain-Hardening in Elongational Viscosity for Linear Polymers
Masyauki Yamaguchi
|
S05-402
Poster
|
The Relationship among Branching Factor, Rheological Properties and Processability of Branched Poly(butylene succinate-co-butylene adipate)
Mitsuhiro Imaizumi, Yoshiro Okino, Masaoki Takahashi, Katsuyuki Yoshikawa
|
S05-406
Poster
|
A Study on Recycling of Expanded Polystyrene (EPS) Bead-box for Marine Products
Takefumi Nagata, Kenji Yokota, Eiichi Saito, Mitsuhiro Imaizumi
|
PPS CONFERENCES PROCEEDINGS