Name of Symposia: G01 - Injection molding |
G01-358 Keynote
|
Process induced morphology - Special insights and examples Ines Kuehnert, Yvonne Spoerer, Reinhard Fechter
|
Not avalaible |
G01-419 Keynote
|
Influence of Screw Design on Fiber Breakage of Glass Fiber Reinforced Polypropylene in the Injection Molding Process Franziska Bürenhaus, Elmar Moritzer
|
G01-199 Keynote
|
Investigation of in-mold rheology for process control of recycled polyolefins Joshua Krantz
|
Not avalaible |
G01-204 Keynote
|
Evaluation of metal-polymer direct joining by measurement of local stiffness of interface Fuminobu Kimura, Yusuke Kajihara
|
Not avalaible |
G01-228 Oral
|
Virtual quality measurement of injection molded products with artificial intelligence technology Kun-Cheng Ke, Ming-Shyan Huang
|
G01-298 Oral
|
Injection molding process induced morphology memory effect of polyether ether ketone Moritz Kurkowski, Yvonne Spörer, Ines Kühnert, Markus Stommel
|
Not avalaible |
G01-27 Oral
|
Verification of fiber orientation mechanism by resin flow behavior after flow front confluence Shogo Ogura, Masahiro Seto, Masashi Yamabe
|
G01-263 Oral
|
Visualization Analysis of Plastication Process with Different Screw Configurations under High Screw Rotation Speed Michihiro Tatsuno, Hidetoshi Yokoi
|
Not avalaible |
G01-261 Oral
|
Visualization Analysis of Wrinkle Generation Phenomenon of PP Decorative Sheets Kaname Kondo, Michihiro Tatsuno, Hidetoshi Yokoi
|
Not avalaible |
G01-103 Oral
|
Morphology evolution during polymer processing of thermoplastic polymers Vito Speranza, Sara Liparoti, Giuseppe Titomanlio, Roberto Pantani
|
Not avalaible |
G01-244 Oral
|
Preparation of Thermally Conductive Yet Electrically Insulative Polycarbonate Composites by Constructing Hybrid Filler Network Assisted by High Shear Injection Molding Process Yang Bai, Shengtai Zhou, Mei Liang, Huawei Zou
|
Not avalaible |
G01-349 Oral
|
Wetting Functionalization of Polymer Surfaces via Hierarchical Ultrafast Laser Texturing of Injection Mold Surfaces Ian Christopher MacKay
|
Not avalaible |
G01-19 Oral
|
Analysis of the blowing behavior of semi-crystalline plastics in the two-stage GITBlow process Michael Kröker, Elmar Moritzer
|
G01-186 Oral
|
Effect of Velocity-controlled and Pressure-controlled Filling on the Morphology Evolution and Performances of Semi-crystalline Injection Molded Parts Peng Gao, Joshua Krantz, Olivia Ferki, Margaret Sobkowicz-Kline, Davide Masato, Faisal Alzahrani, John Coulter
|
Not avalaible |
G01-184 Oral
|
Investigation of the influence of surface pretreatment on the interfacial adhesion of thermoset-metal-composites produced in the injection molding process Nils Schmeißer, Michael Gehde
|
G01-12 Oral
|
Loss of Steel Hardness in Injection Molding: Phenomenon -Analysis of Temperature, Polymer and Steel David Zidar, Andreas Landefeld, Boris Gschöpf, Ronald Schnitzer, Horst Zunko, Walter Friesenbichler
|
Not avalaible |
G01-105 Oral
|
Joining strength dependence on hot water treated surface textures of galvanized steel in injection molded direct joining Weiyan Chen, Fuminobu Kimura, Yusuke Kajihara
|
Not avalaible |
G01-250 Oral
|
Study on Biocompatible Poly(lactic acid) Composites with Bioglass Microspheres for Mechanical Properties by Injection Molding Chao-Chang Arthur Chen, Ines Kühnert, Cheng-Hsi Chuang, Yu-Jen Chou, Chen-Hsuan Tai, Fang-Qi Dong
|
Not avalaible |
G01-444 Oral
|
Microstructured surfaces replication using injection molding and compression molding processes A. C. Castro, A. R. Rodrigues, Antonio José Pontes
|
Not avalaible |
G01-97 Oral
|
An approach of manufacturing high molecular weight CNT-filled Epoxy composite jinde zhang
|
G01-361 Oral
|
Manufacturing of non-uniform thickness polycarbonate lenses for high-impact applications using different molding processes Matthew Drew, Robert Tibbetts, Davide Masato, Alireza Amirkhizi, Saurabh Dixit
|
Not avalaible |
G01-43 Oral
|
Injection molding process optimization for stabilizing parts quality of recycled materials by using in-mold sensors Daisuke Yagi, Nakatsuchi Nakatsuchi, Ryotaro Shimada, Kan Kobayashi
|
Not avalaible |
G01-86 Oral
|
Estimation of resin-mold interfacial thermal resistance in the filling process using the in-process visualization system Akifumi Kurita, Yohei Yoshimura, Makoto Suzuki, Hidetoshi Yokoi, Yusuke Kajihara
|
Not avalaible |
G01-54 Oral
|
Interfacial degradation of polycarbonate in long-term testing Catharina Schilp
|
Not avalaible |
G01-306 Oral
|
Effect of Molding Conditions on Internal Structure and Mechanical Properties of Injection Molded Products with High Fiber Content Hayato Kikuta, Akio Ohtani
|
Not avalaible |
G01-53 Oral
|
Influence analysis of mold coatings on the demolding force Catharina Schilp
|
Not avalaible |
G01-49 Oral
|
Machine learning analysis on the effects of metal surface pretreatment conditions on blast-assisted injection molded direct joining Shuohan Wang, Shuaijie Zhao, Fuminobu Kimura , Eiji Yamaguchi, Yuuka Ito, Yusuke Kajihara
|
Not avalaible |
G01-85 Poster
|
The effect of molding conditions on the residual molecular orientation of polystyrene injection moldings Kousaku Tao, Koji Yamada, Seiji Higashi, Keitaro Kago, Shiho Kuwashiro, Hiroshi Hirano, Hiroki Takeshita, Katsuhisa Tokumitsu
|
Not avalaible |
G01-32 Poster
|
Development of Polymer-Metal Hybrid Injection Molds for Fine Transfer Naoto Sugino, Satoshi Takei, Toshiyuki Yokoyama, Yuki Kawano, Riku Miyazaki, Kaori Yasuda, Takao Kameda
|
Not avalaible |
G01-440 Poster
|
Automotive Skylight Injection Molding Automation System Design Mingqian Li, Shuntao Han, Ting Gao, Zhichao Lao, Zhaoxin Ci, Xiuqing Ma
|
G01-439 Poster
|
Development of selection software based on medium-sized injection molding machine Ouyang Luo, Shuntao Han, Mingqian Li, Xiangdong Zhang, Xiuqing Ma
|
G01-438 Poster
|
Design Alternative for Automobile Door Trim Production Line Shuntao Han, Mingqian Li, Ouyang Luo, Mingzhe Duan, Xiuqing Ma
|
G01-436 Poster
|
Design of control system for automobile lampshade production line Shuntao Han, Wenjing Chen, Ouyang Luo, Qiang Shi, Fan Yang, Jiapeng Li, Xiuqing Ma
|
G01-47 Poster
|
Effect of dimensional changes on polypropylene injection molded products on mechanical properties Takuro Fujii, Yuki Kawakami, Takao Kameda, Shigeru Yao
|
Not avalaible |