Name of Symposia: S01 - Mixing Compounding & Blending |
S01-266 Keynote
|
Shear-Induced Particle Migration in Mixing Vessels P.A. Tanguy, F. Bertrand, J.B. Ritz
|
Not avalaible |
S01-528 Keynote
|
Chaotic Features of Flow in Single Screw Extruders- Relevance to Distributive Mixing W. Wang, I. Manas-Zloczower, M. Kaufman
|
Not avalaible |
S01-535 Keynote
|
Determination of Morphology of Immiscible Blends From Rheological Measurements and Vice-et-Versa M. Bousmina, W. Yu
|
Not avalaible |
S01-539 Keynote
|
Characterization and control of TSE and relationship to physical properties D. Bigio
|
Not avalaible |
S01-541 Keynote
|
The Effect of Feeding Mode on Dispersive Mixing Efficiency in Single-Screw Extrusion P.H.M. Elemans, J.M. van Wunnik
|
Not avalaible |
S01-548 Keynote
|
Rheology and Morphology of Compatibilized and Uncompatibilized Polymer Blends E. Van Hemelrijck, P. Van Puyvelde, J. Mewis, P. Moldenaers, S. Velankar
|
Not avalaible |
S01-18 Oral
|
Mixing Immiscible Blends in an Intermeshing Counter-Rotating Twin Screw Extruder R. Potluri, D.B. Todd, C. Gogos
|
Not avalaible |
S01-143 Oral
|
Visualization of Dispersion in Polymer Blends F. Mighri, M.A. Huneault
|
Not avalaible |
S01-142 Oral
|
Process Fingerprints for Polymer Mixing Process – An Industrial Prospective C.-K. Shih, J. Tatibouët, Z. Sun, C.-K. Jen
|
Not avalaible |
S01-137 Oral
|
Deformation and Breakup Phenomena of Agglomerates in Polymer Melts T. Moribe, J.L. White
|
Not avalaible |
S01-79 Oral
|
Dynamical Systems Analysis of Pin Mixers for Single-Screw Extruder W.R. Hwang, T.H. Kwon
|
Not avalaible |
S01-71 Oral
|
Distributive Mixing in a Single Screw Extruder Using Boundary Element Method I. Busuladzic, F.M. Schmidt, P.G. Lafleur
|
Not avalaible |
S01-38 Oral
|
Phase Separation in Melt Blends of Linear and Branched Polyethylene Aa. Stori, B.S. Tanem
|
Not avalaible |
S01-153 Oral
|
Flow Patterns and Mixing Mechanisms in Screw Mixing Element of a Co-Rotating Twin Screw Extruder T. Ishikawa, T. Amano, S. Kihara, K. Funatsu
|
Not avalaible |
S01-22 Oral
|
Investigation Of Structure Evolution In Polymer Blending Using Microfabricated Samples Y. Yang, L.J. Lee, K.W. Koelling
|
Not avalaible |
S01-118 Oral
|
Investigation of Morphology Development and Evaluation of Dispersive Mixing Model During Blending in Single Screw Extruder S. Tyagi, A.K. Ghosh
|
Not avalaible |
S01-34 Oral
|
Low Shear Chaotic Mixing in Single-screw Extruders S.C. Jana
|
Not avalaible |
S01-413 Oral
|
Slip at Polymer-Polymer Interfaces E. Lebaut, M. Bousmina
|
Not avalaible |
S01-74 Oral
|
Influence of Powder Surface Treatment and Flow Geometry on the Dispersion Behavior of Silica into Polymeric Media A. Scurati, D.L. Feke, I. Manas-Zloczower
|
Not avalaible |
S01-504 Oral
|
CaCO3 Dispersion in Polymer Flow: Experimental Study and Simulation of Rupture During Twin Screw Extrusion D. Hochereau, P. Descamps, P. Leempoel, D. Dochain
|
Not avalaible |
S01-180 Oral
|
Development of Morphology in Single-Screw Extrusion of Polyblends K. Wilczynski, Z. Szymaniak, A. Nastaj
|
Not avalaible |
S01-391 Oral
|
Morphology of PMMA/PP/PS Ternary Blend Based on the Interfacial Tension Between their Components A.T. Morita, N.R. Demarquette
|
Not avalaible |
S01-313 Oral
|
Structure and Physical Properties of Maleic Anhydride grafted Polypropylene / Polyamide 6.6 -Blends P. Lehtonen, H.-G. Fritz
|
Not avalaible |
S01-279 Oral
|
A Chemical Model for the Dispersion of Fillers in a Polymeric Matrix T. Lozano, P.G. Lafleur, M. Grmela
|
Not avalaible |
S01-277 Oral
|
Melt Blending of Polystyrene/Organoclay Nanocomposites J. Uribe, M.R. Kamal, A. Garcia-Rejon, L.A. Utracki
|
Not avalaible |
S01-245 Oral
|
Formulation and Thermal Behavior of Thermoplastic Elastomers C. Mazard, L. Benyahia, J.F. Tassin
|
Not avalaible |
S01-237 Oral
|
Interface Generation in Kenics Static Mixers: Optimization O.S. Galaktionov, P.D. Anderson, G.W.M. Peters, H.E.H. Meijer
|
Not avalaible |
S01-234 Oral
|
New Experimental Possibilities for the Investigation of the Melting of Polymer Blends M. Bastian, Th. Gabor, P. Reinheimer
|
Not avalaible |
S01-225 Oral
|
Phase Inversion and Cocontinuity in Immiscible Polymer Blends F. Prochazka, C. Carrot, M. Castro, C. Celle, J.-C. Majesté
|
Not avalaible |
S01-217 Oral
|
Mixing and Diffusion of Plasticizer in Elastomers C. Joubert, P. Cassagnau, A. Michel, L. Choplin
|
Not avalaible |
S01-258 Oral
|
Operational and Design Study of RIM Machines R.J. Santos, M.R.P.F.N. Costa, J.C.B. Lopes, A.M. Teixeira
|
Not avalaible |
S01-566 Oral
|
Interfacial Tension in Liquid Crystalline Polymer Blends M. Kozlowski
|
Not avalaible |
S01-32 Poster
|
Morphology Development in Blending of Polypropylene (PP) and Polyamide 6 (PA6) Under Chaotic Mixing Conditions M. Sau, S.C. Jana
|
Not avalaible |
S01-135 Poster
|
Morphology and Thermal Properties of Blends of PET and a LCP after Capillary Flow L.B. da Silva, M.M. Ueki, R.E.S. Bretas
|
Not avalaible |
S01-155 Poster
|
Effect of Compatibilisation on Interfacial Tension and Dispersed Phase Particle Size of PP/PA6 Blends H. Shariatpanahi, H. Nazokdast, M. Hemmati
|
Not avalaible |
S01-293 Poster
|
Reaction Kinetics and Morphological Changes at Polymer-Polymer Interface measured by Rheological Properties H.Y. Kim, U.Y. Jeong, J.K. Kim
|
Not avalaible |
S01-306 Poster
|
Crystallization Behaviour of Isotactic Polypropylene and High Density Polyethylenes in their Blends with Cycloolefin Copolymers S. Pimbert
|
Not avalaible |
S01-373 Poster
|
A Deformation Model for Ellipsoidal Droplets with Interfacial Tension N.E. Jackson, C.L. Tucker III
|
Not avalaible |
S01-387 Poster
|
A Mechanical Recycling process for Industrial Residues of Polyurethane D.S. Rosa, C.F.G. Guedes
|
Not avalaible |
S01-403 Poster
|
The effect of Dynamic Vulcanization and Maleated PE on the Morphology, Rheology and Mechanical Properties of Toughend Polypropylene S. Bazgir, A.A. Katbab, H. Nazockdast
|
Not avalaible |
S01-423 Poster
|
Selected Mechanical and Thermal Properties of PA/PP Blends J. Koszkul, A. Gnatowski
|
Not avalaible |
S01-33 Poster
|
Issues of Dispersion of Layered Silicate Nanoparticles in Thermosetting Epoxies J.H. Park, S.C. Jana
|
Not avalaible |
S01-2 Poster
|
PP Model Compounds as Tools for the Development of High-Impact Copolymers A. Hauer, K. Bernreitner, M. Gahleitner
|
Not avalaible |
S01-80 Poster
|
Studies in Compounding of Special Additives Into Polyethylene for Films Used for Packaging to Enhance Shelf-Life of Agricultural Produce V. Kale, S. Awate, R. Rangaprasad, Y.B. Vasudeo
|
Not avalaible |
S01-96 Poster
|
A Study on the Poly(trimethylene terephthalate)/Poly(ethylene terephthalate) Blends H. Yoo, S. Lee, W. Kim, D. Kang, H. Kang
|
Not avalaible |
S01-515 Poster
|
Effect of Compatibilisation on Interfacial Tension and Dispersed Phase Particle Size of PP/EPDM Blends H. Shariatpanahi, H. Nazokdast, M. Hemmati
|
Not avalaible |