| Name of Symposia: S03 - Rheology and Process Simulation |
S03-186
Keynote
|
Shear-induced crystallization of polymers: discussion on the coupled mechanical and structural effects
JEAN-MARC HAUDIN, SEVERINE A.E. BOYER
|
Not avalaible |
S03-112
Keynote
|
Measuring and modelling necking of polymers
Paul Edward Spencer, Phil Coates, Fin Caton-Rose, John Sweeney
|
Not avalaible |
S03-10
Keynote
|
ON THE PULSATING FLOW BEHAVIOR OF A BIOLOGICAL FLUID: HUMAN BLOOD
Edtson Emilio Herrera Valencia, Mayra Luz Sánchez Villavicencio, Fausto Calderas, Luis Medina-Torres
|
Not avalaible |
S03-425
Keynote
|
Simulation of Asymmetrical Multilayer Flat Film Coextrusion Regarding Slip at the Wall and Interfacial Slip at the Polymer-Polymer Interface
Christian Kneidinger, Gernot Zitzenbacher, Manuel Längauer, Elias Mayrhofer, Jürgen Miethlinger
|
S03-348
Keynote
|
Modeling of Injection Overmolded Stamp Formed Thermoplastic Composites
Franco S Costa
|
Not avalaible |
S03-270
Keynote
|
Strain-Dependent Upscaling Method in Dissipative Particle Dynamics Simulations of Nanoparticles Orientation Under Shear
Clemens H. Holzer, Ali Gooneie
|
Not avalaible |
S03-58
Oral
|
NUMERICAL SIMULATION OF PLASTIC SHEET SOLIDIFICATION BY USING CHILLING ROLLS
Evan Mitsoulis
|
Not avalaible |
S03-260
Oral
|
Full characterization of multi-phase, multi-morphological kinetics in flow-induced crystallization of iPP at elevated pressure
Gerrit W.M. Peters
|
Not avalaible |
S03-242
Oral
|
Simulative determination of the optimization potential of additively manufactured static mixing elements for extrusion
Christian Hopmann, Malte Schön, Wilhelm Meiners, Liyaowei Shen
|
Not avalaible |
S03-215
Oral
|
Rheology of industrial plastisol formulations
jean-françois Agassant
|
Not avalaible |
S03-21
Oral
|
Linear and Non-Linear Visco-elastic Behavior of Fibrillar Morohology Formed via Fiber Spinning of PP/PA6 Blend
Roozbeh Hajiraissi, Yousef Jahani, Tobias Hallmann
|
Not avalaible |
S03-268
Oral
|
Effect of thermal history on crystallization behavior of polyethylenes in high-speed DSC measurements
Wataru Takarada, Koya Kawai, Yasuhiko Othuki, Yutaka Kobayashi, Takeshi Kikutani
|
Not avalaible |
S03-163
Oral
|
Rheological behaviour of a high melt strength polypropylene at elevated pressure and gas-loading
Daniel Raps, Lutz Heymann, Volker Altstädt
|
Not avalaible |
S03-123
Oral
|
Rheological properties of polyacrylamide and amido amine-based cationic gemini surfactant solutions
Muhammad Shahzad Kamal, S.M. Shakil Hussain, Lionel Talley Fogang, Abdullah Saad Sultan
|
Not avalaible |
S03-12
Oral
|
Design, structuration and rheological properties of Laponite based polymeric nanocomposites
OMAR ABAKAR ADAM, Jean Francois Tassin
|
Not avalaible |
S03-103
Oral
|
Distinction of Measurement-related and Material-related Scattering of Young´s Modulus of Thermoplastics during Tensile Testing
Jan-Uve Walter, Volker Schöppner
|
Not avalaible |
S03-101
Oral
|
Viscosity amplification in dilute suspensions of rods in a Carreau matrix fluid
Jan Domurath, Marina Saphiannikova, Gilles Ausias, Julien Férec, Gert Heinrich
|
Not avalaible |
S03-212
Oral
|
SIMULATION OF THE MELTING BEHAVIOUR IN AN INJECTION MOULDING PLASTICIZING UNIT COMPARED WITH PRESSURE AND ULTRASOUND MEASUREMENTS
Dominik Altmann, Bernhard Praher, Georg Steinbichler
|
S03-428
Oral
|
Molecular Dynamics simulations of isocyanate-based molecules viscosity
Veniero Lenzi, Piet J. Driest, Dirk J. Dijkstra, Frank U. Richter, Dimitrios Statamatialis, Dirk W. Grijpma, Marta Maria Duarte Ramos, Luís Silvino Alves Marques
|
Not avalaible |
S03-373
Oral
|
Prediction of final crystal morphology of semi-crystalline polymers using Phase Field Modeling (PFM)
Nasrin Baghershahi, Behzad Pourabbas, Mahdi Salami Hosseini
|
Not avalaible |
S03-276
Oral
|
PEROXIDE CROSSLINKING OF LINEER LOW DENSITY POLYETHYLENE
GULSEN KURT DEMIR, EZGI BICER, MEHMET KODAL, GURALP OZKOC
|
Not avalaible |
S03-371
Oral
|
A New Implementation of the Surface Tension Force to Reduce the Spurious Currents in Two-Phase Flow
Mehdi Mostafaiyan, Sven Wießner, Gert Heinrich
|
Not avalaible |
S03-40
Oral
|
Evaluation of the Influence of the Tool Surface on Polymer Melt Flow Using a Novel Rheological Extrusion Slit Die
Gernot Zitzenbacher, Elvio Brunner
|
S03-334
Oral
|
Extrusion and Injection Molding Nanocellulose - Polypropylene Nanocomposites: Critical Processing Aspects
Burcu Girginer, Mert Emre Oztoksoy, Ramazan Bedirhan Yildiz, Fatma Seniha Guner, Mehmet Ozgur Seydibeyoglu, Deniz Taskin
|
Not avalaible |
S03-43
Oral
|
Effects of interparticle interactions on the flow behaviour of low density polyethylene filled with various fillers
Nico Laufer
|
S03-449
Oral
|
APPLICATION OF MULTI-SCALE APPROACH TO RUBBERS REINFORCED AT DIFFERENT PROCESSING CONDITIONS
Ievgeniia Ivaneiko, V. Toshchevikov, A. L. Svistkov, G. Heinrich, M. Saphiannikova
|
Not avalaible |
S03-309
Oral
|
Viscosity Measurements for Rubber Compounds using Slit-die Rheometry
Walter Friesenbichler, Andreas Neunhaeuserer
|
Not avalaible |
S03-306
Oral
|
Viscoelastic Effects on the roll-separating force and power input on the Calendering Process of a Non-Newtonian Fluid
Jaime Ernesto Muñoz Sánchez
|
Not avalaible |
S03-46
Oral
|
Following Phase Transitions with Rheometry and Simultaneous Raman-Spectroscopy
Bernd Jakob
|
Not avalaible |
S03-49
Oral
|
Correlation of steady shear rheology and morphology of Nylon 6 glass fibre composites
Deverpiran Vishak Perumal, Sati N Bhattacharya, Rahul K Gupta, Franco S Costa
|
Not avalaible |
S03-367
Oral
|
Effects of morphology and rheology on Nylon 6 glass fibre composites
Rahul K Gupta, Deverpiran Vishak Perumal, Sati N Bhattacharya, Franco S Costa
|
Not avalaible |
S03-205
Poster
|
HYDRODYNAMIC CHARACTERISTICS OF THE POLYMER MELTS FLOWS IN THE CONVERGING PLANE-PARALLEL CHANNELS
Grigory Pyshnograi, Konstantin Koshelev, Alexander Kuznetcov, Vadim Bocharnikov
|
Not avalaible |
S03-136
Poster
|
Using the Cone Partitioned Plate geometry for enhanced material characterization of polymer melts
Viktor Reim, James P Eickhoff, Gunther Arnold, Jörg Läuger
|
Not avalaible |
S03-150
Poster
|
Modeling the Flow of Non-Newtonian Fluids in Single-Screw Extruders
Christian Marschik, Wolfgang Roland, Juergen Miethlinger
|
Not avalaible |
S03-151
Poster
|
Shear Stress Growth Phenomena of Amorphous Polymer in Low Shear Rate Region
Natsumi Yamasaki, Aya Tominaga, Hiroshi Sekiguchi, Ryoko Nakano, Shigeru Yao, Eiichi Takatori
|
Not avalaible |
S03-265
Poster
|
The Influence of the Morphological Structure of Polymer Foam-Based Adsorbents for the Treatment of Organic Contaminated Wastewater
Pavani Cherukupally, Krishna Prasad Nagarajan Ramani, Amy M. Bilton, Chul B. Park
|
Not avalaible |
S03-204
Poster
|
MATHEMATICAL MODELING OF THE FILM FORMING POLYMER IN A BIAXIAL STRETCHING
Grigory Pyshnograi, Darina Merzlikina, Alexander Kuznetcov
|
Not avalaible |
S03-239
Poster
|
Surface treatment of cellulose nanocrystals (CNC) – effects on dispersion rheology
Lilian Forsgren, Karin Sahlin, Tobias Moberg, Gunnar Westman, Mikael Rigdahl
|
Not avalaible |
S03-327
Poster
|
Influence of Talc Properties on Processability, Rheological Behaviour and Crystallinity of PP Based Automotive Compounds
Ramazan Bedirhan Yildiz, Burcu Girginer, Fatma Seniha Güner
|
S03-245
Poster
|
Optimization for Starve Fed/Flood Fed Single Screw Extrusion
Andrzej Nastaj, Krzysztof Wilczyński
|
Not avalaible |
S03-291
Poster
|
Structure development in molten conductive polymer composites studied by electrical-rheological measurements
Zdenek Stary
|
Not avalaible |
S03-281
Poster
|
LCB formation in PLA by reactive extrusion
Joachim Kaschta, Lydia Lanzl, Simon Lemppenau, Dirk W Schubert
|
Not avalaible |
S03-203
Poster
|
ANALYSIS OF NONLINEAR VISCOELASTIC PROPERTIES OF POLYMERIC MATERIALS AT THEIR LARGE PERIODIC DEFORMATION
Grigory Pyshnograi, Nadezdha Cherpakova, Olga Kondratieva
|
Not avalaible |
PPS CONFERENCES PROCEEDINGS