Name of Symposia: S01 - Additive manufacturing (3D printing) |
S01-35 Keynote
|
Flow Characteristics of a Thermoset Photopolymer Resin in a Vat Polymerization Additive Manufacturing Process Thomas Hofstätter, Jon Spangenberg, David Bue Pedersen, Guido Tosello, Hans Nørgaard Hansen
|
S01-175 Keynote
|
Material Extrusion Additive Manufacturing of Polypropylene/Carbon Fiber Composites Martin Spoerk, Chethan Savandaiah, Florian Arbeiter, Gerhard Traxler, Ludwig Cardon, Clemens H. Holzer, Janak Sapkota
|
Not avalaible |
S01-266 Keynote
|
Effect of operating conditions on cooling and adhesion of parts produced by FDM/FFE Sidonie Costa, Fernando Duarte, Jose Covas
|
Not avalaible |
S01-141 Keynote
|
Polymer Powders for Laser Sintering: Powder Production and Performance Qualification Manfred Schmid, Marc Vetterli, Konrad Wegener
|
S01-97 Keynote
|
Mechanical analysis of the FDM Additive Manufacturing Process jean-francois AGASSANT, Franck Pigeonneau, Michel Vincent
|
S01-384 Keynote
|
Novel experiments and modelling for SLS printing Patrick Anderson
|
Not avalaible |
S01-109 Keynote
|
Redefining the Future of LNG Processing; Role of Additive Manufacturing Tejas Bhatelia, Vishnu Pareek, Ranjeet Utikar, Moses Tade
|
Not avalaible |
S01-48 Oral
|
Internal Fiber Structure of a High-Performing, Additively Manufactured Injection Molding Insert Thomas Hofstätter, Sina Baier, Camilla H Trinderup, Carsten Gundlach, David Bue Pedersen, Guido Tosello, Hans Nørgaard Hansen
|
S01-506 Oral
|
The Study on Polypropylene Applied in Fused Deposition Modeling Mu Dong
|
S01-230 Oral
|
Hollow glass micro sphere as fillers for stereolithography resins Francesca Bisi, Federica Bondioli, Massimo Messori
|
Not avalaible |
S01-254 Oral
|
Fusion-Bonding behavior of Plasticized Corn Proteins in Fused Deposition Modeling process Laurent CHAUNIER, Benoît DUCHEMIN, Estelle COUALLIER, Guy DELLA VALLE, Denis LOURDIN, Anne-Laure REGUERRE, Eric LEROY
|
S01-496 Oral
|
Modelling 3D Printed Origami Metamaterial Using Representative Unit Cell (RUC) Mohamed Ali Emhmed Kshad, Hani E Naguib
|
Not avalaible |
S01-267 Oral
|
Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing Stephan Schuschnigg, Martin Spoerk, Joamin Gonzalez-Gutierrez, Janak Sapkota, Clemens Holzer
|
Not avalaible |
S01-270 Oral
|
Development and Modeling of Design and Process Guidelines for FDM-Structures for the Partial Reinforcement of Hybrid Structures Elmar Moritzer, Andre Hirsch, Franziska Bürenhaus
|
S01-34 Oral
|
Thermal Simulation of Additively Manufactured Injection Molding Inserts Thomas Hofstätter, David Bue Pedersen, Guido Tosello, Hans Nørgaard Hansen
|
S01-146 Oral
|
Study and Development of 3D Printed Plastic Insert for Injection Molding of Automotive Interior Prototype Parts Pakjira Sirirutbunkajal, Patcharee Larpsuriyakul, Cattaleeya Pattarmaprom, Jareenuch Rojsatean, Natcha Prakymoramas, Dumrong Thanomjitr, Sanya Kaewket
|
Not avalaible |
S01-405 Oral
|
Predicting of sintering parameters for selective laser sintering: the stable sintering region and chemical stability Juergen E.K. Schawe
|
Not avalaible |
S01-17 Oral
|
Influence of anisotropy in the build plane on characterization of short-glass-fiber-reinforced poly(butylene terephthalate) for laser sintering SATOSHI ARAI, SHIGEHARU TSUNODA, AKIHIRO YAMAGUCHI, TOSHIAKI OUGIZAWA
|
S01-318 Oral
|
Optimization of Material Properties for Highly-Filled Thermoplastic Polymers used in Fused Filament Fabrication of Ceramics Santiago Cano, Hrvoje Cajner, Joamin Gonzalez-Gutierrez, Janak Sapkota, Christian Kukla, Florian Arbeiter, Stephan Schuschnigg, Clemens Holzer
|
S01-36 Oral
|
Investigation of Fiber-Matrix Interface of Additively Manufactured Thermosets with Respect to Chemical Composition Thomas Hofstätter, Ali Davoudinejad, David Bue Pedersen, Guido Tosello, Hans Nørgaard Hansen
|
Not avalaible |
S01-364 Oral
|
The fabrication of biodegradable inferior vena cava filter via 3D printing technology Hung Ruei Lin, Jane Wang
|
Not avalaible |
S01-41 Oral
|
Advanced resins for stereolithography: in situ generation of silver nanoparticles Corrado Sciancalepore, Gabriele Taormina, Federica Bondioli, Massimo Messori
|
Not avalaible |
S01-271 Oral
|
A method to evaluate the process specific warpage for different polymers in the FDM process Christian Schumacher, Volker Schöppner, Camilla Fels
|
S01-10 Poster
|
3D Printing of Polypropylene by Fused Deposition Modeling (FDM) Technique Chuanchom Aumnate, Pranut Potiyaraj
|
Not avalaible |
S01-329 Poster
|
Biodegradable three-dimensional (3D) -Printed Cage for Mechanical Support and Nanofibrous Membranes for Sustainable Release of Antimicrobial Agents Y.C. Chou, S.J. Liu
|
Not avalaible |
S01-456 Poster
|
Quarter-wave resonator-based acoustic metasurface fabricated by 3D printing Jia-Hong Sun, Yi-Han Liao, An-Hsiang Chen
|
Not avalaible |
S01-276 Poster
|
Research progress of rapid tooling technology Wei Zou
|
Not avalaible |