PPS Conferences Proceedings
       
Home > PPS2017 (2017) > S06 - Injection Molding and Extrusion
Name of Symposia: S06 - Injection Molding and Extrusion
S06-162
Keynote
The SPLINE polymer extruder concept - A novel grooved barrel single screw extruder
Jürgen Miethlinger, Wolfgang Roland
Not avalaible
S06-79
Keynote
Mechanical characterization of iPP injection molded samples on multiple length scales
Sara Liparoti, Andrea Sorrentino, Vito Speranza, Giuseppe Titomanlio
S06-273
Keynote
AUTOMATION OF AN ULTRASOUND MIXING HEAD FOR LOW PRESSURE RESIN TRANSFER MOLDING
Maximilian Kunibert Schaefer, Wolfgang Raffelt, Simon Wittmann, Stefan Ehrenreich, Swen Zaremba, Klaus Drechsler
Not avalaible
S06-314
Keynote
A study on cooling performance in injection molding. Heat conductive mold materials versus conformal cooling channels.
Gerald Roman Berger, Walter Friesenbichler, David Zorn, Franz Bevc
Not avalaible
S06-57
Keynote
Integrative simulation of weld line strength in unreinforced amorphous thermoplastics
Christian Hopmann, Jakob Onken, Lukas Gröning
S06-347
Keynote
SIMULATION OF THE MOLD STRUCTURE FOR REDUCING CAVITY FILLING DEVIATION IN MICRO INJECTION MOLDING
Woo Il Lee, Sung Nam Moon, Jae Min Jung
Not avalaible
S06-192
Keynote
Defects in Industrial Film Extrusion
John Vlachopoulos
Not avalaible
S06-100
Keynote
New approach for the efficient attainment of flame retardancy using multi component injection molding
Dorothea Schneider, Christof Hübner, Serge Bourbigot
S06-354
Keynote
Multi-scale investigation and fundamental studies on interface/interphase in multilayered polymer systems towards better controlling coextrusion process
Khalid Lamnawar, Abderrahim Maazouz, Bo Lu, Arnaud Bondon
Not avalaible
S06-224
Keynote
A Novel Method for the Prediction of Adhesive Strength for Two-Component Injection Moulding of Thermoplastics with Thermoset Rubbers
Wim Six, Gert-Jan Bex, Jozefien De Keyzer, Frederik Desplentere, Albert Van Bael
S06-104
Oral
A new approach to model thermal expansion of semi crystalline polymers.
Esther Ramakers-van Dorp, Thomas Haenel, Dirk Reith, Berenika Hausnerová, Bernhard Möginger
Not avalaible
S06-106
Oral
Extrusion of High-Performance Polyetherimide Pipes with variable wall thickness for aircrafts
Michael Stegelmann, Niels Modler, Peter Lucas
S06-208
Oral
Bubble-free Polymer Devolatilization in a Simplified Extruder Model
Stefan Hirschfeld, Olaf Wünsch
S06-217
Oral
Simulation of the effects of using conformal cooling channels in SLM produced plastic extrusion calibrators.
Karen Soete, Frederik Desplentere
S06-237
Oral
Manufacturing and characterisation of lidocaine films prepared by hot melt extrusion.
Karthik Nair, Phil Coates, Ben Whiteside, Adrian Kelly, Sachin Korde, Simon Wellings, Anant Paradkar
Not avalaible
S06-240
Oral
Single Screw Foam Extrusion with Low Pressurized Blowing Agents
Martin Langlotz, Matthias Düngen, Michael Koch
S06-249
Oral
Online analysis of melt viscosity during injection moulding with a hot runner rheometer
Christian Hopmann, Julian Heinisch
S06-255
Oral
Influences of Processing Parameters on the Melt Temperature Homogeneity in Injection Moulding
Klaus Straka, Bernhard Praher, Georg Steinbichler
Not avalaible
S06-229
Oral
Effects of different mold surface coatings on the ejection force in micro injection molding
Marco Sorgato, Davide Masato, Giovanni Lucchetta
Not avalaible
S06-290
Oral
Enhancing the Weld Line Strength of Injection Molded Components
Alexander Geyer, Christian Bonten
S06-190
Oral
The Use of Micromechanical Models to Predict Fiber Reinforced Plastics
Fabian Willems, Christian Bonten
S06-180
Oral
Experimental Investigation and Improved Modeling of the Melting Process in Single-screw Extruders with a Grooved Plasticizing Cylinder
Jochen Kettemann, José Antonio Avila-Alfaro, Christian Bonten
S06-177
Oral
Direct Visualization of Cavity Filling and Demolding Phenomena through Textured Glass Block
Chenyang Wang, Shigeru Owada, Hidetoshi Yokoi
Not avalaible
S06-176
Oral
Mechanical Property Model for Fiber Filled Thermoplastics Incorporating Surface Tension
Matthias Bruchmüller, Michael Koch, Julius Geis
S06-17
Oral
Tailored microstructures and properties of microinjection moulded isotactic polypropylene/poly (ethylene terephthalate) blends
Zhongguo Zhao, Hongwen Sun, Pingping Wu, Qi Yang
Not avalaible
S06-168
Oral
Investigation of the Melt Quality of a Wave Screw in a Grooved Plasticizing Zone with a High Specific Throughput Rate
Philipp Thieleke, Timo Räpple, Christian Bonten
S06-167
Oral
Investigation of Residence Time Distribution of Different Screw-barrel Concepts via Ultrasound in Single-screw Extrusion
Philipp Thieleke, Christian Bonten
S06-161
Oral
Effects of Pellet Characteristics and Feed Zone Design on the Output of Grooved-feed Extruders at High Screw Speeds
Oliver Tim Kast, Markus Koch, Christian Bonten
S06-153
Oral
Integration of Electrochromic Devices in Plastic Parts by Injection Moulding
Viola Sauer, Joachim Schnieders, Hans-Peter Heim
Not avalaible
S06-152
Oral
Smart Data Analysis for optimized Manufacturing of Powder Coatings on Co-rotating Twin Screw Extruders
Sophie Pachner, Jürgen Miethlinger
S06-127
Oral
Investigations of starved-fed grooved barrel single screw extruders in industry-standard output ranges
JUERGEN MIETHLINGER, Christian Marschik
Not avalaible
S06-126
Oral
Pelletize condition dependence of injection molded article of recycle plastic.
Aya Tominaga, Nozomi Takenaka, Natsumi Yamasaki, Ryoko Nakano, Hiroshi Sekiguchi, Tetsunari Michiue, Shunsuke Sugao, Shigeru Yao
Not avalaible
S06-125
Oral
Mechanical Characterization of Frontal and Flowing Weld Lines in Injection-molded Short Fiber-reinforced Thermoplastics
Mohamed Besher Baradi, Gilles Régnier, Camilo Cruz
S06-193
Oral
Visualization Analysis on Reciprocating Plastication Process of Glass Fiber Reinforced Resin by Glass-inserted Heating Cylinder
Sai MA, Hidetoshi YOKOI
Not avalaible
S06-461
Oral
Improvement of the Reproduction Accuracy of a Defined Pole Length of Injection Molded Encoder Wheels
Katharina Kurth, Dietmar Drummer
S06-310
Oral
Capability database of injection moulding process-requirments for wider suitability and higher acceptance
Srinivasa Murthy Boorla, Tobias Eifler, Jens Dines Obel Jepsen, Thomas J Howard
Not avalaible
S06-417
Oral
Knowledge-based Material Selection for injection-molded, thermoplastic Parts
Alexander Porsch, Johannes Wortberg, René Andrae, Peter Köhler
S06-433
Oral
The Behavior of Bulk Solids in the Solids Conveying Zone of Smooth Barrel Single Screw Extruders: Friction, Bulk Density and Pressure Anisotropy
Christian Kneidinger, Gernot Zitzenbacher, Manuel Längauer, Stefan Schuschnigg, Jürgen Miethlinger
Not avalaible
S06-453
Oral
Numerical analysis of the fountain flow instability
Tim Smit, M. A. Hulsen, P. D. Anderson
Not avalaible
S06-456
Oral
In-situ X-ray analysis during Flash DSC experiments: study of isothermal crystallization and phase transformation of Polyamide 12
Fabio Paolucci, Leon E. Govaert, Gerrit W. M. Peters
Not avalaible
S06-406
Oral
Flow visualization of thin-wall injection molding and effect of mold coatings
Davide Masato, Maksims Babenko, Giovanni Lucchetta, Ben Whiteside
Not avalaible
S06-460
Oral
Thermoforming – Determining Temperature Profiles Across Sheet Thickness by Pyrometic Measurements
Benjamin Neubig, Christian Bonten
S06-392
Oral
Lifetime estimations of a TPU-metal composite subjected to thermal loads
Alejandro Puentes-Parodi, Leandro Ariel Santoro, Michael Gehde, Andreas Leuteritz, Ines Kuehnert
S06-47
Oral
Crystallization Behavior of Injection Molded Semi-Crystalline Thermoplastics
Yvonne Spörer, Carolina Blanco, Ines Kuehnert
S06-55
Oral
Shrinkage, Warpage And Residual Stresses Of Injection Molded Parts
Tristan Koslowski, Christian Bonten
S06-56
Oral
A concept of an injection compression mould for non-invasive ultrasound tomographic temperature measurements
Jens Wipperfürth, Christian Hopmann
S06-6
Oral
Microinjection Molding of Polypropylene/Multi-walled Carbon Nanotubes Nanocomposites
Shengtai Zhou, Andrew Hrymak, Musa Kamal
Not avalaible
S06-64
Oral
Microinjection molding of carbon filled polypropylene nanocomposites: the effect of filler type on electrical and morphological properties of micro-moldings
Shengtai Zhou, Andrew Hrymak, Musa Kamal
Not avalaible
S06-75
Oral
Characterization of Bulk Materials for Single Screw Extrusion by Means of Fluidization Testing
Matthias Düngen, Zhibin Li, Michael Koch
S06-459
Oral
Comparison of Different Ultrasonic Methods for Weld Line Characterization
Peter Fey, Marc Kreutzbruck
Not avalaible
S06-351
Oral
Study of the factors affecting heating mechanism in ultrasound microinjection moulding
Maksims Babenko, Ben Whiteside, Mert Gulcur, Davide Masato
Not avalaible
S06-93
Oral
Evaluation of Physical Properties and Surface Microstructures Replication of Liquid Silicone Rubbers Obtained by Reactive Injection Molding
Hiroshi Ito, Taisuke Satoh, Akira Ishigami, Akihiko Nemoto
Not avalaible
S06-323
Oral
Development of a new measurement concept for the process-oriented characterization of rheological material properties
Michael Burgfeld, Johannes Wortberg
S06-328
Oral
Preparation and Microinjection Molding of Polyoxymethylene/Molybdenum Disulfide Nanocomposite
Yinghong Chen, Sen Yang, Chaonan Yang, Qi Wang
Not avalaible
S06-33
Oral
Effect of screw design on fiber breakage and dispersion of FRTP in injection molding
So SHIMOKUSUZONO, Akira INOUE, Tatsuya TANAKA
Not avalaible
S06-349
Oral
MEASUREMENT OF TWO-DIMENSIONAL TEMPERATURE DISTRIBUTIONS INSIDE FILLING MELTS ALONG CROSS-SECTION OF CAVITY USING INTEGRATED THERMOCOUPLE SENSOR
Hidetoshi Yokoi, Shouma Ishida, Norimichi Masuda, Takehiro Yamada
Not avalaible
S06-320
Oral
Investigation of The Relationship IR Heating and Injection Molding Parameters of Composite Laminates Which Shaped by Overmolding Technique
Gurcan Mert Gulsozlu, Yavuz Emre Yagci, Burcu Girginer, Mehmet Ozgur Seydibeyoglu
S06-363
Oral
Construction of a pipe support with overmoulded metal insert
Karsten Anger, Christoph Lakemeyer, Ella Lochbaum, Mark Haksteter
Not avalaible
S06-38
Oral
Fiber Length Reduction During Injection Molding
Elmar Moritzer, Gilmar Heiderich
S06-381
Oral
Waste heat utilization for granulate preheating in extrusion processes to increase energy efficiency
Fabian Baumgarten
S06-383
Oral
Investigation on the influences of injection moulding process parameters on the short-shot filling of polymeric micro features
Abdelkhalik Mohamed Eladl, Guido Tosello, Aminul Islam, Rania Mostafa, Hassan Soltan, Hans Hansen
Not avalaible
S06-391
Oral
Injection mouldings consisting of a thermosetting plastic and an elastomer -Characterisation of the adhesion mechanisms on joined thermosetting plastic / elastomer composites
Ulrich Heyne, Michael Gehde
S06-339
Oral
A new joint product made of PCM and plastic for application in water-powered heat storage systems manufactured by a coextrusion process
Michael Andretzky, Ulrich Gardemann, Johannes Wortberg
Not avalaible
S06-179
Poster
Influence of Processing Parameters on the Morphology of Co-Injected Foamed Parts
Katharina Wunderlich, Thomas Neumeyer, Volker Altstaedt
Not avalaible
S06-413
Poster
Hygrothermal aging and effect of corrosion in polymer-metal joints
Leandro Ariel Santoro, Jaime Alejandro Puentes Parodi, Ines kuehnert
Not avalaible
S06-254
Poster
Influence of reprocessing on the mechanical and thermal properties of polypropylene
Adriana Martinelli Catelli Catelli, Amanda Marques Venâncio
Not avalaible
S06-202
Poster
Experimental analysis of conformal cooling in SLM produced injection moulds: Effects on process and product quality
Tim Evens, Wim Six, Jozefien De Keyzer, Frederik Desplentere, Albert Van Bael
S06-63
Poster
Highly filled suspensions with zirconia powders: Assessment and control of the surface chemistry
Marie-Camille Auscher, Philippe Cassagnau, René Fulchiron, Thomas Périé
Not avalaible
S06-110
Poster
Extrusion-ultrasound on polyethylene terephthalate and polycarbonate composite from recycled materials
Antonio Sanchez-Solis, Vianney Revilla, Maria Corcuera, Octavio Manero
Not avalaible