Name of Symposia: S07 - Process Modeling and Simulation |
S07-649 Keynote
|
Simulation of Long Fiber Orientation during Injection Molding in the Presence of Fiber Breakage Donald Baird, Hongyu Chen, Greg Lambert
|
Not avalaible |
S07-89 Keynote
|
Investigation of the knife-over-roll coating process for Plastisols coating applications Jean-François Agassant , Yves Demay , Romain Castellani , Yamina Abdesselam, Richard Peres, Diego Gourdin
|
S07-18 Keynote
|
EXTRUDATE SWELL OF A HIGH-DENSITY POLYETHYLENE MELT: MODELING USING INTEGRAL AND DIFFERENTIAL CONSTITUTIVE EQUATIONS Evan Mitsoulis, Vinod Kumar Konaganti, Savvas G. Hatzikiriakos
|
Not avalaible |
S07-669 Keynote
|
Process Modeling of Flow and Heat Transfer in Thermoset Pultrusion Pavel Simacek, Hatice Sas, Suresh Advani
|
Not avalaible |
S07-532 Keynote
|
Simulation of thermoplastic prepreg thermoforming based on a visco-hyperelastic model eduardo guzman-maldonado, Nahiene Hamila, boisse philippe
|
Not avalaible |
S07-466 Oral
|
Effect of crystallization on PEEK bearing components Richard Pieter Schaake, Jiying Fan, Jeremy Joseph Weigand, Jason Louis Williams, Alicyn Marie Rhoades
|
S07-440 Oral
|
Crystallization Study Under Processing Conditions: High Cooling Rate And High Pressure Baptiste Pignon, Nicolas Boyard, Vincent Sobotka, Didier Delaunay
|
Not avalaible |
S07-416 Oral
|
Modeling and Optimization of Melt Filtration Systems in Polymer Recycling Sophie Pachner, Michael Aigner, Jürgen Miethlinger
|
S07-356 Oral
|
Modelling of solid phase deformation Paul Spencer, Fin Caton-Rose, John Sweeney, Phil Coates
|
Not avalaible |
S07-308 Oral
|
Phase-field models for partially miscible systems Jang Min Park
|
Not avalaible |
S07-305 Oral
|
A macroscopic model for predicting flow induced orientation of fibers in viscoelastic fluids Domenico Borzacchiello, Emmanuelle Abisset-Chavanne, Francisco Chinesta, Roland Keunings
|
Not avalaible |
S07-291 Oral
|
NUMERICAL SIMULATION AND VALIDATION OF THE SHRINK PROCESS OF PLASTIC FILMS IN PACKAGING APPLICATIONS Daniel Klein, Johannes Zimmer, Markus Stommel
|
Not avalaible |
S07-265 Oral
|
Multiphase and Multiscale Approaches for Modeling the injection of textured molds Patrice LAURE, Rebecca Nakhoul, Luisa Silva, Michel Vincent
|
Not avalaible |
S07-493 Oral
|
Characterization of the constitutive behaviour of aPET in the stretch blow moulding process Shiyong Yan, Gary Menary, James Nixon
|
Not avalaible |
S07-252 Oral
|
On The Numerical Thermo-rheological-kinetical modeling Of Fibre-reinforced Composites Luis Fernando Salazar Betancourt, Patrice Laure, Luisa Silva, Mustafa Sager
|
Not avalaible |
S07-241 Oral
|
Enhanced Shrinkage Prediction Considering Cooling Rate Effects on PVT Franco S Costa, Peter S Cook, Zhihao Zuo
|
S07-230 Oral
|
EROSION IN EXTRUDER FLOW: A NUMERICAL AND ANALYTICAL STUDY Miron Kaufman, Petru S. Fodor
|
S07-223 Oral
|
Evaluation of Fiber Orientation Prediction for automotive applications Armin Kech
|
Not avalaible |
S07-160 Oral
|
A semi-mechanistic model for polyurethane cure thermokinetics : Application to a natural rubber based thermoset Thi Kieu Nhung Tran, Gaël Colomines, Arnaud Nourry, Jean François Pilard, Rémi Deterre, Eric Leroy
|
S07-145 Oral
|
Multi-scale simulations of polymer melt flow in a contraction and expansion channel Takashi TANIGUCHI, Kohei HARADA
|
Not avalaible |
S07-141 Oral
|
Application of the Least Square Finite Element Method in the Interface Tracking of a Two-Phase Flow Mehdi Mostafaiyan, Sven Wiessner, Gert Heinrich
|
S07-128 Oral
|
Cavity Dependence of Core Penetration in Co-Injection Multi-Cavity Molding Chao-Tsai Huang, Chih-Chung Hsu, Rong-Yeu Chang, Shi-Chang Tseng
|
S07-256 Oral
|
Two phases model for highly suspended viscous flow and 3D simulation Guillaume Francois, Laurence Ville, Stany Gallier
|
Not avalaible |
S07-616 Oral
|
A Computational Study of the Rheology and Structure of Surfactant or Co-Polymer Covered Droplets Joao Maia, Arman Boromand
|
Not avalaible |
S07-704 Oral
|
Prediction of Cross-Sectional Shape at Die Exit on Film Casting Process by Viscoelastic Flow Simulation Shuichi Tanoue, Hideyuki Uematsu, Yoshiyuki Iemoto
|
S07-696 Oral
|
Experimental characterisation and identification of elastic-viscoplastic polymer properties used in hot embossing process Gang CHENG, Thierry Barrière, Jean-Claude Gelin, Mohamed Sahli
|
S07-499 Oral
|
Experimental Study of Polymer Degassing in an Agitator Vessel Stefan Hirschfeld, Olaf Wünsch
|
S07-789 Oral
|
Simulation of the Micropelletization Process using the Corotational Maxwell Model Christian Schäfer, Tim A. Osswald
|
Not avalaible |
S07-718 Oral
|
Modeling and characterization of Bush aircraft tire L. Hélène ELIAS-BIREMBAUX, Nadia Arif, Iulian ROSU , Frédéric LEBON
|
Not avalaible |
S07-633 Oral
|
3D Viscoelastic Flow with Free and Moving Boundaries Using a Stabilized Finite Element Method Rekha R Rao, Daniel Hariprasad, Weston Ortiz, Robert Secor, P. Randall Schunk
|
Not avalaible |
S07-67 Oral
|
Investigation of the influence of material and pellet shape on the dissipation in the solids conveying zone of single-screw extruders based on the Discrete Element Method (DEM) Jan Trippe, Volker Schöppner
|
S07-614 Oral
|
Evaluation of Melt Cooling Prediction and Determination of HTC Values for Microinjection Moulding Maksims Babenko
|
Not avalaible |
S07-602 Oral
|
Numerical simulation of the filling phase in the micro injection molding process for a three dimensional micro gear. SAIDI Karim, Rabie ELOTMANI, Mohamed MONKADE, Khalid kandoussi, Younes CHHITI, Hicham AMRANI
|
Not avalaible |
S07-59 Oral
|
Analysis of pellet diameter and inorganic filler influences on the polymer melting behavior in planetary roller extruders Johannes Rudloff, Marieluise Lang, Karsten Kretschmer, Peter Heidemeyer, Martin Bastian, Michael Koch
|
S07-571 Oral
|
ASSESSING A COMPLETELY DIGIAL COMPONENT DESIGN OF SHORT GLASS FIBRE REINFORCED COMPOSITE INJECTION MOULDINGS Fin Caton-Rose, Peter Hine
|
Not avalaible |
S07-85 Oral
|
Novel Approach for Modeling the Dynamics of Fiber Breakage in Polymer Matrix Composites during Capillary Extrusion Federico Sporleder, José M. Carella, Carlos A. Dorao, Leandro N. Ludueña
|
Not avalaible |
S07-530 Oral
|
Modeling Devolatilization in Single-Screw and Multi-Screw Extruders Christian Marschik, Bernhard Löw-Baselli, Jürgen Miethlinger
|
S07-103 Oral
|
Alternative Energy Source Impact on Synthesis of Poly Lactic Acid through Continuous Reactive Extruder: Reaction kinetics modeling SATYA PRAKASH DUBEY, Hrushikesh A Abhyankara, VERONICA MERCCHANTE, JAMES L BRIGHTON, BJORN BERGMANN, GIANG TRINH, CHANTAL DAVID
|
Not avalaible |
S07-782 Poster
|
Finite element simulation of 2.5/3D shaped and rigid electronic circuits Imen Chtioui
|
Not avalaible |
S07-674 Poster
|
Temperature dependence of the hydrodynamic characteristics of the flow of the polymer melt in the converging channels Alexandr Kuznetsov, Konstantin Koshelev, Mikhail Tolstykh, Grigory Pyshnograi, Jean-Charles Naud
|
S07-64 Poster
|
POLYMER FILM PRODUCTION AND RHEOLOGICAL CHARACTERISTICS OF FORMING SOLUTIONS Grigory Pyshnograi, Jean-Charles Naud, Olga Kondratieva, Julia Tregubova
|
S07-56 Poster
|
BEHAVIOUR OF THE THERMAL CONDUCTIVITY OF AMORPHOUS POLYMERS Wilson Nunes dos Santos
|
S07-647 Poster
|
Unusual pvT-behavior of amorphous polymers under processing conditions and consequences for the process simulation Reinhard Forstner, Rotraud Freytag, Jose Antonio Jil Perez, Claudia Maticka
|