| Name of Symposia: S18 - Special Symposium: Additive Manufacturing for Plastic Components |
S18-484
Keynote
|
SLS 3D printing of Thermoplastic Polyurethane Carbon Nanotubes Nanocomposites
Hesheng Xia
|
Not avalaible |
S18-269
Keynote
|
Crosslinking of Laser Sintered Polyamide 12 and Polyethylene Parts
Andreas Wegner
|
S18-590
Keynote
|
Simulation of Selective Laser Melting process for thermoplastic powder
Gilles JP REGNIER
|
Not avalaible |
S18-251
Oral
|
3D Printing Of Maize Protein By Fused Deposition Modeling
Laurent CHAUNIER, Eric LEROY, Guy DELLA VALLE, Michèle DALGALARRONDO, Bénédicte BAKAN, Didier MARION, Baptiste MADEC, Denis LOURDIN
|
S18-254
Oral
|
Viscoelastic modelling of gas pore collapse during polymer sintering
Ingo Alig, Florian Wohlgemuth
|
S18-274
Oral
|
Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication
Christian Kukla, Ivica Duretek, Stephan Schuschnigg, Joamin Gonzalez-Gutierrez, Clemens Holzer
|
S18-338
Oral
|
Screening methodology for the identification of new polymers for Laser Sintering
Leander Verbelen, Peter Van Puyvelde
|
Not avalaible |
S18-360
Oral
|
Iinvestigation of the laser sintering process from the melt side
Thomas Jarry, Claire Barrès, Jean-Yves Charmeaux
|
Not avalaible |
S18-449
Oral
|
Relationships between ABS Copolymer Composition, Filament Quality and 3D Printing Performance in FDM Process
Stéphanie Baumann, Frank Eisenträger, Norbert Niessner, Josef Meiners, Hans-Werner Schmidt, Martin Bastian
|
Not avalaible |
S18-464
Oral
|
Influence of Temperature on the Flowability of Polymer Powders in Laser Sintering
Michael Van den Eynde, Leander Verbelen, Peter Van Puyvelde
|
S18-465
Oral
|
SLS surfaces: new insights
Marc Vetterli, Konrad Wegener, Manfred Schmid
|
Not avalaible |
S18-23
Oral
|
Quality Improvement of FDM Parts by Parameter Optimization
Frederick Knoop, Agnes Kloke, Volker Schoeppner
|
S18-545
Oral
|
The Influence of PLA Composite Filaments on Molding Product made by Three-dimensional Printing
Kunihiro ARAKI, Goshi HAMABE, Keishi DATE, Tatsuya TANAKA
|
S18-91
Oral
|
FDM Bond Strength: Experiments and Simulations Based on Healing Models
Timothy J. Coogan, David Kazmer
|
S18-560
Oral
|
Multi-Layered Infill Structures in FDM of thermoplastics
Michael James Hebda, Philip Caton-Rose, Ben Whiteside, Philip Coates
|
Not avalaible |
S18-573
Oral
|
New approaches towards production of polymer powders for selective laser beam melting of polymers
Jochen Schmidt, Marius Sachs, Stephanie Fanselow, Karl-Ernst Wirth, Wolfgang Peukert
|
S18-176
Oral
|
Insights into the development of a short fiber reinforced polypropylene for laser sintering
Rob Kleijnen, Jens Sesseg, Manfred Schmid, Konrad Wegener
|
S18-20
Oral
|
Nanomanufacturing Processes for Printed Polymer Structures
Joey Mead, Carol Barry
|
Not avalaible |
S18-221
Oral
|
3D-Printing of virgin polypropylene: the effect of temperature control on crystallinity and shrinkage.
Nicolas Van Damme, Tom Claessens, Kim Ragaert
|
Not avalaible |
S18-631
Oral
|
Highly filled self-assembled nanocomposites containing Layered Double Hydroxides (LDH) nanoparticles
Nelson Marcos Larocca, Luiz Antonio Pessan
|
S18-699
Oral
|
Process Monitoring by Thermography during Fused Deposition Modeling
Gerhard Traxler, Thomas Koepplmayr
|
S18-533
Oral
|
New opportunities offered by Freeformer 3D printing process
Sébastien Charlon, Jeremie Soulestin, Marie-France Lacrampe, Patricia Krawczak
|
Not avalaible |
S18-650
Poster
|
Layer strength of FDM type 3D printed article for nozzle temperature and filament material
Min-Young Lyu, J. H. Park, S. J. Park, K. H. Lee
|
S18-762
Poster
|
Reinforcement of Thermoplastic Polymer Materials with Self-Assembly Fiber
Yueh-Shin Liu
|
Not avalaible |
PPS CONFERENCES PROCEEDINGS