PPS Conferences Proceedings
       
Home > PPS-31 (2015) > S06 - (General Session 6) Morphology and Structural Development
Name of Symposia: S06 - (General Session 6) Morphology and Structural Development
S06-543
Keynote
Rheological Behavior and Structure Development in Thermoplastic Polyurethanes During High-Temperature Annealing
Joao Maia, Jesse Gadley, Ricardo Andrade
S06-75
Keynote
Process induced morphology of irradiated HD-PE
Regine Boldt, Uwe Gohs, Manfred Stamm, Gert Heinrich
S06-689
Keynote
Mutual Effects of Flow and Crystallization: Analysis of Morphology Development and Hardening in a Polypropylene
Roberto Pantani
Not avalaible
S06-688
Keynote
In-situ Follow up of Dispersion-distribution of Clay in Polymer Nanocomposites
Mosto Bousmina, H. Attayebi, F. Mighri
S06-687
Keynote
Miniaturization is a Trend but How Does it Affect the Break-up and Coalescence of Droplets in Shear Flow?
Paula Moldenaers, Pieter De Bruyn, Anja Vananroye, Ruth Cardinaels
S06-53
Keynote
Lateral Ordering in Block Copolymers: Influence of Topography, Solvent and Chain Topology
Thomas Paul Russell
S06-96
Oral
Design and Scale-up of a Semi-Industrial Downer-Reactor for the Rounding of Irregular Polymer Particles
Marius Sachs, Jochen Schmidt, Wolfgang Peukert, Karl-Ernst Wirth
S06-37
Oral
Influence of Calcium Carbonate and Carbon Nanotubes on the Crystallization Kinetics of Polypropylene at High Supercooling
Juergen E.K. Schawe
S06-147
Oral
Modeling Flow-induced Morphology in Injection Molded Polypropylene Samples
Vito Speranza, Roberto Pantani, Giuseppe titomanlio
Not avalaible
S06-332
Oral
Preparation and characterization of modified-TiO2/PLA nano-composites with enhanced photo-biodegradability
Kamand Rabiei Tabriz, Ali Asghar Katbab
S06-322
Oral
Study on the Morphology and Mechanical Properties of PE/PS/GO Nanocomposites
mehdi sharif
Not avalaible
S06-451
Oral
Compatibilizing role of organoclay on morphology development and its influence on toughening enhancement of plasticized PLA/ESO blends.
Zahra Yagoobi, Hossein Nazockdast, Fatemeh Goharpey
S06-307
Oral
Performance and Processability Improvement of Poly(propylene carbonate) Films by Incorporation of Chain Extenders
Natthapon Orn-imsin
S06-378
Oral
Optimization of Cellular Morphology of PP/CaCO3 and PP/talc Based Films Developed by Post-extrusion Biaxial Stretching
Frej Mighri
S06-218
Oral
Morphological evolution and toughening mechanism of alternating multilayered materials with unique impact behavior and toughness based on polypropylene and poly (ethylene-co-octene)
Hong Wu, Jianfeng Wang, Chunhai Li, Shaoyun Guo
S06-165
Oral
A Novel Preparation Method of Glass Fabric- Reinforced Epoxy Resin Composites
Yuan Liu, Jun Jiang, Qi Wang
S06-316
Oral
Relationship between Rheology, Morphology and Electrical Conductivity of ABS/PPy Nanocomposites
amirhosein mohagheghi
Not avalaible
S06-521
Oral
Relationship between Morphology and Electrical Properties of Polypyrrole/Graphene Oxide (PPy/GO) Nanocomposites
katayoun amirazodi
Not avalaible
S06-537
Oral
Relationship between Morphology and Electrical properties of Polythiophene/Graphene oxide (PThs/GOs) Nanocomposites
mehrdad bahrani
S06-540
Oral
Optical birefringence versus banding structure in the spherulite of poly(trimethylene terephthalate)
Graecia Lugito, Eamor M. Woo
Not avalaible
S06-610
Oral
NUCLEATION OF GAMMA FORM IN ISOTACTIC POLYPROPYLENE UNDER HIGH PRESSURE IN NON-ISOTHERMAL CONDITIONS
Przemyslaw Sowinski, Ewa Piorkowska, Séverine A.E. Boyer, Jean-Marc Haudin
S06-292
Poster
Morphology Study of Block Copolymer Confined in AAO Template Treated by Tilt Metal Deposition
Mooseong Kim, Gumhye Jeon, Seung Hyun, Kyuseong Lee, Jongheon Kwak, Dusik Bae, Jin Kon Kim
S06-150
Poster
Molding condition dependence of mechanical properties of waste of packaging plastic
Nozomi Takenaka, Naoto Oda, Aya Tominaga, Hiroshi Sekiguchi, Ryoko Nakano, Shigeru Yao, Eiichi Takatori
S06-151
Poster
Understanding of the formation of a continuous sheath structure for PS phase in tri-continuous PVDF/PS/HDPE blends
Rui Dou, Bo Yin, Mingbo Yang
S06-664
Poster
Uniaxial Stretching Behavior of Polylactide with Different Initial Crystalline Morphologies
Jianye Liu, Shijun Zhang, Liying Zhang, Liqiu Chu, Lizhi Liu, Yiqing Bai
S06-636
Poster
Treatment of Cationic Starch Polymer on Cotton Fabric for Eco-Friendly Dyeing
Shamshad Ali, Seong Hun Kim
S06-253
Poster
Morphology Map of Nanoparticle-filled PP/PS Blends under Slow Shear Flow: Competitive Role of the Nanoparticle to the Dispersed Phase Weight Ratio
Miqiu Kong, Guanglian Chen, Yajiang Huang, Jie Yang, Guangxian Li
S06-258
Poster
Transcrystallization of β-crystal in Multilayered β-nucleated Polypropylene and Polypropylene Composites
Shuo Yang, Jiang Li
S06-264
Poster
Photo-Induced Order-Order Phase Transition of Miktoarm Block Copolymer Containing UV cleavable linker
Chungryong Choi, Jicheol Park, Jongheon Kwak, K.L. Vincent Joseph, Jin Kon Kim
S06-267
Poster
Complementary Multiple Hydrogen Bonds Mediate the Phase Behavior of Block Copolymer blends having Nucleobase-Functionalized Block
Eunseol Kim, Jin Kon Kim
S06-440
Poster
Formation of Highly Asymmetric Lamellar Microdomains in Binary Blend of Asymmtric Block Copolymers Having Hydrogen Bonding
Jongheon Kwak, Sung Hyun Han, Hong Chul Moon, Jin Kon Kim, Jaseung Koo, Jeong-Soo Lee, Victor Pryamitsyn, Venkat Ganesan
S06-290
Poster
Understanding the effect on the morphology of Halloysite as a second filler in PP/Graphene nanocomposites
Douglas Alexandre Simon, Eveline Bischoff, Tales Daitx, Luana Benetti, Raquel Santos Mauler
S06-466
Poster
Synthesis and Characterization of A2B-Type Miktoarm Star Copolymer Composed of Poly(3-dodecylthiophene) and Poly(methyl methacrylate)
Jicheol Park, Hong Chul Moon, Chungryong Choi, Jin Kon Kim
S06-295
Poster
Morphology variations of polymer composites during multistage stretching extrusion and the effect on the drug release behavior
Rong Chen, Xia Chen, Cong Zhang, Shaoyun Guo
S06-606
Poster
Effects of structural regularity of thiophene-based copolymers on molecular ordering and charge transport
SUNG YUN SON, Yebeol Kim, Taiho Park
S06-345
Poster
Rheological properties and morphology of PVA/CuNW suspension with or without silica under the LAOS flow
Seung Hak Lee, Kyu Hyun
S06-526
Poster
Growth of Spherulite in Injection Molding of Semicrystalline Polymer
HeeSoo Shim, JiSeon Hong, Sun K. Kim
Not avalaible
S06-524
Poster
Filling Eccentricity in Micro-Injection Molding of Semicrystalline Polymer
JiSeon Hong, HeeSoo Shim, Sun K Kim
Not avalaible
S06-284
Poster
The Effect of the Morphology on the Anisotropic Light Scattering of PC/SAN Blend
Ying Xiong, Xianming Dong, Shaoyun Guo