Name of Symposia: S10 - Injection Molding |
S10-252 Oral
|
Estimation of Thermal Contact Resistance at Polymer Melt and Mould Surface Interface in Microinjection Moulding Maksims Babenko
|
S10-344 Oral
|
Numerical Prediction of Fiber Orientation in Injection-molded Short-fiber/Thermoplastic Composite Parts with Experimental Validation Thanh Binh Nguyen Thi, Mizuki Morioka, Atsushi Yokoyama, Senji Hamanaka, Katsuhisa Yamashita, Chisato Nonomura
|
S10-9 Oral
|
Influence of Process Parameters on Wall Thickness Distribution during the Initial Step of the Direct GITBlow Process Stefan Seidel, Elmar Moritzer
|
S10-331 Oral
|
Optimum Design Method for Injection Molding Die using Mixed Approximation Method Atsushi YOKOYAMA, Yuichi KUBOTA
|
Not avalaible |
S10-1 Oral
|
Long Fiber Breakage Simulations for Injection Molded Fiber-Reinforced Thermoplastics: Processing From Screw to Part Huan-Chang Tseng
|
S10-32 Oral
|
Design and Verification of an In-Mold Multivariate Sensor David Owen Kazmer, Guthrie W Gordon, Robert X Gao, Zhaoyan Fan, Xinyao Tang
|
S10-274 Oral
|
Shear-Induced Crystallization of Poly(lactic acid) and Its Realization in Injection Molding Huan Xu, Lan Xie, Hua-Dong Huang, Yuan-Ying Liang, Gan-Ji Zhong, Zhong-Ming Li
|
S10-273 Oral
|
Evaluation of vacuum venting and variotherm process for improving the replication by injection moulding of high aspect ratio micro features for biomedical applications Marco Sorgato, Giovanni Lucchetta
|
S10-345 Oral
|
Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process Tobias Struklec, Martin Burgsteiner, Thomas Lucyshyn, Werner Balika, Stefan Moderegger, Clemens Holzer
|
S10-261 Oral
|
The Shrinkage Behavior and Surface Topographical Investigation for Micro Metal Injection Molding A. Islam, N. Giannekas, D. M. Marhöfer, G. Tosello, H. N. Hansen
|
S10-340 Oral
|
Non-invasive Ultrasound Based Temperature Measurements at Reciprocating Screw Plastication Units : Methodology and Applications Klaus Straka, Bernhard Praher, Georg Steinbichler
|
S10-234 Oral
|
Analysis of Cavity Pressure and Warpage of POM Thin Walled Injection Molded Parts: Experiments and Simulations Patrick Guerrier, Guido Tosello, Jesper Henri Hattel
|
S10-231 Oral
|
Investigation of the influence of different coatings on filling behavior and replication quality of microstructures in injection molding Martin Burgsteiner, Florian Müller, Thomas Lucyshyn, Christian Kukla, Clemens Holzer, Dieter Gruber, Johannes Macher, Gernot Pacher
|
S10-229 Oral
|
Experimental confirmation of diffusion processes in multi-component injection molding Clemens H. Holzer, Thomas Kisslinger, Katharina Bruckmoser, Thomas Lucyshyn, Guenter Ruediger Langecker, Katharina Resch
|
S10--20 Oral
|
Injection Molding of Biodegradable Balloon-expandable Self-locking Polycaprolactone Stents as Buckling Explants for the Treatment of Retinal Detachment Yi-Jie Peng, Yu-Ting Lu, Shih-Jung Liu
|
S10-157 Oral
|
YIELD, IMPACT AND FRACTURE PERFORMANCE OF INJECTED METALLIC LOOKING PP PARTS Maria Alejandra Costantino, Antonio Pontes, Valeria Pettarin, Patricia Frontini
|
Not avalaible |
S10-146 Oral
|
Injection moulding of optical functional micro structures using laser structured, PVD coated mould inserts Christian Hopmann, Weber Mathias, Maximilian Schöngart, Christian Schäfer
|
S10-136 Oral
|
Influence of thermal conductivity of PP-based compounds on surface roughness of rapid heat cycle injection molded parts Gernot Alois Pacher, Bernd Geissler, Gerald Roman Berger, Johannes Macher, Walter Friesenbichler, Dieter Paul Gruber
|
S10--12 Oral
|
Artificial neural networks to model formulation-property-connections in the process of inline-compounding on an injection moulding machine Elmar Moritzer, Yannick Martin, Ellen Müller, Rainer Kleeschulte
|
S10-267 Oral
|
Stem Cell Response to Surface Energy Anisotropy Matthias Katschnig
|
S10-546 Oral
|
Numerical Simulation of single stage injection blow moulding process Jordan Biglione, Yves Bereaux, Jean-Yves Charmeau, Jean Balcaen, Sambor Chhay
|
S10-88 Oral
|
Polymer/Metal Direct Joining by Precise Injection Molding Process Shuhei Nakamura, Tetsuo Takayama, Kentaro Taki, Hiroshi Ito
|
S10-69 Oral
|
Rapid hot embossing of polymer microstructures with high aspect ratios using carbide-bonded graphene coating on silicon stampers Pengcheng Xie, Eusebio Duarte Cabrera, Panpan Zhang, Ying-Chieh Yen, Peng He, Daniel Gallego-Perez, Lingqian Chang, Allen Yi, Jose Castro, L.James Lee
|
S10-67 Oral
|
Graphene Coating Assisted Injection Molding of Ultra-thin Thermoplastics and Composites Eusebio Duarte Cabrera, Panpan Zhang, Ying-Chieh Yen, Jiangfeng Yu, Wei-ching Liao, Jose Castro, L.James Lee
|
Not avalaible |
S10-327 Oral
|
Nucleation and Shelf Life Enhancing Additives for a Novel Foam Injection Molding Process Using Gas-Laden Pellets Lih-Sheng Turng, Xiaofei Sun
|
Not avalaible |
S10-594 Oral
|
Thermal optimization of porous mold inserts for rapid heat cycle molding Luca Crema, Giovanni Lucchetta
|
S10-543 Oral
|
IN-LINE VISUALIZATION OF POLYMER PLASTICATION WITH A TRANSPARENT BARREL IN INJECTION MOULDING thuy-linh pham, Jean Balcaen, yves bereaux, Jean-Yves Charmeau, sambor Chhay
|
S10-51 Oral
|
Electrical and Dielectric Properties of Foam Injection-Molded Polypropylene/Multiwalled Carbon Nanotube Composites Aboutaleb Ameli, Mohammadreza Nofar, Mehdi Saniei, Nemat Hossieny, Chul B Park, Petra Pötschke
|
S10-507 Oral
|
Influence of processing and structure-properties relations for Polyamide 6 Emanuele Parodi
|
Not avalaible |
S10-471 Oral
|
Crystalline behavior of a micro-injection molded gear of reactive extrusion modified PP Shi-Wei WANG, Bo SUN, Qian LI, Chang-Yu SHEN, Guo-Hua HU
|
S10-421 Oral
|
3D-detection of short carbon fibers and their distribution in injection molded thermoplastic parts Christian Johann Bodor, Roland Brunner, Daniel Tscharnuter, Joerdis Rosc, Walter Friesenbichler
|
Not avalaible |
S10-414 Oral
|
CONTRACTING, EXPANDING FLOWS EFFECTS ON MORPHOLOGY OF MICRO-INJECTION MOLDED POLYOXYMETHYLENE Musa R. Kamal, Abdessalem Derdouri, Rabie El-Otmani
|
Not avalaible |
S10-390 Oral
|
Determination of a robust process setting for an injection molded mirror drive component using D-Optimal DoE Gerald R. Berger, Walter Friesenbichler, Hans-Juergen Luger, Irmgard Beytollahi , Michael Gierth, Paul Filz
|
S10-369 Oral
|
Process evaluation of foam injection molding with chemical and physical blowing agents for fiber reinforced thermoplastics Alexander Roch, Timo Huber, Lara Kehret, Tobias Potyra, Frank Henning, Peter Elsner
|
S10-387 Poster
|
Three-dimensional numerical simulation of filling imbalance in powder injection molding Tae Gon Kang, S.J. Park, S.T. Chung, Y.S. Kwon
|
Not avalaible |
S10-36 Poster
|
Hierarchical Assembly of Micro-/Nano-Building Supermolecular Blocks: Unprecedented Access to Super-Strong Poly(lactic acid) Huan Xu, Lan Xie, Zi-Jing Zhang, Xu-Juan Li, Jing-Bin Chen, Hua-Dong Huang, Yue Li, Gan-Ji Zhong, Zhong-Ming Li
|
S10-71 Poster
|
Study on Filling Imbalance in Geometrically Balanced Runner Systems Krzysztof Wilczyński, Krzysztof J. Wilczyński, Przemysław Narowski
|
S10-703 Poster
|
Rapid control of mold temperature during injection molding process Sara Liparoti, Tsang Min Hunag, Andrea Sorrentino, Giuseppe Titomanlio, Mukerrem Cakmak
|
S10-148 Poster
|
Development of a novel approach for the simulation of the foam injection moulding process Christian Hopmann, Mathias Weber, Daniel Sander
|
Not avalaible |
S10-170 Poster
|
Effect analysis for compensating viscosity fluctuations by means of a self-optimising injection moulding process Christian Hopmann, Mathias Weber, Axel Reßmann
|
S10-175 Poster
|
Anisotropic electrical conductive polymer composites with alternating multilayer structure prepared through high speed thin wall injection molding Feilong Yu, Hua Deng, Qin Zhang, Ke Wang, Chaoliang Zhang, Feng Chen, Qiang Fu
|
S10-654 Poster
|
β-cylindrites of polypropylene emerged in the melt penetrating process of iPP into HDPE Rui-yan Zhang, Wei Yang, Zheng-ying Liu, Ming-bo Yang
|
S10-193 Poster
|
Development and Accuracy Verification of the Polymer PVT tester with high pressure and high cooling rate Yuelin Li, Le Song, pengcheng xie, Yumei Ding, Weimin Yang
|
S10-477 Poster
|
Effect of reprocessing cycles on the degradation of polypropylene copolymer filled with talc or montmorillonite during injection molding process. Renan Demori, Vandro Felipe Weschenfelder, Elisa Ashton, Luis Henrique Alves Cândido, Wilson Kindlein, Raquel Santos Mauler
|
S10-216 Poster
|
High-Performance Poly(butylene adipate-co-butylene terephthalate)/Thermoplastic Starch Biodegradable Blends Fabricated by Oscillation Injection Molding Xu-Juan Li, Zhong-Ming Li, Rong Ran, Gan-Ji Zhong, Jian-Ping Ding
|
S10-355 Poster
|
Mold temperature control during injection molding process Przemyslaw Postawa, Tomasz Stachowiak
|
S10-318 Poster
|
Clamping Characteristics Study of Different Types of Clamping Unit Zhiwei Jiao, Haichaoiu Liu, Pengcheng Xie, Weimin Yang
|
S10-192 Poster
|
The research of UV curing injection molding Pengcheng xie, Le Chang, Le Song, Tianze Cai, Yumei Ding, Weimin Yang
|