PPS Conferences Proceedings
       
Home > PPS-28 (2012) > O-04 - Injection and Microinjection Molding and Molds
Name of Symposia: O-04 - Injection and Microinjection Molding and Molds
KN-04-01
Keynote
Micro-and Nano-scale Polymer Processing Top-down Approach as Injection Molding and Imprinting Technology
H. Ito, A. Hariu, S. Takahagi, T. Takayama, T. Kyotani
Not avalaible
O-04-350
Oral
Influence of Dynamic Mold Temperature Processes on the Weld Line Strength of Bi-Directional Filled Tensile Bars. A New Multi-functional Test Injection Mold to Examine Surface Defects, Thin-Wall Parts and Frozen Layer Formation
G.R. Berger, G.A. Pacher, W. Friesenbichler
Not avalaible
O-04-057
Oral
Achieving Fine Cell Structure of Polypropylene Foam with High Expansion Ratio by Core-back Foam Injection Molding
Shunya Yasuhara, Ryoma Miyamoto, Masahiro Ohshima
Not avalaible
O-04-122
Oral
Wireless In-mold Sensor for Injection Molding: A New Approach
Florian Müller, Christian Kukla, Thomas Lucyshyn, Clemens Holzer
Not avalaible
O-04-145
Oral
Influence of Masterbatches on the Bond Strength of Two-Shot Molded Parts
Thomas Kisslinger, Thomas Lucyshyn, Guenter Ruediger Langecker, Clemens Holzer
Not avalaible
O-04-165
Oral
Demolding Force Measurements of Coated Micro-Structured Surfaces in a Hot Embossing Process
Tobias Struklec, Martin Burgsteiner, Thomas Lucyshyn, Werner Balika, Christian Pöschl, Clemens Holzer
Not avalaible
O-04-193
Oral
High Precision in Shrinkage Simulation of Thick-Walled Plastic Parts due to Improved Material Data
Natalie Rudolph, Martin Löhner, Dietmar Drummer, Tim Osswald
Not avalaible
O-04-199
Oral
Inline-Compounding of Fibre Reinforced Thermoplastics on an Injection Moulding Machine
Ellen Albring, Elmar Moritzer, Rainer Kleeschulte
Not avalaible
O-04-205
Oral
Mechanical Property of Injection Molded Untwisted Jute/PP with Weld Line
Wang Cuntao, Yuqiu Yang, Hiroyuki Hamada
Not avalaible
O-04-217
Oral
Visualization Analysis of Discontinuous Wrinkly Grooves Generation Process behind Micro Saw-Tooth Steps Pattern
Yoshinori Kanetoh, Hidtoshi Yokoi
Not avalaible
O-04-247
Oral
Visualization Analysis on Flow Behavior of Long Carbon Fiber Reinforced Materials in Injection Molding
Hidetoshi Yokoi, Ryosuke Mori, Yoshinori Kanetoh
Not avalaible
O-04-036
Oral
Experimental and Numerical Analysis of the Temperature Distribution of Injection Molded Products Using Protruding Microprobes
Shih-Jung Liu, Chia-Wei Ho
Not avalaible
O-04-315
Oral
Replication of Microstructured Freeform Surface Parts in Injection Molding
Martin Burgsteiner, Florian Müller, Archim Wolfberger, Thomas Lucyshyn, Christian Kukla, Clemens Holzer
Not avalaible
O-04-394
Oral
Real-Time VIS Spectroscopic Monitoring of Colour during Injection Moulding
P.Brookbank, O.Ghita
Not avalaible
O-04-431
Oral
Investigation of Sandwich Structure Using PP Blends as Skin and xHDPE Core
Thnatiwat Norraprateep, Utai Meekum
Not avalaible
O-04-442
Oral
Visualization Analysis of Imbalanced Cavity Filling Phenomena in Hot Runner Mold with a Valve-gate System
Ryohei Takamatsu, Yoshinori Kanetoh, Hidetoshi Yokoi
Not avalaible
O-04-506
Oral
Influence of High Shear Rates on the Microstructure of Injection Molded POM/PDMS Compounds
Johanna Aho, Nicolas Javier Alvarez, Mogens Papsoe, Ole Hassager
Not avalaible
O-04-539
Oral
The Effects of Gas Counter Pressure Combined with Dynamic Mold Temperature Control on the Skin Layer Thickness and Foaming Cell Size of Microcellular injection Molding
Shia-Chung Chen, Jen-An Chang, Chia-Yen Tseng
Not avalaible
O-04-553
Oral
Study on Resin Flow of Micro Injection Molding Machine
Akira Inoue, Masayoshi Nomoto, Tatsuya Tanaka, Yoshihiko Arao
Not avalaible
O-04-556
Oral
Interface Adhesion of Thermoplastic Polyurethane/ Acrylonitrile-Butadiene-Styrene: Relationship between Injection Molding Parameters and Debonding Strength
Daniel Valentin Dobrea, Stan Felicia, Catalin Fetecau
Not avalaible Not avalaible
O-04-596
Oral
Microcellular Injection Molding with Gas-Laden Pellets: Effects of Co-Blowing Agents on Microstructure
Xiaofei Sun, Lih-Sheng Tunrg
Not avalaible
O-04-630
Oral
Optimization Parameters of Injection Moulding Machine for Reducing Warpage of Dog Bone Plastic Part
Mohd Amran, Siti Salmah, Mohamad Zaki, Raja Izamshah, Mohd Hadzley, Sivarao Subramonian, Nur Izan Syahriah
Not avalaible
O-04-313
Oral
Injection Moulding of Micro Structures on Complex Part Geometries
Ch. Hopmann, A. Neuss, M. Schoengart
Not avalaible