Name of Symposia: G12 - Process Modeling and Simulation |
G12- 534 Keynote
|
3D Finite Element Solution of the Flow in Single and Twin-Screw Extruders Hétu Jean-François, Ilinca Florin
|
G12-198 Keynote
|
Prediction of Swell Phenomenon using Adaptive Local Mesh Refinement and Weight Optimization Procedure in Extrusion Blow Molding Process Benrabah Zohir, Thibault Francis, DiRaddo Robert
|
G12-656 Keynote
|
Suspension Flow Modeling for General Geometries, Morris Jeff
|
Not avalaible |
G12-255 Oral
|
Orientational Behavior of the Binary Carbonaceous Mesophase Mixtures under the Extensional Flow Golmohammadi Mojdeh, Rey Alejandro D
|
G12-35 Oral
|
Issues in the Modeling of Paste Extrusion Mitsoulis Evan, Zisis Thanasis, Hatzikiriakos Savvas G.
|
G12-657 Oral
|
Thermal Stresses and Birefringence in Tubes and Multi-Layered Polymer Slabs: Theory and Experiment Isayev Avraam I, Carrillo Antonio J, Kim Nam Hyun
|
Not avalaible |
G12-165 Oral
|
Simulation of the Melting Process for Barrier-Flighted Single-Screw Extruders Using Screw Rotation Physics Campbell Gregory A, Spalding Mark
|
G12-360 Oral
|
A New Type of Mixer Based on Elongational Flow: Numerical Simulation and Flow Visualization Loux Cyril, Bouchet Gilles, Muller Rene, Bouquey Michel
|
G12-699 Oral
|
The Effect of Wall Slip in 4:1 Contraction Flows of a PTT Fluid Ferras Luis Lima, Pinho Femando Taveres, Carneiro Olga Sousa, Nobrega Joao Miguel
|
Not avalaible |
G12-124 Oral
|
Modeling Chemically Blown Foam Expansion Using the Finite Element Method Rao Rekha Ranjana, Mondy Lisa Ann, Celina Mathew, Adolf Douglas, Kropka Jaime, Russick Edward
|
G12-424 Oral
|
Vapor Sorption Isotherm by Different Biopolymers and Polymers Ugrozov Valery Vycheslavovich
|
G12-23 Oral
|
Improved Performance and Product Quality by Automated Geometry Optimization of Extrusion Dies Wortberg Johannes, Saul Kenny
|
G12-18 Oral
|
The Mesoscopic Constitutive Equations for Polymeric fluids and some Examples of Flows Gusev Alexsei, Afonin Grigory, Tretjakov Ilia, Pyshnogray Grigory
|
G12-285 Oral
|
Experimental and Numerical Study of Transcriptability of Micro Structured Surface in Injection Molding Lee Jae Gu, Rha Moonwoo, Kang Tae Gon, Kwon Tai Hun
|
G12-330 Oral
|
Determination of the Transition Temperature at Different Cooling Rates and its Influence on Prediction of Shrinkage and Warpage in Injection Moulding Simulation Lucyshyn Thomas, Knapp Gilbert, Holzer Clemens
|
G12-379 Oral
|
Extended Finite Element Method for Flow Inside Twin-Screw Extruders Sarhangi Fard Arash, Hulsen Martien A., Meijer Han E.H., Anderson Patrick D.
|
G12-565 Oral
|
Modeling of Reactive Extrusion: a New Method. Application to PLA Puaux Jean-Pierre, Banu Ionut, Bozga Grigore, Nagy Iosif
|
G12-629 Oral
|
Analysis of a Split and Recombine Mixer for Polymer Melts Phelan Jr. Frederick R., Moon Doyoung, Migler Kalman B.
|
G12-129 Oral
|
Preliminary Efforts in Simulation of Molding of a Polypropylene Melt Reinforced with Long Glass Fibers using Transient Shear Rheology Ortman, K.C., Neeraj Agarwal, D.G. Baird, P. Wapperom, Jeffrey Giacomin
|
G12-658 Oral
|
Drainage in Foams with Surfactant-Covered Interfaces Galea I.J., Loewenberg Michael
|
G12-695 Oral
|
A Hyperelastic Damage Model for Continuous Fiber Reinforced Thermoplastic Composites: Formulation and Numerical Simulations Chaouki Hicham, Gakwaya Augustin, Erchiqui Fouad, Fafard Mario
|
Not avalaible |
G12-22 Oral
|
A Calibrated Integrative Simulation Model for Blown Film Extrusion M. Bussmann, M. Janas, J. Wortberg
|