PPS Conferences Proceedings
       
Home > PPS-17 (2001) > S16 - ENGINEERING OF COMPOSITE MATERIALS
Name of Symposia: S16 - ENGINEERING OF COMPOSITE MATERIALS
S01-140
Oral
Flow Instability And Electrical Conductivity Of Composites Of Hard Metal Carbides In Polymer Matrix
J. Vilcáková, P. Sáha, B. Hausnerová, O. Quadrat
Not avalaible
S01-166
Oral
Fracture energy fluctuations of reinforced thermoplastic composites
Fernando Gonzalez, Constantin Chassapis
Not avalaible
S01-131
Oral
Determination of the interfacial shear strength flax fibre - thermosetting polyester. Influence of chemical treatments (NaOH, acetic anhydride)
C.Baley, C. Pomel, B. Lamy, G. Levesque
Not avalaible
S01-75
Oral
Anisotropic phase formation of maleated polypropylene-layered silicate nanocomposites In Jae Chung, Chong Min Koo, Hyeong Taek Ham, Ki Hyun Wang, Sang Ouk Kim, Dae-Cheol
Kim, Wang-Cheol Zin
Not avalaible
S01-365
Oral
Effects of Fiber Orientation on The Weld Line Strength of Injection Molded PA/GF Composites
Joaquim Cintra Jr, Lisiane Giusti
Not avalaible
S01-31
Oral
A Theoretical Model for Prediction of Mechanical Behavior of Particulate Composites and its Evaluation
Ahmad Ramazani Saadatabadi, Mahdi Ebrahimi
Not avalaible
S01-415
Oral
Organic/Inorganic Hybrid Composites : Polymerization Compounding and Controlled Free Radical Polymerization
A. Kasseh, A. Ait-Kadi, B. Riedl, J.F. Pierson
Not avalaible
S01-141
Oral
Temperature Dependent Flow Instabilities of Highly Filled Polymer Compounds
Tomas Honek, B. Hausnerova, P. Saha
Not avalaible
S01-57
Oral
Mold Filling Characteristics of Ceramic Injection Molding Mixtures
Kenji Okada, Youichi Nagase
Not avalaible
S01-133
Oral
A study on the interaction between fiber contents and properties of injection molded GF/PP composite plates
N.M.Neves, A.J.Pontes, A.S.Pouzada
Not avalaible
S01-71
Oral
Development of Novel Composites by Hot Compaction
Ian M.Ward, P.J. Hine, B. Brew, M. Bonner
Not avalaible
S01-66
Oral
Preparation and characterisation of biodegradable starch/PCL nanocomposite packaging materials
Stewart McGlashan, Peter Halley
Not avalaible
S01-377
Oral
Injection Moulding of Polymer/Clay Nanocomposites
E. Turcott, A. Garcia-Rejon, Y. Simard
Not avalaible
S01-98
Oral
Fiber orientation in short flow length parts: limitations of current predictions
Charles L. Tucker III, Henry M. Huynh
Not avalaible
S01-76
Oral
Rheology and crystallization behaviors of maleated polypropylene/clay nanocomposites
Chong Min Koo, Mi Jung Kim, Min Ho Choi, Sang Ouk Kim, In Jae Chung
Not avalaible
S01-289
Oral
Preparation and mechanical properties of polypropylene composites reinforced with combinations of continuous glass fiber and mica
Ruofei Zhao, Gance Dai
Not avalaible
S01-343
Oral
Polymerization Compounding Thermoset Composites: Application to Polyurethane/Fumed Silica
Abdellatif Ait-Kadi, Charles Dubois
Not avalaible
S01-60
Oral
Studies On PA6 Organic Rigid Particle Filled PP System
Qi Wang, Zhe Chen
Not avalaible
S01-270
Oral
Is Darcy's law a correct approximation for RTM modelling ?
F. Boust, R. Torres, A. Poitou
Not avalaible
S01-338
Oral
Articulated Resin Transfer Molding
J.-H. Choi, C. K. H. Dharan
Not avalaible
S01-160
Oral
Resin Flow during the Consolidation of Woven of Commingled Roving
D. Pagé, P. Bates, T. Bui, H. Bonin
Not avalaible
S01-255
Oral
Permeability Prediction for Industrial Textile Preforms
F. Robitaille, A. Long, C. Rudd
Not avalaible
S01-253
Oral
Optimization of Gate Location during Liquid Composite Mold Filling Processes using Hybrid Real Coded Genetic Algorithms
Roopesh Mathur, Suresh G. Advani, Bruce Fink
Not avalaible
S01-298
Oral
Discussion of a Closure Model for Flow-Induced Alignment of Fibers
D. Mandal, S. Parks, C. Petty, A. Bénard
Not avalaible
S01-267
Oral
Measurement and FE prediction of glass fibre orientation distributions for injection moulded products of increasing complexity
B.R. Whiteside, P. D. Coates, S.L. Bubb, R.A. Duckett & P.J. Hine
Not avalaible
S01-24
Oral
Fiber Orientation Control of Short-Fiber Reinforced Thermoplastics
by Ram Extrusion Y. Sanomura, M. Kawamura
Not avalaible
S01-137
Oral
Experimental Analysis and Computer Simulation of Pultrusion and Injection Pultrusion Processes
Zhongman Ding, Shoujie Li, Liqun Xu, L. James Lee, Herbert Engelen
Not avalaible
S01-328
Oral
Effects of Polymer Chains/Fine Particles Adsorption on Macroscopic Properties
B. Haidar, K. Vuillaume, A. Vidal
Not avalaible
S01-224
Oral
Preparing fire retardant Polypropylene-Clay-Nanocomposites by compounding
Udo Wagenknecht, Bernd Kretzschmar, Gerd Reinhardt
Not avalaible
S16-54
Oral
Numerical Simulation of Contraction and Expansion Flows of Langmuir Monolayers
Evan Mitsoulis, Kostas Missirlis, John Argyropaidas
Not avalaible
S16-317
Oral
Simulation And Experimental Results For Polymer Melt In Planar Hyperbolic Dies
P. Olley, M.T. Martyn, R. Spares, D. Groves, P.D. Coates
Not avalaible
S16-251
Oral
Modeling a Reactive Extrusion In a Twin-Screw Extruder
Jean-Pierre Puaux, Philippe Cassagnau
Not avalaible
S16-146
Oral
Three Dimensional Simulation of Axial Circle Flow Field In Non-Intermeshing TSE
Xiaozheng Geng, Xiuqing Ma
Not avalaible
S16-144
Oral
3D Flow Field Analysis of Combined Channel (KB plus Screw Bushing) in Co-Rotating TSE
Peng Li, Xiaozheng Geng
Not avalaible
S16-113
Oral
Development of Constitutive Equations for Solid Phase Deformation of Polymers With Time-Varying Temperature
P. Caton-Rose, J. Sweeney, A.S.Wood, G.F. Rosala, P. D. Coates
Not avalaible
S16-101
Oral
Optimum design technique for injection molding considering productivity
Akio Takafuji, Takahiro Kubo, Atsushi Yokoyama, Hiroyuki Hamada
Not avalaible
S16-110
Oral
Investigation of the process behavior of special mixing elements in twin-screw extruders
H. Potente, K. Kretschmer, J. Hofmann, M. Senge, M. Mours, G. Scheel, Th. Winkelmann
Not avalaible
S16-371
Oral
Theoretical Analysis and Experimental Study on Microfiberillar Morphology Development in PP/TLCP Blend
Afshin Mousavi, Hossein Nazokdast, Faramarz Afshar Taromi
Not avalaible
S16-207
Oral
Three-Dimensional Numerical Modeling of Co-Injection Molding
Florin Iinca, Jean-Francois Hetu
Not avalaible
S16-212
Oral
Fast solution for 3D injection moulding by a Discontinuous Space-Time Finite element method
Thierry Coupez, Erwan Bigot, Julien Bruchon, Serge Batkam
Not avalaible
S16-254
Oral
Mechanisms of viscous fingering of non-Newtonian fluids: application to injection moulding
Brajesh Singh, Jalel Azaiez
Not avalaible
S16-261
Oral
Stability analysis of injection molding flows
Arjen Bogaerds, Anne Grillet, Gerrit Peters, Frank Baaijens
Not avalaible
S01-242
Oral
Toughening of epoxy matrix by morphology spectrum concept
Sung Chul Kim, Hyun Sung Min
Not avalaible
S16-5
Oral
Simulation of melt flow in filled and partially filled sections of a co-rotating twin screw extruder
M. Mours, M. Senge, V. Seidl, H.-G.Wagner, J. Hofmann
Not avalaible
S01-271
Oral
Effects of filler migration on mechanical properties and conductivity of filled polymers
Sadhan Jana, Chang Min Hong
Not avalaible
S16-184
Oral
Three dimensional numerical simulation of viscoelastic planar contraction flow
I. Sirakov, A. Ainser, J. Guillet
Not avalaible
S16-100
Oral
Using Truncated Relaxation Spectra in the Simulation of Viscoelastic Flows
Marie-Claude Heuzey, Paula Wood-Adams, André Fortin
Not avalaible
S16-55
Oral
Die Drawing of Polyoxymethylene: A Finite Element Analysis
M.S.Mirza, A.K.Taraiya, I.M.Ward, D.C.Barton
Not avalaible
S16-364
Oral
Nonlinear Thin Film Flow of Newtonian and Non-Newtionian Fluids
Roger E. Khayat, Kyu-Tae Kim
Not avalaible
S16-134
Oral
Simulation of the Mobile Preform Reheat in Injection Stretch Blow Moulding Process
A.Yousefi, R. DiRaddo, A. Bendada
Not avalaible
S16-105
Oral
Analysis and Modeling of Microstructure Development
Stefan Hoffmann, Walter Michaeli
Not avalaible
S16-203
Oral
Mechanical property simulation of partially oriented composites using the Elementary Volume Concept
G. Rüb, N.C. Davidson, B.Möginger, P. Eyerer
Not avalaible
S16-315
Oral
Gas assisted injection moulding: 3D finite element modelling using a pseudo concentration method and experimental validation
L. Johnson, P. Olley, P.D. Coates
Not avalaible
S01-391
Oral
Preparation and characterization of epoxy-montmorillonite nanocomposites Lixin Wang,Wei Feng, A. Ait-Kadi
Lixin Wang, Wei Feng, A. Ait-Kadi
Not avalaible
S01-366
Oral
Fibre orientation effects on mechanical anisotropy in molded hybrid composites of PP/GF/CaCO3
J. Alexandrino Sousa, Orestes A. Ferro, Joaquim Cintra Jr
Not avalaible
S01-303
Oral
Effects of various resin injection strategies on filling process in resin transfer molding
Akbar Shojaei, S. Reza Ghaffarian, S. Mohammad Hossien Karimian
Not avalaible
S01-292
Oral
Composite structure and acoustic effectiveness of polymer materials for automotive applications
H.-J. Radusch, A.Wutzler, M.H.Wagner, V. Schulze Martin Luther
Not avalaible
S16-367
Oral
Computational Study of Velocity Field In EZ Element of Buss KO-Kneader With CFD Method
M. Mehranpour, H. Nazokdast, B. Dabir
Not avalaible
S16-41
Oral
Numerical Computations of two-layer Poiseuille flow for Maxwell fluids
Patrice Laure, Rudy Valette, Yves Demay, André Fortin
Not avalaible