Name of Symposia: S13 - PROCESSING OF ELASTOMERS |
S13-330 Oral
|
The Rheological and Mechanical Properties of Blends Based on Polystyrene- Polyisobutylene-Polystyrene Triblock Copolymer and Polystyrene Prince Antony, Judith E. Puskas, Marianna Kontopoulou
|
Not avalaible |
S13-379 Oral
|
Morphology Development and Mechanical Response of Supramolecular Structures in Rubber Blends Robert H. Schuster
|
Not avalaible |
S13-102 Oral
|
A Novel Approach for Reinforcement of Elastomers by in situ Prepared Aluminum Methacrylate Zonglin Peng, Dehui Yin, Yong Zhang, Yinxi Zhang
|
Not avalaible |
S13-342 Oral
|
Dispersion of agglomerates in elastomers during shear Marianne Astruc, Steven Rusch, Sylvie Vervoort, Patrick Navard, Edith Peuvrel-Disdier
|
Not avalaible |
S13-173 Oral
|
Ultrasound Effect On Breakdown of Silica Agglomerates Kim Kwang-Jea, James White, Avraam Isayev
|
Not avalaible |
S13-329 Oral
|
Effect of Hard and Soft Segment Composition on the Morphology and Mechanical Properties of Polystyrene-Polyisobutylene Thermoplastic Elastomeric Block Copolymers Prince Antony, C. Paulo, Judit E. Puskas, H. Ott, V. Altstädt, M. Kovar, P.R. Norton
|
Not avalaible |
S13-351 Oral
|
Novel Thermoplastic Elastomers From Fluorocarbon Elastomer, Acrylate Rubber And Acrylate Plastics M. Abdul Kader, Anil K. Bhowmick
|
Not avalaible |
S13-45 Oral
|
Branched Polymer Based Tread Silica Compounds A. Amaddeo, Dario Nichetti
|
Not avalaible |
S13-352 Oral
|
Compounding of Short Fiber and Nanoparticle Reinforced Polymers L.A. Goettler
|
Not avalaible |
S13-208 Oral
|
Recycling of EPDM Rubber : Utilization of Factory Waste as Filler in Virgin EPDM Ceni Jacob, A.K.Bhowmick, S.K.De, Prajna P. De
|
Not avalaible |
S13-401 Oral
|
The Effects of ABS Characteristics on the Mechanical and Rheological Behavior and on the Phase Morphology of PBT/ABS/MMA-GMA Blends G.L. Mantovani, E. Hage, L.A. Pessan
|
Not avalaible |
S13-136 Oral
|
Effect of 1-O-Tolyl 5 phenyl 2,4 dithiobiuret/CBS system as accelerator in Rubber Vulcanization C.V. Marykutty, George Mathew
|
Not avalaible |
S13-333 Oral
|
Processability, vulcanisation behaviour and technical properties of NR/SBR blends cured with a new binary accelerator system Abi Santhosh Aprem, Sabu Thomas
|
Not avalaible |
S13-368 Oral
|
Effect of metals to oxidation and oxidizing crosslinking of rubbers I.M. Eliseeva
|
Not avalaible |
S13-331 Oral
|
EPDM-PNR Rubber Blend and its Improved Adhesion to Polyurethane Coating Milena Ginic-Markovic, Namita Roy Choudhury, Maria Provatas (nee Dimopoulos), and Janis G. Matisons
|
Not avalaible |
S13-109 Oral
|
Gas-assisted Liquid Injection Molding (GALIM) Hendrik Wehr, Edmund Haberstroh
|
Not avalaible |
S13-332 Oral
|
Polystyrene/Polybutadiene Blends: Analysis of Phase Inversion Region and Co-Phase Continuity: Comparison With Theoretical Predictions Susan Joseph, Sabu Thomas
|
Not avalaible |
S13-359 Oral
|
Transport and Dynamic Mechanical behavior and Mechanical Properties of Styrenebutadiene Rubber/Natural Rubber Blends Soney C. George, Sabu Thomas
|
Not avalaible |
S13-46 Oral
|
Viscoelastic Properties of Silica Compounds During Curing Process A. Amaddeo, Dario Nichetti
|
Not avalaible |
S13-68 Oral
|
Thermoplastic Elastomers based on Ground Waste Rubber Amit K. Naskar, Ceni Jacob, P.P. De, A. K. Bhowmick, S. K. De
|
Not avalaible |