Name of Symposia: S01 - ENGINEERING OF COMPOSITE MATERIALS |
S01-140 Oral
|
Flow Instability And Electrical Conductivity Of Composites Of Hard Metal Carbides In Polymer Matrix J. Vilcáková, P. Sáha, B. Hausnerová, O. Quadrat
|
Not avalaible |
S01-166 Oral
|
Fracture energy fluctuations of reinforced thermoplastic composites Fernando Gonzalez, Constantin Chassapis
|
Not avalaible |
S01-131 Oral
|
Determination of the interfacial shear strength flax fibre - thermosetting polyester. Influence of chemical treatments (NaOH, acetic anhydride) C.Baley, C. Pomel, B. Lamy, G. Levesque
|
Not avalaible |
S01-75 Oral
|
Anisotropic phase formation of maleated polypropylene-layered silicate nanocomposites In Jae Chung, Chong Min Koo, Hyeong Taek Ham, Ki Hyun Wang, Sang Ouk Kim, Dae-Cheol Kim, Wang-Cheol Zin
|
Not avalaible |
S01-365 Oral
|
Effects of Fiber Orientation on The Weld Line Strength of Injection Molded PA/GF Composites Joaquim Cintra Jr, Lisiane Giusti
|
Not avalaible |
S01-31 Oral
|
A Theoretical Model for Prediction of Mechanical Behavior of Particulate Composites and its Evaluation Ahmad Ramazani Saadatabadi, Mahdi Ebrahimi
|
Not avalaible |
S01-415 Oral
|
Organic/Inorganic Hybrid Composites : Polymerization Compounding and Controlled Free Radical Polymerization A. Kasseh, A. Ait-Kadi, B. Riedl, J.F. Pierson
|
Not avalaible |
S01-141 Oral
|
Temperature Dependent Flow Instabilities of Highly Filled Polymer Compounds Tomas Honek, B. Hausnerova, P. Saha
|
Not avalaible |
S01-57 Oral
|
Mold Filling Characteristics of Ceramic Injection Molding Mixtures Kenji Okada, Youichi Nagase
|
Not avalaible |
S01-133 Oral
|
A study on the interaction between fiber contents and properties of injection molded GF/PP composite plates N.M.Neves, A.J.Pontes, A.S.Pouzada
|
Not avalaible |
S01-71 Oral
|
Development of Novel Composites by Hot Compaction Ian M.Ward, P.J. Hine, B. Brew, M. Bonner
|
Not avalaible |
S01-66 Oral
|
Preparation and characterisation of biodegradable starch/PCL nanocomposite packaging materials Stewart McGlashan, Peter Halley
|
Not avalaible |
S01-377 Oral
|
Injection Moulding of Polymer/Clay Nanocomposites E. Turcott, A. Garcia-Rejon, Y. Simard
|
Not avalaible |
S01-98 Oral
|
Fiber orientation in short flow length parts: limitations of current predictions Charles L. Tucker III, Henry M. Huynh
|
Not avalaible |
S01-76 Oral
|
Rheology and crystallization behaviors of maleated polypropylene/clay nanocomposites Chong Min Koo, Mi Jung Kim, Min Ho Choi, Sang Ouk Kim, In Jae Chung
|
Not avalaible |
S01-289 Oral
|
Preparation and mechanical properties of polypropylene composites reinforced with combinations of continuous glass fiber and mica Ruofei Zhao, Gance Dai
|
Not avalaible |
S01-343 Oral
|
Polymerization Compounding Thermoset Composites: Application to Polyurethane/Fumed Silica Abdellatif Ait-Kadi, Charles Dubois
|
Not avalaible |
S01-60 Oral
|
Studies On PA6 Organic Rigid Particle Filled PP System Qi Wang, Zhe Chen
|
Not avalaible |
S01-270 Oral
|
Is Darcy's law a correct approximation for RTM modelling ? F. Boust, R. Torres, A. Poitou
|
Not avalaible |
S01-338 Oral
|
Articulated Resin Transfer Molding J.-H. Choi, C. K. H. Dharan
|
Not avalaible |
S01-160 Oral
|
Resin Flow during the Consolidation of Woven of Commingled Roving D. Pagé, P. Bates, T. Bui, H. Bonin
|
Not avalaible |
S01-255 Oral
|
Permeability Prediction for Industrial Textile Preforms F. Robitaille, A. Long, C. Rudd
|
Not avalaible |
S01-253 Oral
|
Optimization of Gate Location during Liquid Composite Mold Filling Processes using Hybrid Real Coded Genetic Algorithms Roopesh Mathur, Suresh G. Advani, Bruce Fink
|
Not avalaible |
S01-298 Oral
|
Discussion of a Closure Model for Flow-Induced Alignment of Fibers D. Mandal, S. Parks, C. Petty, A. Bénard
|
Not avalaible |
S01-267 Oral
|
Measurement and FE prediction of glass fibre orientation distributions for injection moulded products of increasing complexity B.R. Whiteside, P. D. Coates, S.L. Bubb, R.A. Duckett & P.J. Hine
|
Not avalaible |
S01-24 Oral
|
Fiber Orientation Control of Short-Fiber Reinforced Thermoplastics by Ram Extrusion Y. Sanomura, M. Kawamura
|
Not avalaible |
S01-137 Oral
|
Experimental Analysis and Computer Simulation of Pultrusion and Injection Pultrusion Processes Zhongman Ding, Shoujie Li, Liqun Xu, L. James Lee, Herbert Engelen
|
Not avalaible |
S01-328 Oral
|
Effects of Polymer Chains/Fine Particles Adsorption on Macroscopic Properties B. Haidar, K. Vuillaume, A. Vidal
|
Not avalaible |
S01-224 Oral
|
Preparing fire retardant Polypropylene-Clay-Nanocomposites by compounding Udo Wagenknecht, Bernd Kretzschmar, Gerd Reinhardt
|
Not avalaible |
S16-54 Oral
|
Numerical Simulation of Contraction and Expansion Flows of Langmuir Monolayers Evan Mitsoulis, Kostas Missirlis, John Argyropaidas
|
Not avalaible |
S16-317 Oral
|
Simulation And Experimental Results For Polymer Melt In Planar Hyperbolic Dies P. Olley, M.T. Martyn, R. Spares, D. Groves, P.D. Coates
|
Not avalaible |
S16-251 Oral
|
Modeling a Reactive Extrusion In a Twin-Screw Extruder Jean-Pierre Puaux, Philippe Cassagnau
|
Not avalaible |
S16-146 Oral
|
Three Dimensional Simulation of Axial Circle Flow Field In Non-Intermeshing TSE Xiaozheng Geng, Xiuqing Ma
|
Not avalaible |
S16-144 Oral
|
3D Flow Field Analysis of Combined Channel (KB plus Screw Bushing) in Co-Rotating TSE Peng Li, Xiaozheng Geng
|
Not avalaible |
S16-113 Oral
|
Development of Constitutive Equations for Solid Phase Deformation of Polymers With Time-Varying Temperature P. Caton-Rose, J. Sweeney, A.S.Wood, G.F. Rosala, P. D. Coates
|
Not avalaible |
S16-101 Oral
|
Optimum design technique for injection molding considering productivity Akio Takafuji, Takahiro Kubo, Atsushi Yokoyama, Hiroyuki Hamada
|
Not avalaible |
S16-110 Oral
|
Investigation of the process behavior of special mixing elements in twin-screw extruders H. Potente, K. Kretschmer, J. Hofmann, M. Senge, M. Mours, G. Scheel, Th. Winkelmann
|
Not avalaible |
S16-371 Oral
|
Theoretical Analysis and Experimental Study on Microfiberillar Morphology Development in PP/TLCP Blend Afshin Mousavi, Hossein Nazokdast, Faramarz Afshar Taromi
|
Not avalaible |
S16-207 Oral
|
Three-Dimensional Numerical Modeling of Co-Injection Molding Florin Iinca, Jean-Francois Hetu
|
Not avalaible |
S16-212 Oral
|
Fast solution for 3D injection moulding by a Discontinuous Space-Time Finite element method Thierry Coupez, Erwan Bigot, Julien Bruchon, Serge Batkam
|
Not avalaible |
S16-254 Oral
|
Mechanisms of viscous fingering of non-Newtonian fluids: application to injection moulding Brajesh Singh, Jalel Azaiez
|
Not avalaible |
S16-261 Oral
|
Stability analysis of injection molding flows Arjen Bogaerds, Anne Grillet, Gerrit Peters, Frank Baaijens
|
Not avalaible |
S01-242 Oral
|
Toughening of epoxy matrix by morphology spectrum concept Sung Chul Kim, Hyun Sung Min
|
Not avalaible |
S16-5 Oral
|
Simulation of melt flow in filled and partially filled sections of a co-rotating twin screw extruder M. Mours, M. Senge, V. Seidl, H.-G.Wagner, J. Hofmann
|
Not avalaible |
S01-271 Oral
|
Effects of filler migration on mechanical properties and conductivity of filled polymers Sadhan Jana, Chang Min Hong
|
Not avalaible |
S16-184 Oral
|
Three dimensional numerical simulation of viscoelastic planar contraction flow I. Sirakov, A. Ainser, J. Guillet
|
Not avalaible |
S16-100 Oral
|
Using Truncated Relaxation Spectra in the Simulation of Viscoelastic Flows Marie-Claude Heuzey, Paula Wood-Adams, André Fortin
|
Not avalaible |
S16-55 Oral
|
Die Drawing of Polyoxymethylene: A Finite Element Analysis M.S.Mirza, A.K.Taraiya, I.M.Ward, D.C.Barton
|
Not avalaible |
S16-364 Oral
|
Nonlinear Thin Film Flow of Newtonian and Non-Newtionian Fluids Roger E. Khayat, Kyu-Tae Kim
|
Not avalaible |
S16-134 Oral
|
Simulation of the Mobile Preform Reheat in Injection Stretch Blow Moulding Process A.Yousefi, R. DiRaddo, A. Bendada
|
Not avalaible |
S16-105 Oral
|
Analysis and Modeling of Microstructure Development Stefan Hoffmann, Walter Michaeli
|
Not avalaible |
S16-203 Oral
|
Mechanical property simulation of partially oriented composites using the Elementary Volume Concept G. Rüb, N.C. Davidson, B.Möginger, P. Eyerer
|
Not avalaible |
S16-315 Oral
|
Gas assisted injection moulding: 3D finite element modelling using a pseudo concentration method and experimental validation L. Johnson, P. Olley, P.D. Coates
|
Not avalaible |
S01-391 Oral
|
Preparation and characterization of epoxy-montmorillonite nanocomposites Lixin Wang,Wei Feng, A. Ait-Kadi Lixin Wang, Wei Feng, A. Ait-Kadi
|
Not avalaible |
S01-366 Oral
|
Fibre orientation effects on mechanical anisotropy in molded hybrid composites of PP/GF/CaCO3 J. Alexandrino Sousa, Orestes A. Ferro, Joaquim Cintra Jr
|
Not avalaible |
S01-303 Oral
|
Effects of various resin injection strategies on filling process in resin transfer molding Akbar Shojaei, S. Reza Ghaffarian, S. Mohammad Hossien Karimian
|
Not avalaible |
S01-292 Oral
|
Composite structure and acoustic effectiveness of polymer materials for automotive applications H.-J. Radusch, A.Wutzler, M.H.Wagner, V. Schulze Martin Luther
|
Not avalaible |
S16-367 Oral
|
Computational Study of Velocity Field In EZ Element of Buss KO-Kneader With CFD Method M. Mehranpour, H. Nazokdast, B. Dabir
|
Not avalaible |
S16-41 Oral
|
Numerical Computations of two-layer Poiseuille flow for Maxwell fluids Patrice Laure, Rudy Valette, Yves Demay, André Fortin
|
Not avalaible |